What did you get done 11/21/2010 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mongoose · 11-22-2010, 04:52 AM

wow... those cam bearings are shot....

softballnrd27 · 11-22-2010, 11:25 AM

I started to sand and prime the front end of the truck to shoot some black on it to match the rest of the truck but wasn't motivated to do more than 1 fender.

355bullet · 11-22-2010, 11:37 AM

did nothing, just helped my friends mark a trail for this fridays turkey trail

http://www.southwestdrags.com/forum/...t=12145&page=2

menace121978 · 11-22-2010, 11:57 AM

i didn't do anything besides finalizing my interior plans after having a nice long talk with Ken. thanks again buddy! you are a tremendous help

i feel a lot better knowing a plan has been set.

also guys... anyone looking for interior parts cheyenne pickup parts has got all those hard to find door panel pieces

http://www.parts123.com/parts123/yb....Z5Z5Z50000215a
http://www.parts123.com/parts123/yb....5Z5Z50000215a#

Jonboy · 11-22-2010, 12:18 PM

I pulled and cleaned up the interior out of my parts truck so I can install it in my '74. I put the headliner in yesterday afternoon, but had to wash the carpet and clean the seat, as well as the headliner trim. It's not a new interior, but the price is right. I am still up in the air about having black or white door panels and seat when the time comes, though.

Fixwhataintbroke · 11-22-2010, 04:44 PM

Did some 9man with the buds and accidentally broke one of them's foot. :/. Oh and got dumped, apparently my gf was more important than my trucks?

Slonaker · 11-22-2010, 05:49 PM

Quote:

Originally Posted by centexan

I only went to the pik-n-pull today and it was ok. There a lot of square bodies, but pretty picked over. I just luck out when I go. Last time I went I got a center console like the two you have for your 74. I guess it depends on what you're looking for. I haven't ever been to any of the other ones. Are they pretty good too?

I have been to them a LOT of times in the 10 years or so that I have had my truck. I only found ONE good dash pad in that time. I told my buddy to take it and I would get the nice one. A few months later he got rid of the truck, and I have never found another good dash pad.

Slonaker

wyattglock · 11-22-2010, 06:27 PM

Didn't get anything done on the truck yesterday. Today I took a bunch of scrap to the junkyard, and I found out that I get to go back to work after almost 2 months off! The doctor didn't like the idea of me going to work so soon, but my broken ankle is now just a sprain. So I might as well be able to earn some money on it.

justinburnett · 11-23-2010, 05:24 PM

absolutely nothing, but on 11-23 I got my truck back after having to have my starter housing machined down. Got to test out the 4x4 finally in the snow and ice. Works great. Going to go get my studs put on in a bit even though I don't think I need them, but it can't hurt. Might get motivated to get a stereo in there today too. Maybe.

Adams74Chevy · 11-23-2010, 06:01 PM

I put the shocks on the rear of the 73 K20 and fished the speaker wire out of the bottom of the drivers side door. This holiday weekend I hope get a few hours of solid work done on it...but I always fear Mr. Murphys law will sneak up and get me.

centexan · 11-23-2010, 06:02 PM

Quote:

Originally Posted by Slonaker

I have been to them a LOT of times in the 10 years or so that I have had my truck. I only found ONE good dash pad in that time. I told my buddy to take it and I would get the nice one. A few months later he got rid of the truck, and I have never found another good dash pad.

Slonaker

That sucks. I've only seen one other one in good shape in a yard here in Austin but they wanted a lot for it. I feel pretty lucky. I am thinking about dyeing it but it seems like a shame since it's so nice. I find all the good stuff in SA and hardly anything here in the Austin ones. Go figure.

justinburnett · 11-23-2010, 11:17 PM

I found one out where I live, oddly enough. Dash was in great shape. Everything else was either rusted all to crap or torn up and moldy. I think God must have been smiling on me that day. Then my starter went out, gas tank gauges and switch malfunctioned, reverse lights quit working, muffler blew a hole in it, lost my transfer case, and stereo died. Like literally within a week.... guess that was my payment.

Think I got it all done as of now. Going to replace the other muffler just so it matches next week, and then I think I'm done working on it for the winter. I hope. It'll get paint and body work and such in the spring.

Oh, gas gauge and switch still don't work but I'm going to have to live with it cause it's too cold to be crawling around in the snow underneath.

hitcher · 11-24-2010, 12:31 AM

picked up a used headache rack for $20 . only thing is that its for a later model truck which is narrower . welded some plates on the bottom and messed with it a little for a good fit . scuffed it up and painted it black but dont have pics of that yet .

rare86 · 11-24-2010, 12:51 AM

I picked up extended cab no 5.

