Looking For a Picture of a Truck with Factory Clutch and a Brake Booster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cericd** · 12-31-2020, 03:44 PM

My 1970 C10 has a 3 OTT and I just added a factory brake booster and disc/drum master cylinder which is causing the brake pedal to sit several inches lower than the clutch pedal. I have another thread going trying to find the correct way to solve this issue and have received a few answers. Some people have said that the brake pedal on a truck with a brake booster normally sits lower than the clutch pedal.

In this thread I am trying to find someone with a photo of a truck that came factory with a manual transmission and a brake booster, to see if the pedals actually sat even with each other or if they were offset with the brake pedal being lower.

Luvlegs · 12-31-2020, 04:37 PM

72 C10 3OTT - I did add booster though.. I THINK I took it out of a 72....

Willys_MB · 12-31-2020, 04:51 PM

The brake pedal will move down when the truck is running and the booster is active, FYI

**cericd** · 12-31-2020, 04:59 PM

Hey luvlegs, thanks for the pics. How much lower would you say that the brake pedal is from the clutch?

Andy4639 · 12-31-2020, 06:34 PM

Here is my pedals. Clutch is 7" off the floor and the brake is 5-3/4".

**cericd** · 12-31-2020, 06:41 PM

Thanks for the pics and measurements Andy. Did your truck come from the factory with a booster or did you add it?

Luvlegs · 12-31-2020, 06:50 PM

Mines the same as Andy's

Andy4639 · 12-31-2020, 07:00 PM

Quote:

Originally Posted by cericd

Thanks for the pics and measurements Andy. Did your truck come from the factory with a booster or did you add it?

I added the booster. I just had a whole 86 front disc brake system installed back this summer. Master cylinder, all the way down to the pads.

12-31-2020, 03:44 PM	#1
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,161	Looking For a Picture of a Truck with Factory Clutch and a Brake Booster My 1970 C10 has a 3 OTT and I just added a factory brake booster and disc/drum master cylinder which is causing the brake pedal to sit several inches lower than the clutch pedal. I have another thread going trying to find the correct way to solve this issue and have received a few answers. Some people have said that the brake pedal on a truck with a brake booster normally sits lower than the clutch pedal. In this thread I am trying to find someone with a photo of a truck that came factory with a manual transmission and a brake booster, to see if the pedals actually sat even with each other or if they were offset with the brake pedal being lower. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

12-31-2020, 04:37 PM	#2
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster 72 C10 3OTT - I did add booster though.. I THINK I took it out of a 72.... Attached Images __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

12-31-2020, 04:51 PM	#3
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster The brake pedal will move down when the truck is running and the booster is active, FYI __________________ 1968 GMC C2500 Long Bed Fleetside

12-31-2020, 04:59 PM	#4
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,161	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster Hey luvlegs, thanks for the pics. How much lower would you say that the brake pedal is from the clutch? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

12-31-2020, 06:34 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster Here is my pedals. Clutch is 7" off the floor and the brake is 5-3/4". Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-31-2020, 06:41 PM	#6
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,161	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster Thanks for the pics and measurements Andy. Did your truck come from the factory with a booster or did you add it? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

12-31-2020, 06:50 PM	#7
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Looking For a Picture of a Truck with Factory Clutch and a Brake Booster Mines the same as Andy's __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.