Just do it! LS2/4l70E swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

short-t · 01-07-2009, 06:30 PM

Hello, I've been lurking here for a while now looking and reading. You have all been a very bad influence on me.

Here's the deal, my wife's 1968 short C10 is about to get dropped 3.5/5 and a engine & trans from a 07 Trail Blazer SS.

The drop kit I am using is form ECE (recommended by all most members) as well as converting the front to disk brakes also from ECE. The engine I just bought so I'll be waiting for it arrive. I also lucked out and found a CTS V oil pan on eBay last night, its new and included the pickup and baffle for 130 shipped!

Just a few pictures of the project,

cagodinez · 01-07-2009, 08:03 PM

nice truck! how much did you pay for that ls2/4l70 is you don't mind me asking. Im looking at a lq9/4l60e for $1900 with 7,000 miles

short-t · 01-07-2009, 08:59 PM

Quote:

Originally Posted by cagodinez

nice truck! how much did you pay for that ls2/4l70 is you don't mind me asking. Im looking at a lq9/4l60e for $1900 with 7,000 miles

Thanks! Is it complete? If so then I'd say you stole it. The ls2/4l70e I just bought has 16000mi and is complete right down to the electronic pedal control, I gave 4950 for it. WOW I got ripped off!

LuckyHenriksen · 01-07-2009, 09:38 PM

Cool truck man! I am planning a similar swap, but with a carb intake and maximum performance on a budget in mind =]

m6z · 01-07-2009, 10:16 PM

Quote:

Originally Posted by short-t

Thanks! Is it complete? If so then I'd say you stole it. The ls2/4l70e I just bought has 16000mi and is complete right down to the electronic pedal control, I gave 4950 for it. WOW I got ripped off!

That seems to be the going price for a complete ls2 & trans. I've been looking for a motor for my project also.

Good luck with the build

Gray Ghost · 01-07-2009, 11:43 PM

Beautiful truck!! I like the motor too....can't wait for the build thread!

**Hart_Rod** · 01-08-2009, 12:22 AM

Nice looking motor! I used ECE motor/tranny mounts and their EFI fuel tank. The CTsV pan works great with the ECE parts. Take a look at my suburban build thread. It's got a 5.3/4L60E. Can't wait to see the install pictures.

short-t · 01-08-2009, 11:16 AM

Quote:

Originally Posted by LuckyHenriksen

Cool truck man! I am planning a similar swap, but with a carb intake and maximum performance on a budget in mind =]

Thanks, I just finished checking out your build thread, you have done a lot of nice work to that 68, keep it up.

short-t · 01-08-2009, 11:39 AM

Quote:

Originally Posted by Hart_Rod

Nice looking motor! I used ECE motor/tranny mounts and their EFI fuel tank. The CTsV pan works great with the ECE parts. Take a look at my suburban build thread. It's got a 5.3/4L60E. Can't wait to see the install pictures.

Thanks, I've looked at your build thread a few times already, very nice indeed! I have to take my hat off to you for doing two huge projects at once. I just finished my 70 Z28/RS, a complete nut and bolt restoration that took me 4 years to finish. I wont be going to that extent with the truck right now. I just want to get it lowered, install the ls2 and drive it.

Ya I know the ece engine mounts work good with the CTsV pan, I got all of that info from your thread! Thanks eh. I am thinking about using Doug's headers too. Did you ever find out what dip stick works? I was hoping to use the CTsV dipstick. Greg

SeTx67 · 07-14-2013, 09:33 AM

Did this ever happen? If so I may have some questions if you don't mind
Posted via Mobile Device

bbadfred · 07-14-2013, 09:50 AM

Quote:

Originally Posted by cagodinez

nice truck! how much did you pay for that ls2/4l70 is you don't mind me asking. Im looking at a lq9/4l60e for $1900 with 7,000 miles

Sounds pretty cheap to me!!!!

short-t · 07-14-2013, 10:45 PM

Quote:

Originally Posted by SeTx67

Did this ever happen? If so I may have some questions if you don't mind
Posted via Mobile Device

Yup, finished it this spring. Almost 1000 miles and no issues!

SeTx67 · 07-14-2013, 10:52 PM

Wanna trade me trucks and do another? Lol. Your truck is very clean
Posted via Mobile Device

STOCKISH · 07-15-2013, 08:08 AM

SWEET! Truck is beautiful. Great work.

dan42 · 07-15-2013, 10:51 AM

Beautiful truck. You left a tank in the cab, or are you actually using that tank?
Posted via Mobile Device

BB72CHEVKT · 07-15-2013, 11:49 AM

That turned out nice!

short-t · 07-15-2013, 01:52 PM

Thanks guy's

Fuel tank is under the bed(fuel cell guy), made a bracket to keep the original filler cap in place. Didn't want any body work to do... This will come later, maybe.

