?? DOUG NASH Overdrive ???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 02-09-2005, 12:08 PM

Picked up this nice Doug Nash Overdrive unit. It is kind of neat in that it utilizes a drive shaft in the front instead of direct bolting up to the rear of a transmission. You could hook it up to any transmission which is perfect---Turbo 350, old 4 speed, Turbo 400, etc. It has mounts for attaching to an upper &/or lower crossmember which makes placement a piece of cake. You could probably utilize it in place of the carrier bearing. Probably too long for a short bed or blazer but perfect for a LWB or Longhorn truck. Believe it is rated to handle big HP. Electronically operated so no extra holes in the floor.
Any idea of worth if I should put it up for sale?????

junkyardjohn · 02-09-2005, 12:19 PM

SHOOT .. I MAY BE INTERESTED. I NEED SOMETHING LIKE THAT FOR MY OLD TOWTRUCK. CAN YOU POST ANY PICTURES??

JOHN

1969K10 · 02-09-2005, 01:23 PM

I think its worth about $50

And you need to sell it to me

I have no idea what its really worth, sorry

EdB · 02-09-2005, 02:00 PM

Pm Sent.

EdB

**jamie72** · 02-09-2005, 06:32 PM

stop braggin`

LUV2XCLR8 · 02-09-2005, 06:52 PM

I'LL GIVE YA $50.01

SOUND REALLY

HUCK

NO IDEA OF THE VALUE

Huck · 02-09-2005, 07:47 PM

Trying to post a picture ---while continuing to get "502 Communication delay errors"

3 on the tree · 02-09-2005, 07:56 PM

If I remember correctly, this is the same as a Gear Vendors unit, used to be called Hone Overdrive. New ones are 1500 and up I believe.

67chev · 02-10-2005, 06:00 AM

PM Sent

70short · 02-10-2005, 01:14 PM

I used to have A 84 corvette with an auto. The doug nash overdrive was installed in all the manual vette's from 84-88 ????

sorry I had A memory slipage

time for another BEEEEEEEEEEEER. I heard they were not all that reliable but there were alot of them out there. And I never knew anybody that had to replace one. I hope I was A little bit of help.

Gary

02-09-2005, 12:08 PM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	?? DOUG NASH Overdrive ???? Picked up this nice Doug Nash Overdrive unit. It is kind of neat in that it utilizes a drive shaft in the front instead of direct bolting up to the rear of a transmission. You could hook it up to any transmission which is perfect---Turbo 350, old 4 speed, Turbo 400, etc. It has mounts for attaching to an upper &/or lower crossmember which makes placement a piece of cake. You could probably utilize it in place of the carrier bearing. Probably too long for a short bed or blazer but perfect for a LWB or Longhorn truck. Believe it is rated to handle big HP. Electronically operated so no extra holes in the floor. Any idea of worth if I should put it up for sale?????

02-09-2005, 12:19 PM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	SHOOT .. I MAY BE INTERESTED. I NEED SOMETHING LIKE THAT FOR MY OLD TOWTRUCK. CAN YOU POST ANY PICTURES?? JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-09-2005, 01:23 PM	#3
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	I think its worth about $50 And you need to sell it to me I have no idea what its really worth, sorry __________________ 1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current 1969 K20 - V8, 465, 221, Eaton, D44 2012-current Nothin' but drums on all 4 corners! past horses in the stable 72 C10-short step (97-02), 68 C10-long fleet (06-12)

02-09-2005, 06:32 PM	#5
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	stop braggin` __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

02-09-2005, 06:52 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	I'LL GIVE YA $50.01 SOUND REALLY HUCK NO IDEA OF THE VALUE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-09-2005, 02:00 PM	#4
EdB Registered User Join Date: Jan 2003 Location: Gulfport Ms Posts: 401	Pm Sent. EdB

02-09-2005, 07:47 PM	#7
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Picture Trying to post a picture ---while continuing to get "502 Communication delay errors" Attached Images

02-09-2005, 07:56 PM	#8
3 on the tree Registered User Join Date: Oct 2004 Posts: 393	If I remember correctly, this is the same as a Gear Vendors unit, used to be called Hone Overdrive. New ones are 1500 and up I believe.

02-10-2005, 06:00 AM	#9
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	PM Sent __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

02-10-2005, 01:14 PM	#10
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	I used to have A 84 corvette with an auto. The doug nash overdrive was installed in all the manual vette's from 84-88 ???? sorry I had A memory slipage time for another BEEEEEEEEEEEER. I heard they were not all that reliable but there were alot of them out there. And I never knew anybody that had to replace one. I hope I was A little bit of help. Gary __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.