Disgruntled 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mr.goodwrench02 · 01-04-2013, 11:30 PM

Whats up guys, I am a little disgruntled. I own a 1967 c-10. This truck has a long history in my family. It was passed down through the generations. I finally saved it from being sold out of the family when my grandfather gave it to me. My dilemma is this: I flipped the truck about two months ago. I have beat a banged the dents that i could out of it managing to to save everything but the passenger fender which has already been replaced. But the cab is still twisted, drive able, but twisted. Even after twisting it back about two inches. Can anyone help me with a cab.

**jocko** · 01-04-2013, 11:38 PM

welcome mr. goodwrench. sorry to hear about the accident. when I first read it, I thought you meant you sold it!! (i.e. "flipped"). Anyhoo - I get it now.

there is a parts board and you'll find the members very helpful here. here's a link to the parts section -you can post a WTB (want to buy) ad there. You do need to be a paying member to buy/sell though, so keep that in mind.

http://67-72chevytrucks.com/vboard/f...ysprune=30&f=8

Also, consider this - once you swap a cab, you'll need to title the new cab and its associated VIN in your state. And ya gotta ask yourself - at that point is it still even the family jewel it once was if it's newly titled, non-original VIN, been rolled, etc etc. Might be time to punt and hunt for a new project to uphold the family legacy? Just a thought - of course understand if it's something you want to pull out all the stops to repair.

Again, welcome, and good luck in your search.

tjmeadows · 01-04-2013, 11:46 PM

Not sure how much difference there is, but I have a 69 cab in descent condition
Posted via Mobile Device

**jocko** · 01-05-2013, 12:17 AM

Hey mr. goodwrench - my apologies, I think i put out some bad gouge in post #2.

You can't post a WTB ad on the board if you do not subscribe - but you do not need to be a paying member to buy something from the parts board. Just wanted to clarify and correct. Sorry about that.

PanelDeland · 01-05-2013, 10:25 AM

All cabs are close.Minor differences in mirror location and such.Other differences are in the cowl(AC to Non AC cabs) roof(clearance lights) and small stuff.The cabs all interchange.

mr.goodwrench02 · 01-05-2013, 08:09 PM

Thanks for all the info guys. Greatly appreciated.

01-04-2013, 11:30 PM	#1
mr.goodwrench02 Registered User Join Date: Dec 2012 Location: Viadalia, Georgia Posts: 2	Disgruntled 67 Whats up guys, I am a little disgruntled. I own a 1967 c-10. This truck has a long history in my family. It was passed down through the generations. I finally saved it from being sold out of the family when my grandfather gave it to me. My dilemma is this: I flipped the truck about two months ago. I have beat a banged the dents that i could out of it managing to to save everything but the passenger fender which has already been replaced. But the cab is still twisted, drive able, but twisted. Even after twisting it back about two inches. Can anyone help me with a cab.

01-04-2013, 11:46 PM	#3
tjmeadows Registered User Join Date: Oct 2012 Location: clarksville tennessee Posts: 948	Re: Disgruntled 67 Not sure how much difference there is, but I have a 69 cab in descent condition Posted via Mobile Device

01-05-2013, 12:17 AM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Disgruntled 67 Hey mr. goodwrench - my apologies, I think i put out some bad gouge in post #2. You can't post a WTB ad on the board if you do not subscribe - but you do not need to be a paying member to buy something from the parts board. Just wanted to clarify and correct. Sorry about that.

01-05-2013, 10:25 AM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Disgruntled 67 All cabs are close.Minor differences in mirror location and such.Other differences are in the cowl(AC to Non AC cabs) roof(clearance lights) and small stuff.The cabs all interchange. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-05-2013, 08:09 PM	#6
mr.goodwrench02 Registered User Join Date: Dec 2012 Location: Viadalia, Georgia Posts: 2	Re: Disgruntled 67 Thanks for all the info guys. Greatly appreciated.

01-04-2013, 11:38 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Disgruntled 67 welcome mr. goodwrench. sorry to hear about the accident. when I first read it, I thought you meant you sold it!! (i.e. "flipped"). Anyhoo - I get it now. there is a parts board and you'll find the members very helpful here. here's a link to the parts section -you can post a WTB (want to buy) ad there. You do need to be a paying member to buy/sell though, so keep that in mind. http://67-72chevytrucks.com/vboard/f...ysprune=30&f=8 Also, consider this - once you swap a cab, you'll need to title the new cab and its associated VIN in your state. And ya gotta ask yourself - at that point is it still even the family jewel it once was if it's newly titled, non-original VIN, been rolled, etc etc. Might be time to punt and hunt for a new project to uphold the family legacy? Just a thought - of course understand if it's something you want to pull out all the stops to repair. Again, welcome, and good luck in your search. Last edited by jocko; 01-05-2013 at 12:14 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.