Is this the no spin sticker location?

[sigshooter]

Took my seat and floor mat out and noticed this glue on the back of the cab . Is this the location for the the no spin/positrac sticker location, and if so was it glued around the edge like this or was it a solid adhesive like a sticker?

[yelmer]

I know it is for c-20 and c-30 Detroit locker decal not sure for c-10

[60-66]

Heres the one in my 66 C10 .

[sigshooter]

Originally Posted by 60-66

Heres the one in my 66 C10 .

Looks like it is, the decal looks paper and o be glued around the edges on yours.

This is a parts truck, the rear wheels are frozen from the brakes, looks like I need to pull the cover and check for posi or limited slip. What did these trucks have? I am just familiar with the later 12 bolt posi units

[60-66]

They are glued on just like the marks on your truck. These same paper posi ID papers were used on the cars of these years and I have several photos of Impalas with the same glue marks

[sigshooter]

Originally Posted by 60-66

They are glued on just like the marks on your truck. These same paper posi ID papers were used on the cars of these years and I have several photos of Impalas with the same glue marks

Sweet! I can't wait to pull the cover and see what is hiding in there.... That $250.00 buy just keeps getting better!

Thanks for the info, I was pretty sure that was wht the glue meant

[LT1 Burb]

Here's a pic from my junk cab.

[1963c-10]

Here is a pic of the one I got from a 62. Its a steel plate held on w/4 Philips head screws. I believe the 60-63 were steel plates and not stickers. I think they went to stickers in 64. Im not sure though, just know that when I see a 60-63 down here and it has a posi it has the steel plate and the newer models I see have stickers. Maybe plant by plant change?

[60-66]

Im wondering what were these trucks, C20-C30s with this style Posi unit ? Any clearer pictures of the tags ?

[60-66]

This is from my blue 1960 1/2 ton. Different location same paper tag. These paper tags were dated late 1958 and they didn't change the date up though the 60s and possibly early 70s.

[1963c-10]

I can get a better pic tonight. Its sitting on the shelf at home and mine came from a 62 c-20

[1963c-10]

Heres the plate from the pic in post #8. 1962 c-20 is what I got from the owner of the truck on the chasis id. I thought the plate was steel at 1st, but upon closer inspection it is aluminum.

I purchased a NOS 17 spline posi for my 63 and planned on putting it on the cab for the posi designation.

Its stamped K S10 and the whole image is lightly engraved and painted.

[60-66]

Great picture, thanks for posting !! Do you remember what tonnage the truck it came from was ?

[1963c-10]

No, but I will ask the owner. Its a forum members truck that hes parting out.

Heres a pic that he posted of it...