|
|
|
04-19-2004, 08:17 PM
|
#1 |
|
'71k204x4454
Join Date: Jan 2004
Location: Hood River Or.
Posts: 137
|
Easy remove tailgate
This has probably been on here but I just figured it out. The right side hing on a '73 to '81 (I belive those or the years to use) will bolt right up. So then all you would have to do is trim the metal a little on the bottom of your tailgate on the right side and your gate will pull right off at a 45' angle.
__________________
1971 K20 4x4 1964 buick skylark convertible |
|
|
|
04-19-2004, 10:36 PM
|
#2 |
|
Registered User
Join Date: Dec 2003
Location: Encinitas,CA
Posts: 316
|
let's see some pics and a how too on this! i'd be interested in doing this!
__________________
no longer have a ride, but still a fan! |
|
|
|
|
04-19-2004, 10:46 PM
|
#3 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
its not hard to do, i did it on mine. i used a hinge from a 78, but they are the same from 73-87. the hinges are not the same height, so i had to put in the top bolt only, and tighten it really tight. then i took an air cut off wheel, cut 2 slits from outside to very bottem of the trunion hole, then cut across, keep trying the gate on the truck, grinding out metal as needed, untill it slips on easy.
i also did this when i put a 76 ford tailgate on an 85 ford
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
|
04-19-2004, 11:44 PM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
How often do you remove your gate?
Personally, i prefer the set up where tools are needed and it is not a quick release...I knew some kids in high school that would grab tail gates off newer trucks and sell them...pure profit. |
|
|
|
|
04-20-2004, 10:07 AM
|
#5 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Then theres the trick of putting a hose clamp over the hinge so at least the thief has to carry a screwdriver with him to steal your gate.
|
|
|
|
|
04-21-2004, 12:55 AM
|
#6 |
|
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,369
|
I did this too. Mine is done using the stock 72 trunion with slight modification...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
|
|
|
|
04-21-2004, 12:56 AM
|
#7 |
|
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,369
|
Tailgate modification...
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
