how to run open headers by a flip of switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 02-07-2009, 02:18 AM

well i have stock manifolds going into 40 series flowmasters.. i want to get headers since the swap will be easy to do since front clip is off... i wanna be able to uncap them by the flip of a switch so i can run open headers to scream get out the way..then for normal cruising flip the switch again and its kinda quieter with the flowmasters....is that possible and how do you do it?

Critter · 02-07-2009, 02:23 AM

Quote:

Originally Posted by tim21391

well i have stock manifolds going into 40 series flowmasters.. i want to get headers since the swap will be easy to do since front clip is off... i wanna be able to uncap them by the flip of a switch so i can run open headers to scream get out the way..then for normal cruising flip the switch again and its kinda quieter with the flowmasters....is that possible and how do you do it?

If I am following you correctly, you want to put a "Y" into each of your pipes and one of these on each "Y"

http://store.summitracing.com/partde...5&autoview=sku

petey-pablo · 02-07-2009, 07:55 AM

Critter's got it right that is what I plan on doing on my truck here is a direct link to quicktimeperformance with some videos and the are several members on here who have installed something like this before I couldnt find the tread but it looked sweet...........

http://quicktimeperformance.com/Media/video.php

tim21391 · 02-08-2009, 01:11 PM

ya i am doing the drag race at the old airport in salina.. its set up for 1/8 mile and i want open headers for that and then during the summer...but just crusing around i want to have to flip the switch to be able to have it go threw the flowmasters....is this what i need??? and how do i fab up the headers for this

72BlckButy · 02-08-2009, 01:30 PM

Electric cutouts, that's how that will be accomplished. Copperhead had a set on it. Just do a internet search for electric cutouts, and you should find a few that are available.

fastom · 02-08-2009, 06:08 PM

This is my setup!

Fastfun · 02-08-2009, 06:30 PM

Check out the link

http://www.quicktimeperformance.com/QTEC/index.php

**Hart_Rod** · 02-08-2009, 06:48 PM

Quote:

Originally Posted by fastom

This is my setup!

Do you have an X or H pipe also?

eightbanger · 02-08-2009, 07:02 PM

Dam!! I want these now. Looks like fitting would need to be done by an exhaust shop?

If you do get yours done anytime soon Petey, let us know how you get on.

Fastom we need a vid of how she sounds.

Wreckless_71 · 02-08-2009, 07:32 PM

fastom that is a clean lookin set-up... i like it

02-07-2009, 02:18 AM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	how to run open headers by a flip of switch well i have stock manifolds going into 40 series flowmasters.. i want to get headers since the swap will be easy to do since front clip is off... i wanna be able to uncap them by the flip of a switch so i can run open headers to scream get out the way..then for normal cruising flip the switch again and its kinda quieter with the flowmasters....is that possible and how do you do it? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-07-2009, 07:55 AM	#3
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: how to run open headers by a flip of switch Critter's got it right that is what I plan on doing on my truck here is a direct link to quicktimeperformance with some videos and the are several members on here who have installed something like this before I couldnt find the tread but it looked sweet........... http://quicktimeperformance.com/Media/video.php __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

02-08-2009, 01:11 PM	#4
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: how to run open headers by a flip of switch ya i am doing the drag race at the old airport in salina.. its set up for 1/8 mile and i want open headers for that and then during the summer...but just crusing around i want to have to flip the switch to be able to have it go threw the flowmasters....is this what i need??? and how do i fab up the headers for this __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-08-2009, 01:30 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: how to run open headers by a flip of switch Electric cutouts, that's how that will be accomplished. Copperhead had a set on it. Just do a internet search for electric cutouts, and you should find a few that are available. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-08-2009, 06:08 PM	#6
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: how to run open headers by a flip of switch This is my setup! Attached Images

02-08-2009, 06:30 PM	#7
Fastfun Registered User Join Date: Jun 2005 Location: Scottsdale, AZ Posts: 615	Re: how to run open headers by a flip of switch Check out the link http://www.quicktimeperformance.com/QTEC/index.php

02-08-2009, 07:02 PM	#9
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: how to run open headers by a flip of switch Dam!! I want these now. Looks like fitting would need to be done by an exhaust shop? If you do get yours done anytime soon Petey, let us know how you get on. Fastom we need a vid of how she sounds. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

02-08-2009, 07:32 PM	#10
Wreckless_71 Registered User Join Date: Apr 2007 Location: Kelso, WA Posts: 363	Re: how to run open headers by a flip of switch fastom that is a clean lookin set-up... i like it __________________ 1972 K10 4" lift, 35’s, 383 stroker, 700r4, current project. 1971 C10 3"/5" static drop, 355/350. "La Bamba.” The current daily driver.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.