SeTx67 · 07-15-2013, 02:04 PM

Did you have fitment issues with the tbss engine cover or just didn't like the way it looked?
Posted via Mobile Device

jmccully · 07-15-2013, 02:20 PM

looks awesome man!
what are those headers made for? f-body?

short-t · 07-17-2013, 12:56 AM

Quote:

Originally Posted by jmccully

looks awesome man!
what are those headers made for? f-body?

Dougthorly headers, made for 67-72 C10 with LS engine..
Posted via Mobile Device

short-t · 07-17-2013, 01:00 AM

Quote:

Originally Posted by SeTx67

Did you have fitment issues with the tbss engine cover or just didn't like the way it looked?
Posted via Mobile Device

My cover was cracked and had these givin to me from a very nice guy over at LS1 Tech.
Posted via Mobile Device

jmccully · 07-17-2013, 02:28 PM

Quote:

Originally Posted by short-t

Dougthorly headers, made for 67-72 C10 with LS engine..
Posted via Mobile Device

cool, you go with the 1 7/8 primaries?

short-t · 07-17-2013, 02:30 PM

Quote:

Originally Posted by jmccully

cool, you go with the 1 7/8 primaries?

1 5/8, the 1 7/8 where not out yet.

Greg

jmccully · 07-17-2013, 04:23 PM

Did you have any issues with fitment?

short-t · 07-17-2013, 04:28 PM

Quote:

Originally Posted by jmccully

Did you have any issues with fitment?

No fitment issues using ECE LS swap engine mounts.

01-07-2009, 06:30 PM	#1
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Just do it! LS2/4l70E swap Hello, I've been lurking here for a while now looking and reading. You have all been a very bad influence on me. Here's the deal, my wife's 1968 short C10 is about to get dropped 3.5/5 and a engine & trans from a 07 Trail Blazer SS. The drop kit I am using is form ECE (recommended by all most members) as well as converting the front to disk brakes also from ECE. The engine I just bought so I'll be waiting for it arrive. I also lucked out and found a CTS V oil pan on eBay last night, its new and included the pickup and baffle for 130 shipped! Just a few pictures of the project, Last edited by short-t; 01-07-2009 at 06:47 PM. Reason: Could not get pictures to post

01-07-2009, 08:03 PM	#2
cagodinez Registered User Join Date: Aug 2005 Location: Southern California Posts: 241	Re: Just do it! LS2/4l70E swap nice truck! how much did you pay for that ls2/4l70 is you don't mind me asking. Im looking at a lq9/4l60e for $1900 with 7,000 miles

01-07-2009, 09:38 PM	#4
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Just do it! LS2/4l70E swap Cool truck man! I am planning a similar swap, but with a carb intake and maximum performance on a budget in mind =] __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-07-2009, 11:43 PM	#6
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Just do it! LS2/4l70E swap Beautiful truck!! I like the motor too....can't wait for the build thread! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

01-08-2009, 12:22 AM	#7
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Just do it! LS2/4l70E swap Nice looking motor! I used ECE motor/tranny mounts and their EFI fuel tank. The CTsV pan works great with the ECE parts. Take a look at my suburban build thread. It's got a 5.3/4L60E. Can't wait to see the install pictures. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-08-2009 at 12:26 AM.

07-14-2013, 09:33 AM	#10
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Just do it! LS2/4l70E swap Did this ever happen? If so I may have some questions if you don't mind Posted via Mobile Device

07-14-2013, 10:52 PM	#13
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Just do it! LS2/4l70E swap Wanna trade me trucks and do another? Lol. Your truck is very clean Posted via Mobile Device

07-15-2013, 08:08 AM	#14
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Just do it! LS2/4l70E swap SWEET! Truck is beautiful. Great work. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-15-2013, 10:51 AM	#15
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Just do it! LS2/4l70E swap Beautiful truck. You left a tank in the cab, or are you actually using that tank? Posted via Mobile Device __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

07-15-2013, 11:49 AM	#16
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Just do it! LS2/4l70E swap That turned out nice! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

07-15-2013, 01:52 PM	#17
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: Just do it! LS2/4l70E swap Thanks guy's Fuel tank is under the bed(fuel cell guy), made a bracket to keep the original filler cap in place. Didn't want any body work to do... This will come later, maybe. __________________ 1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc

07-15-2013, 02:04 PM	#18
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Just do it! LS2/4l70E swap Did you have fitment issues with the tbss engine cover or just didn't like the way it looked? Posted via Mobile Device

07-15-2013, 02:20 PM	#19
jmccully Registered User Join Date: Sep 2012 Location: louisville,ms Posts: 36	Re: Just do it! LS2/4l70E swap looks awesome man! what are those headers made for? f-body?

07-17-2013, 04:23 PM	#24
jmccully Registered User Join Date: Sep 2012 Location: louisville,ms Posts: 36	Re: Just do it! LS2/4l70E swap Did you have any issues with fitment?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.