Its an 86 GMC K10 with a 6.2 diesel. I have been looking for a squarebody diesel for quite some time, just never thought Id find one in an extended cab. Body and interior are excellent. Has a blown head gasket. Its the only one of these with a diesel in it that I know of.

hitcher · 11-24-2010, 01:05 AM

good find there rare86

SBTork · 11-24-2010, 04:15 AM

^^ yes, excellent find rare86. Not to get too far off topic, what are the plans for this one?

rare86 · 11-24-2010, 09:38 AM

Quote:

Originally Posted by SBTork

^^ yes, excellent find rare86. Not to get too far off topic, what are the plans for this one?

Thanks guys.Not a whole lot of plans really. This truck is near perfect. Theres not even a dent in the floor of the bed. It was used by a printing company. It has two dings the size of a dime, and the clear coat is peeling a little. Im gonna get the dings out and reclear it. Other than that, i just gotta get the head gaskets replace, and get it going again. Pretty much just wanna make it a driver. I may change wheels on it and go with 32x10.50s, but nothing extravagant. Just enough to fill the wheelwells properly.

hitcher · 11-24-2010, 10:31 PM

heres pics of my finished headache rack . managed to take theses just before it started getting dark . not bad for $20 and the paint was free from work .

justinburnett · 11-25-2010, 04:12 PM

I would love to have an extended cab! That's awesome!

*87 chevy silverado* · 11-26-2010, 10:47 AM

Quote:

Originally Posted by rare86

Thanks guys.Not a whole lot of plans really. This truck is near perfect. Theres not even a dent in the floor of the bed. It was used by a printing company. It has two dings the size of a dime, and the clear coat is peeling a little. Im gonna get the dings out and reclear it. Other than that, i just gotta get the head gaskets replace, and get it going again. Pretty much just wanna make it a driver. I may change wheels on it and go with 32x10.50s, but nothing extravagant. Just enough to fill the wheelwells properly.

is that a 4x4? looks good!

rare86 · 11-26-2010, 10:59 AM

It is a 4x4 which i really like about it,

*87 chevy silverado* · 11-26-2010, 11:48 AM

Quote:

Originally Posted by rare86

It is a 4x4 which i really like about it,

o cnt wait to see the end resalt

rare86 · 11-27-2010, 10:59 AM

hitcher, that headache rack came out nice for $20. Love the truck, those wheels look great on these trucks

hitcher · 11-27-2010, 12:38 PM

Quote:

Originally Posted by rare86

hitcher, that headache rack came out nice for $20. Love the truck, those wheels look great on these trucks

thanks . im always coming across bargains like that . the wheels are off a late model GMC i believe like an 06 or something . they were on the truck when i bought it and wanted to swap them for factory wheels and hubcaps but now they are growing on me

rare86 · 11-27-2010, 09:52 PM

Those wheels look great on these trucks, just need the hub caps to finish them off.

11-22-2010, 04:52 AM	#26
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done 11/21/2010 wow... those cam bearings are shot.... __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

11-22-2010, 11:25 AM	#27
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: What did you get done 11/21/2010 I started to sand and prime the front end of the truck to shoot some black on it to match the rest of the truck but wasn't motivated to do more than 1 fender. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

11-22-2010, 11:37 AM	#28
355bullet Registered User Join Date: Feb 2010 Location: el paso, tx Posts: 510	Re: What did you get done 11/21/2010 did nothing, just helped my friends mark a trail for this fridays turkey trail http://www.southwestdrags.com/forum/...t=12145&page=2 __________________ www.southwestdrags.com www.elpasocalendargirls.com www.msdignition.com www.atomicefi.com https://www.facebook.com/MSDperformance

11-22-2010, 11:57 AM	#29
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: What did you get done 11/21/2010 i didn't do anything besides finalizing my interior plans after having a nice long talk with Ken. thanks again buddy! you are a tremendous help i feel a lot better knowing a plan has been set. also guys... anyone looking for interior parts cheyenne pickup parts has got all those hard to find door panel pieces http://www.parts123.com/parts123/yb....Z5Z5Z50000215a http://www.parts123.com/parts123/yb....5Z5Z50000215a# __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-22-2010, 12:18 PM	#30
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: What did you get done 11/21/2010 I pulled and cleaned up the interior out of my parts truck so I can install it in my '74. I put the headliner in yesterday afternoon, but had to wash the carpet and clean the seat, as well as the headliner trim. It's not a new interior, but the price is right. I am still up in the air about having black or white door panels and seat when the time comes, though. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-22-2010, 04:44 PM	#31
Fixwhataintbroke Enthusiast Join Date: Jun 2010 Location: Graham, Wa. Posts: 192	Re: What did you get done 11/21/2010 Did some 9man with the buds and accidentally broke one of them's foot. :/. Oh and got dumped, apparently my gf was more important than my trucks? __________________ - Cole 1979 Chevy C30 w/ carb 454. 1992 Chevy K1500 w/ tbi 350. Sold 1997 Dodge Ram 1500 w/ Magnum 360 Sold "Good judgment comes from experience. Experience comes from poor judgment." - George Washington

11-22-2010, 06:27 PM	#33
wyattglock Registered User Join Date: Jul 2010 Location: Lafayette, IN Posts: 621	Re: What did you get done 11/21/2010 Didn't get anything done on the truck yesterday. Today I took a bunch of scrap to the junkyard, and I found out that I get to go back to work after almost 2 months off! The doctor didn't like the idea of me going to work so soon, but my broken ankle is now just a sprain. So I might as well be able to earn some money on it.

