'75stepside' - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 01-28-2003, 06:57 PM

where did you get your brakets and pullies and how much were they. do you have ones for the powersteering pump too?

**Captkaos** · 01-28-2003, 07:02 PM

Looks like March Performance if I had to guess... http://www.marchperf.com

75stepside · 01-28-2003, 08:12 PM

the pulleys and the brackets are all march perf. i got the sets all from summitracing... the pulleys were $168 (item# MCH-6070) the bracket was $84 (item# MCH-20120) and believe this or not, the SINGLE pulley for the pwr steering was $45 alone! i did not get the brackets for the pwr steering YET!!! ...

low 84 · 01-28-2003, 08:23 PM

so the crank, water pump, power steering and alt pump pulleys were 168 total? and then the alt bracket (bottum part and rod) were $84?

that seems alright considering how bad a$$ they look. i just read your web site to man. you have done a hella lotta work on that thing, its lookin sweet.

75stepside · 01-28-2003, 08:28 PM

low84 thanks for the kind words... yeah, the $168 gets you the crank, alt, and waterpump pulleys... just make sure when you order that you get the set that goes with the short or long h20 pump (whichever you have) and one set has a three groove pulley for A/C and one for non-A/C. yeah, the alt bracket comes as a set as well; bracket, rod and hardware...

good luck!

75stepside · 01-28-2003, 08:31 PM

here's the image from summit's website:

LOHRTBT · 01-28-2003, 08:34 PM

I sure wish I would have had the money to get the chrome water pump on mine before it went in. That and the pullies!

Very nice

75stepside · 01-28-2003, 08:37 PM

...please dont mistake my water pump for chrome ... that's a polished alum water pump

i didn't want to have to replace a chrome water pump after a few years...

LOHRTBT · 01-28-2003, 08:52 PM

By the way..Your progress makes me want to go tear my truck apart!! hahaa
Beautiful work man.

LOHRTBT · 01-28-2003, 08:53 PM

Quote:

Originally posted by 75stepside
...please dont mistake my water pump for chrome ... that's a polished alum water pump i didn't want to have to replace a chrome water pump after a few years...

Did you polish it or purchase it/? I had one but they sent me a short and I needed a long pump

Or I would have had it .Damn those are high$$$$ $140 and that was manager wholesale cost!! haah

**swervin ervin** · 01-28-2003, 08:59 PM

It sure in nice. What I would give to be able to use these, but they don't make anything for the A.I.R. pump setup.

75stepside · 01-28-2003, 09:09 PM

yeah, i bought the pump polished... it was an incredible $180... which sucks... but the look is awesome....

*racedvl* · 01-28-2003, 09:39 PM

Man that sure is sharp! So sharp, it hurts my eyes. . .

low 84 · 01-28-2003, 10:07 PM

man that alt set up looks cooler and cooler every time i see it. i gotta get that. so you tighten the belt by threadin the rod out some, i guess?

79BIG10 · 01-29-2003, 04:09 PM

Damn that's sweet looking!!!

01-28-2003, 06:57 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	'75stepside' where did you get your brakets and pullies and how much were they. do you have ones for the powersteering pump too? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-28-2003, 07:02 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Looks like March Performance if I had to guess... http://www.marchperf.com __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-28-2003, 08:23 PM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	so the crank, water pump, power steering and alt pump pulleys were 168 total? and then the alt bracket (bottum part and rod) were $84? that seems alright considering how bad a$$ they look. i just read your web site to man. you have done a hella lotta work on that thing, its lookin sweet. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-28-2003, 08:31 PM	#6
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	here's the image from summit's website: Attached Images

01-28-2003, 08:34 PM	#7
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I sure wish I would have had the money to get the chrome water pump on mine before it went in. That and the pullies! Very nice __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-28-2003, 08:12 PM	#3
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	the pulleys and the brackets are all march perf. i got the sets all from summitracing... the pulleys were $168 (item# MCH-6070) the bracket was $84 (item# MCH-20120) and believe this or not, the SINGLE pulley for the pwr steering was $45 alone! i did not get the brackets for the pwr steering YET!!! ...

01-28-2003, 08:28 PM	#5
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	low84 thanks for the kind words... yeah, the $168 gets you the crank, alt, and waterpump pulleys... just make sure when you order that you get the set that goes with the short or long h20 pump (whichever you have) and one set has a three groove pulley for A/C and one for non-A/C. yeah, the alt bracket comes as a set as well; bracket, rod and hardware... good luck!

01-28-2003, 08:37 PM	#8
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	...please dont mistake my water pump for chrome ... that's a polished alum water pump i didn't want to have to replace a chrome water pump after a few years...

01-28-2003, 08:52 PM	#9
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	By the way..Your progress makes me want to go tear my truck apart!! hahaa Beautiful work man. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

01-28-2003, 08:59 PM	#11
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	It sure in nice. What I would give to be able to use these, but they don't make anything for the A.I.R. pump setup. __________________ Mike 1985 Chevy C-10

01-28-2003, 09:09 PM	#12
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	yeah, i bought the pump polished... it was an incredible $180... which sucks... but the look is awesome....

01-28-2003, 09:39 PM	#13
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Man that sure is sharp! So sharp, it hurts my eyes. . .

01-28-2003, 10:07 PM	#14
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	man that alt set up looks cooler and cooler every time i see it. i gotta get that. so you tighten the belt by threadin the rod out some, i guess? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-29-2003, 04:09 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Damn that's sweet looking!!! __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.