Need help factory buckets in cab PIC's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

super72bb · 08-06-2004, 06:46 PM

Hi all,

My cab originally came with a bench seat, I have a set of original buckets to install in it. I was hoping to get a good clear picture of the underside of a cab that had factory bucket seats. The reason is... I want to see how the seat doublers in the floor looked from the factory. I would like to get an Idea of how they look before my bodyman makes a set. Any help on this would be great.

Thanks again
Curt

*Gee_Emm* · 08-06-2004, 06:49 PM

This is from my Jimmy but might be the same.

**D.PASSMORE** · 08-07-2004, 11:19 AM

Cabs that came with the bucket seat option on the sticker has a bracket that is mounted on the underside of the cab. There is a few smaller pieces that are tacked into spots where the seats bolt down. These are the factory brackets that were used for these type seats. I believe there is a aftermarket kit that is available to set the cab up for the switch from bench to buckets. The 67-68 bucket seat frame should bolt right into the bench seat mounting holes. Good Luck.

super72bb · 08-07-2004, 11:33 AM

Would anyone know where I could get such a kit?

**D.PASSMORE** · 08-09-2004, 07:38 AM

Try BROTHERS or the other part vendors that are listed on the home page of this board.

08-06-2004, 06:46 PM	#1
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Need help factory buckets in cab PIC's Hi all, My cab originally came with a bench seat, I have a set of original buckets to install in it. I was hoping to get a good clear picture of the underside of a cab that had factory bucket seats. The reason is... I want to see how the seat doublers in the floor looked from the factory. I would like to get an Idea of how they look before my bodyman makes a set. Any help on this would be great. Thanks again Curt __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

08-07-2004, 11:19 AM	#3
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	69-72 Bucket seats Cabs that came with the bucket seat option on the sticker has a bracket that is mounted on the underside of the cab. There is a few smaller pieces that are tacked into spots where the seats bolt down. These are the factory brackets that were used for these type seats. I believe there is a aftermarket kit that is available to set the cab up for the switch from bench to buckets. The 67-68 bucket seat frame should bolt right into the bench seat mounting holes. Good Luck. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

08-07-2004, 11:33 AM	#4
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Would anyone know where I could get such a kit? __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

08-09-2004, 07:38 AM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Kit Try BROTHERS or the other part vendors that are listed on the home page of this board.

08-06-2004, 06:49 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	This is from my Jimmy but might be the same.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.