Manual to hydraulic clutch questions

[hunter1123]

Does anyone know if there is a year of Chevrolet pickup with a hydraulic clutch master cylinder that will fit correctly with the 1970 k10 manual clutch linkage?

Thank you

[clay68c10]

Some square body trucks had hydro clutch setups, maybe mid to late 80s.
You might ask over on the 73-87 side

[hunter1123]

Okay thank you!
Posted via Mobile Device

[57taskforce]

I used captainfab’s setup. It works great. 85+ square body have them But it will take some engineering to get the master to work with the pedal. You can see captainfab’s stuff in my build thread in the link in my signature. Start at post#135 and continue into page 7 for more pictures. You can buy his master cylinder kit from the parts board and I used an 80s aluminum hydraulic clutch bellhousing and slave. The clutch, pressure and throw out are for a 72K20. The line is metric to 3/16 inverted flare to JIC braided flex hose.

[hunter1123]

Originally Posted by 57taskforce

I used captainfab’s setup. It works great. 85+ square body have them But it will take some engineering to get the master to work with the pedal. You can see captainfab’s stuff in my build thread in the link in my signature. Start at post#135 and continue into page 7 for more pictures. You can buy his master cylinder kit from the parts board and I used an 80s aluminum hydraulic clutch bellhousing and slave. The clutch, pressure and throw out are for a 72K20. The line is metric to 3/16 inverted flare to JIC braided flex hose.

Posted via Mobile Device

[hunter1123]

Okay cool thanks for the help!
Posted via Mobile Device