Differences in 72 4x4 swb frame and 67 gmc 2wd swb frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

donelan07 · 02-18-2009, 12:52 PM

I have a rusted out 72 4x4 frame and found a 1967 2wd gmc frame with rear leaf springs. What would be the difference besides the front end? Easy swap or not? Thanks

jbristo67 · 02-18-2009, 01:10 PM

Quote:

Originally Posted by donelan07

I have a rusted out 72 4x4 frame and found a 1967 2wd gmc frame with rear leaf springs. What would be the difference besides the front end? Easy swap or not? Thanks

Wont be to bad if you can fab the brackets you need

**special-K** · 02-19-2009, 03:53 PM

Yes,it`s all doable,as long as all the 4wd specific stuff is usable.You need the motor & transfer case crossmembers.The frame tapers in on a 4wd,so the springs set outward on the axles more on the 2wd.If you`re using the rear from the 4wd the leaf saddles will need relocated.`67s don`t have a dimpled rame to mount a`68-up power steering box.You need to space the box off the frame or dimple the frame.

donelan07 · 03-18-2009, 05:02 PM

Attaching Front Leaf Springs. I noticed on the 67 frame I picked up the frame isn't flat where the back shackel on the front leaf spring would attach what would you do to fix this problem? Weld in a plate?

GMCMAX · 03-18-2009, 10:50 PM

Heat it, flatten it, drill the hole for the shackle; I put a small plate on the outside of mine.

02-18-2009, 12:52 PM	#1
donelan07 Active Member Join Date: Dec 2004 Location: Brookings, SD Posts: 202	Differences in 72 4x4 swb frame and 67 gmc 2wd swb frame? I have a rusted out 72 4x4 frame and found a 1967 2wd gmc frame with rear leaf springs. What would be the difference besides the front end? Easy swap or not? Thanks __________________ _________________________________ 1972 Chevy SWB 4x4 350 4speed

02-19-2009, 03:53 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Differences in 72 4x4 swb frame and 67 gmc 2wd swb frame? Yes,it`s all doable,as long as all the 4wd specific stuff is usable.You need the motor & transfer case crossmembers.The frame tapers in on a 4wd,so the springs set outward on the axles more on the 2wd.If you`re using the rear from the 4wd the leaf saddles will need relocated.`67s don`t have a dimpled rame to mount a`68-up power steering box.You need to space the box off the frame or dimple the frame. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-18-2009, 05:02 PM	#4
donelan07 Active Member Join Date: Dec 2004 Location: Brookings, SD Posts: 202	Re: Differences in 72 4x4 swb frame and 67 gmc 2wd swb frame? Attaching Front Leaf Springs. I noticed on the 67 frame I picked up the frame isn't flat where the back shackel on the front leaf spring would attach what would you do to fix this problem? Weld in a plate? __________________ _________________________________ 1972 Chevy SWB 4x4 350 4speed

03-18-2009, 10:50 PM	#5
GMCMAX Active Member Join Date: Jan 2006 Location: Lower Mid-East Ca. Posts: 326	Re: Differences in 72 4x4 swb frame and 67 gmc 2wd swb frame? Heat it, flatten it, drill the hole for the shackle; I put a small plate on the outside of mine. __________________ Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.