Rams horn exhaust manifolds for 67' C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Coach · 12-24-2014, 02:43 AM

I ordered a set of straight dump Smoothie Rams Horn exhaust manifolds from Classic Industries. I spoke to one of the techs and gave him all the specs for my truck and he assured me they would work for my truck (2wd). I checked the cross member and there looks to be enough room. I have a great exhaust shop here in town that is going to install them with a Magnaflow dual exhaust. Does anyone have photos of their truck with these type of exhaust manifolds?

**michael bustamante** · 12-24-2014, 12:48 PM

interested too. i like those horns

**67 cst swb** · 12-24-2014, 01:54 PM

Your engine mount towers appear to be in the front holes.
I am interested to see if straight dump manifold will work.

72freak · 12-25-2014, 06:21 AM

I have put straight dump 2.5 manifolds on every 60-72 truck I have owned. 2x4, 4x4, truck, burb and blazer. They work fine with NO issues at all. Drivers side has to turn a little sharp as soon as you exit the manifold but any exhaust shop worth a hoot can make the turn. No pictures on hand.

Coach · 12-31-2014, 12:50 AM

Got a call from my exhaust shop today. Happy to report that the straight dump manifolds fit great with no issues. I am picking up the truck tomorrow, so I will post some photos then. For those interested, these silver ceramic coated manifolds were $209.99 through Classic Industries and they were delivered in less than a week.

**1970 CST Short Wide** · 12-31-2014, 11:42 AM

I see your in Brentwood. You useing Brentwood Muffler? Is BIG Jerry still there? Havent seen or heard from him in a while, he used to be on here from time to time

Coach · 12-31-2014, 12:37 PM

That's the place - Jerry is still there, he installed my crate engine a few months back.

Jahloha · 12-31-2014, 04:35 PM

Quote:

Originally Posted by Coach

That's the place - Jerry is still there, he installed my crate engine a few months back.

What crate engine did you go with?

I also have been eyeing these manifolds.

**1970 CST Short Wide** · 12-31-2014, 06:00 PM

Quote:

Originally Posted by Coach

That's the place - Jerry is still there, he installed my crate engine a few months back.

He's a Hell of a nice guy, Tell him Steve in Pittsburg said HI .

Coach · 12-31-2014, 07:02 PM

Hey Steve, I will let him know. Jason, I put in a Chevy Performance crate 350/290hp. Went through FH Dailey Chevrolet in San Leandro, Ca. I love the engine, plenty of power, no complaints so far (installed in October).

R.L. · 12-31-2014, 08:56 PM

Jegs has ram horns in chrome for 159.99, thinking about a set for my Nova.

wick89gt · 01-01-2015, 01:25 PM

Quote:

Originally Posted by 1970 CST Short Wide

He's a Hell of a nice guy, Tell him Steve in Pittsburg said HI .

Off topic but had to chime in here. I'm in Pittsburgh PA now but used to live right in Concord California. I guess pretty much behind where you're from. Small world. Haha. I was in the military housing that bordered the weapons station fields.

Coach · 01-01-2015, 03:23 PM

Small world!! Hope the weather is treating you well in PA right now.

Coach · 01-01-2015, 03:41 PM

Here's a photo of the new rams horn manifolds.

wick89gt · 01-01-2015, 03:58 PM

Quote:

Originally Posted by Coach

Small world!! Hope the weather is treating you well in PA right now.

Well, it was but has seemed to finally turn to winter all of a sudden. Single diget night temps and twenties during the day.

hdff · 01-01-2015, 04:15 PM

i'm curious what the difference in your exhaust sound is between the 2. the 1st pic looks like you had long tubes. are the manifolds the only thing that you changed or did you change mufflers also. i looked at the classic cataloge on line but did not see any ram horns. do you know off hand if they have them for a big block and was that 209 a pair or each...

Coach · 01-01-2015, 05:00 PM

Not sure if they have them for Big Blocks. They were $209.99 for the pair. I used to have long headers and a 3" exhaust. I changed to exhaust manifolds and a 2.5" Magnaflow dual exhaust with 18" mufflers. The sound is a smooth deep tone, way better than what I had before.