11-23-2010, 05:24 PM	#34
justinburnett Registered User Join Date: Sep 2010 Location: The Dalles, OR Posts: 392	Re: What did you get done 11/21/2010 absolutely nothing, but on 11-23 I got my truck back after having to have my starter housing machined down. Got to test out the 4x4 finally in the snow and ice. Works great. Going to go get my studs put on in a bit even though I don't think I need them, but it can't hurt. Might get motivated to get a stereo in there today too. Maybe.

11-23-2010, 06:01 PM	#35
Adams74Chevy Registered User Join Date: Mar 2009 Location: MD Posts: 417	Re: What did you get done 11/21/2010 I put the shocks on the rear of the 73 K20 and fished the speaker wire out of the bottom of the drivers side door. This holiday weekend I hope get a few hours of solid work done on it...but I always fear Mr. Murphys law will sneak up and get me. __________________ 2006 Silverado Crew Cab 1500 4x4 5.3L automatic 1986 M1008 CUCV 6.2L Detroit Diesel TH400 4.56 Detroit Locker rear NP208 1973 K20 "Silverado" 350ci, HEI, TH350, NP203 with 2wd conversion, A/C, power windows,tilt wheel, dual tanks. My '73ish K20 thread My 5yo son claims it as his. 1987 V20 Custom Deluxe 350 TH400 NP208 "farm truck" getting parted out. 2016 Nissan Altima grocery getter/commuter

11-23-2010, 11:17 PM	#37
justinburnett Registered User Join Date: Sep 2010 Location: The Dalles, OR Posts: 392	Re: What did you get done 11/21/2010 I found one out where I live, oddly enough. Dash was in great shape. Everything else was either rusted all to crap or torn up and moldy. I think God must have been smiling on me that day. Then my starter went out, gas tank gauges and switch malfunctioned, reverse lights quit working, muffler blew a hole in it, lost my transfer case, and stereo died. Like literally within a week.... guess that was my payment. Think I got it all done as of now. Going to replace the other muffler just so it matches next week, and then I think I'm done working on it for the winter. I hope. It'll get paint and body work and such in the spring. Oh, gas gauge and switch still don't work but I'm going to have to live with it cause it's too cold to be crawling around in the snow underneath.

11-24-2010, 12:31 AM	#38
hitcher Registered User Join Date: Jul 2010 Location: lawton ok Posts: 190	Re: What did you get done 11/21/2010 picked up a used headache rack for $20 . only thing is that its for a later model truck which is narrower . welded some plates on the bottom and messed with it a little for a good fit . scuffed it up and painted it black but dont have pics of that yet . Attached Images

11-24-2010, 12:51 AM	#39
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: What did you get done 11/21/2010 I picked up extended cab no 5. Its an 86 GMC K10 with a 6.2 diesel. I have been looking for a squarebody diesel for quite some time, just never thought Id find one in an extended cab. Body and interior are excellent. Has a blown head gasket. Its the only one of these with a diesel in it that I know of. Attached Images __________________ If it has a motor, it has my attention.

11-24-2010, 01:05 AM	#40
hitcher Registered User Join Date: Jul 2010 Location: lawton ok Posts: 190	Re: What did you get done 11/21/2010 good find there rare86

11-24-2010, 04:15 AM	#41
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: What did you get done 11/21/2010 ^^ yes, excellent find rare86. Not to get too far off topic, what are the plans for this one? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

11-24-2010, 10:31 PM	#43
hitcher Registered User Join Date: Jul 2010 Location: lawton ok Posts: 190	Re: What did you get done 11/21/2010 heres pics of my finished headache rack . managed to take theses just before it started getting dark . not bad for $20 and the paint was free from work . Attached Images



Register or Log In To remove these advertisements.

11-25-2010, 04:12 PM	#44
justinburnett Registered User Join Date: Sep 2010 Location: The Dalles, OR Posts: 392	Re: What did you get done 11/21/2010 I would love to have an extended cab! That's awesome!

11-26-2010, 10:59 AM	#46
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: What did you get done 11/21/2010 It is a 4x4 which i really like about it, __________________ If it has a motor, it has my attention.

11-27-2010, 10:59 AM	#48
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: What did you get done 11/21/2010 hitcher, that headache rack came out nice for $20. Love the truck, those wheels look great on these trucks __________________ If it has a motor, it has my attention.

11-27-2010, 09:52 PM	#50
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: What did you get done 11/21/2010 Those wheels look great on these trucks, just need the hub caps to finish them off. __________________ If it has a motor, it has my attention.

Register or Log In To remove these advertisements.