Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-05-2024, 09:56 PM | #1 |
Senior Member
Join Date: Mar 2006
Location: Clarkrange Tennessee
Posts: 1,787
|
installing lights for under dash gauges
Hey guys In installed after market under dash auto meter gauges (oil pressure and water temp) The gauges have lights and I would like to hook them up to my headlight switch on my 67 C10 as I don't want to hook them up to a toggle switch? any help would be great thanks Rick
|
06-05-2024, 11:02 PM | #2 |
Msgt USAF Ret
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,715
|
Re: installing lights for under dash gauges
Find the PNL LTSW fuse on the fuse panel and splice into the gray wire that comes off it. There should be an input green wire to the fuse That comes off the headlight switch rheostat for dimming of the lights. It is not fused so the gray wire is the one you need. You might consider upgrading the fuse to a 4 or 5 amp. There are other ways to do this, but I think this is the easiest.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
06-06-2024, 10:08 AM | #3 |
Senior Member
Join Date: Mar 2006
Location: Clarkrange Tennessee
Posts: 1,787
|
Re: installing lights for under dash gauges
thank you
|
Bookmarks |
|
|