12-24-2014, 02:43 AM	#1
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Rams horn exhaust manifolds for 67' C10 I ordered a set of straight dump Smoothie Rams Horn exhaust manifolds from Classic Industries. I spoke to one of the techs and gave him all the specs for my truck and he assured me they would work for my truck (2wd). I checked the cross member and there looks to be enough room. I have a great exhaust shop here in town that is going to install them with a Magnaflow dual exhaust. Does anyone have photos of their truck with these type of exhaust manifolds? Attached Images __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

12-24-2014, 12:48 PM	#2
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Rams horn exhaust manifolds for 67' C10 interested too. i like those horns __________________ 1967custom

12-24-2014, 01:54 PM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Rams horn exhaust manifolds for 67' C10 Your engine mount towers appear to be in the front holes. I am interested to see if straight dump manifold will work. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 12-26-2014 at 02:54 PM.

12-25-2014, 06:21 AM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rams horn exhaust manifolds for 67' C10 I have put straight dump 2.5 manifolds on every 60-72 truck I have owned. 2x4, 4x4, truck, burb and blazer. They work fine with NO issues at all. Drivers side has to turn a little sharp as soon as you exit the manifold but any exhaust shop worth a hoot can make the turn. No pictures on hand. __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

12-31-2014, 12:50 AM	#5
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 Got a call from my exhaust shop today. Happy to report that the straight dump manifolds fit great with no issues. I am picking up the truck tomorrow, so I will post some photos then. For those interested, these silver ceramic coated manifolds were $209.99 through Classic Industries and they were delivered in less than a week. __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

12-31-2014, 11:42 AM	#6
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,107	Re: Rams horn exhaust manifolds for 67' C10 I see your in Brentwood. You useing Brentwood Muffler? Is BIG Jerry still there? Havent seen or heard from him in a while, he used to be on here from time to time __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

12-31-2014, 12:37 PM	#7
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 That's the place - Jerry is still there, he installed my crate engine a few months back. __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

12-31-2014, 07:02 PM	#10
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 Hey Steve, I will let him know. Jason, I put in a Chevy Performance crate 350/290hp. Went through FH Dailey Chevrolet in San Leandro, Ca. I love the engine, plenty of power, no complaints so far (installed in October). __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

12-31-2014, 08:56 PM	#11
R.L. Registered User Join Date: Sep 2008 Location: Mobile, Al. Posts: 687	Re: Rams horn exhaust manifolds for 67' C10 Jegs has ram horns in chrome for 159.99, thinking about a set for my Nova.

01-01-2015, 03:23 PM	#13
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 Small world!! Hope the weather is treating you well in PA right now. __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

01-01-2015, 03:41 PM	#14
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 Here's a photo of the new rams horn manifolds. Attached Images __________________ 1967 Chevy C10 Stepside SWB - 350/700r4

01-01-2015, 04:15 PM	#16
hdff Registered User Join Date: Apr 2007 Location: pasadena,TEXAS Posts: 880	Re: Rams horn exhaust manifolds for 67' C10 i'm curious what the difference in your exhaust sound is between the 2. the 1st pic looks like you had long tubes. are the manifolds the only thing that you changed or did you change mufflers also. i looked at the classic cataloge on line but did not see any ram horns. do you know off hand if they have them for a big block and was that 209 a pair or each... __________________ 1971 Cheyenne SWB 402BB, 700R4, 3.73 posi, PS, PB, A/C, Tilt, Tach "Wanda" Don't argue with idiots, People watching may not be able to tell the difference... There's someone in my head........But it's not me...... cheap tricks thread great info here!! http://67-72chevytrucks.com/vboard/s...d.php?t=489394 Last edited by hdff; 01-01-2015 at 04:30 PM.

01-01-2015, 05:00 PM	#17
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Rams horn exhaust manifolds for 67' C10 Not sure if they have them for Big Blocks. They were $209.99 for the pair. I used to have long headers and a 3" exhaust. I changed to exhaust manifolds and a 2.5" Magnaflow dual exhaust with 18" mufflers. The sound is a smooth deep tone, way better than what I had before. __________________ 1967 Chevy C10 Stepside SWB - 350/700r4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.