Clyde's '65 BBW "Bonnie" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bumwine · 02-17-2016, 10:36 AM

Ok so I had started a build thread for this truck but some things have changed and wanted to start over on my personal account. So here we go again

I picked up this '65 a little over a month ago. She started out her life as a Doran Chevrolet service truck. She's got a 283 that's seems fairly strong. I will run it for now until I get to that stage. Eventually she will be bagged with the works but for now. Its going to be static drop with big brakes, rims, new wiring, etc

bumwine · 02-17-2016, 10:38 AM

I have already done some spray paint removal

bumwine · 02-17-2016, 10:41 AM

Also knocked down some surface rust and got a nice patina look. I plan on painting her down the road but for now this will have to do

I also have a full time "helper" it will be his truck one day

bumwine · 02-17-2016, 10:56 AM

replaced the ball joints and got the hotchkis springs installed it's a 4/6 drop with 2" cpp drop spindles. Also rebuilt the rearend a bit and installed the new axles. Started on the brakes too

bumwine · 02-17-2016, 10:59 AM

I have the rims but I'm still have to get tires but not sure what route I want to go yet. Went with 17x8 in the front and 17x9 in the rear

62stepside longbox · 02-17-2016, 12:17 PM

Nice truck! Digging the patina

scoot_mcgrute · 02-17-2016, 01:07 PM

What did you use to get rid of the spray paint?

I've got a patch of black spray paint on my rear fender that I would like to see gone.

bumwine · 02-17-2016, 01:13 PM

Quote:

Originally Posted by 62stepside longbox

Nice truck! Digging the patina

Thanks!

bumwine · 02-17-2016, 01:14 PM

Quote:

Originally Posted by scoot_mcgrute

What did you use to get rid of the spray paint?

I've got a patch of black spray paint on my rear fender that I would like to see gone.

Green scotch brite and CLR. Took a decent amount of scrubbing but came off

scoot_mcgrute · 02-17-2016, 01:28 PM

Quote:

Originally Posted by bumwine

Green scotch brite and CLR. Took a decent amount of scrubbing but came off

Awesome, I was already planning on doing that to the truck. Thanks!

**TJ's Chevy** · 02-17-2016, 01:44 PM

Looks good!

bumwine · 02-17-2016, 10:38 PM

Started on running the new ebrake lines but needed to do some research on the final steps so I moved on to replacing my harness. Now I'm debating on restoring my cluster

bumwine · 02-28-2016, 02:09 PM

Haven't had too much time to work on the truck but with a hour here and there I've managed to get some more electrical done. Removed the power booster someone converted the truck to. they kinda hacked up the firewall a bit. I'll have to fix that down the road when it gets body worked and painted.

bumwine · 03-11-2016, 01:09 AM

Not much to update with lately. Been too busy to work on the truck. Managed to start playing with the new master though

**TJ's Chevy** · 03-11-2016, 05:34 PM

Bomp · 03-13-2016, 11:40 AM

Do you have the part number for that new master?
Like what I'm seeing.
Both feet on board, Sub'd

bumwine · 03-13-2016, 11:44 AM

Quote:

Originally Posted by Bomp

Do you have the part number for that new master?
Like what I'm seeing.
Both feet on board, Sub'd

I got it from the guys at az pro performance. Great guys and excellent customer service

http://www.azproperformance.com/Wilw...261-13269.html

ChrisDollins · 03-15-2016, 11:34 PM

Love the truck man. The chrome cragars look right at home.

Chris

bumwine · 03-16-2016, 12:59 AM

Quote:

Originally Posted by ChrisDollins

Love the truck man. The chrome cragars look right at home.

Chris

Thanks! Now if I could get some rubber on them and set her back on the ground

bumwine · 03-18-2016, 12:00 AM

I came across a intake and carb for cheap so I decided the engine could use a make over

Paul Y · 03-18-2016, 03:25 AM

Very nice Sir.

P.

**MisterC** · 03-19-2016, 01:09 AM

I'm loving the direction that you're heading on this. Well played!

Bomp · 03-19-2016, 09:35 AM

Level Up
Steps in the right direction. Diggin' it

bumwine · 03-19-2016, 09:46 AM

Thanks everyone! The shock relocation brackets showed up yesterday.

bumwine · 03-20-2016, 06:37 PM

Knocked out the front shock relocation today. Man these Cpp brackets are a pain with the cab on

02-17-2016, 10:36 AM	#1
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Clyde's '65 BBW "Bonnie" Ok so I had started a build thread for this truck but some things have changed and wanted to start over on my personal account. So here we go again I picked up this '65 a little over a month ago. She started out her life as a Doran Chevrolet service truck. She's got a 283 that's seems fairly strong. I will run it for now until I get to that stage. Eventually she will be bagged with the works but for now. