68 C10 Manual Steer Info Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 09-18-2006, 11:30 PM

I'm doing some internet research for P/N's to get my manual steering box connected to the auto tilt-column I recently installed in my 68 Beater.

From my measurments, it looks like the column shaft is 3/4 dia- 36 spline. The steering box also looks like it's 3/4 dia but it has a pretty severe 'flat' machined so I'm assuming the spline count is the same.

Can anyone point me to some internet info that can confirm this so I can have some educated info when I call to get pricing & product info? Or possibly someone has purchased Borgeson joints for their steering & can chime in on what they used?

Thanks in advance . . ....

Primered_69 · 09-18-2006, 11:41 PM

xxl BOUGHT THE JOINTS FOR HIS SHAFT

SCOTI · 09-19-2006, 12:35 AM

Quote:

Originally Posted by Primered_69

xxl BOUGHT THE JOINTS FOR HIS SHAFT

He also used a later model style column.

I'm pretty sure that my column is 3/4dia & I did actually count 36 splines; it's the gear box that has me wondering. It's difficult to assume the spline count when almost 1/4 of the shaft is machined flat.

09-18-2006, 11:30 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,035	68 C10 Manual Steer Info Needed I'm doing some internet research for P/N's to get my manual steering box connected to the auto tilt-column I recently installed in my 68 Beater. From my measurments, it looks like the column shaft is 3/4 dia- 36 spline. The steering box also looks like it's 3/4 dia but it has a pretty severe 'flat' machined so I'm assuming the spline count is the same. Can anyone point me to some internet info that can confirm this so I can have some educated info when I call to get pricing & product info? Or possibly someone has purchased Borgeson joints for their steering & can chime in on what they used? Thanks in advance . . .... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-18-2006, 11:41 PM	#2
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Re: 68 C10 Manual Steer Info Needed xxl BOUGHT THE JOINTS FOR HIS SHAFT __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.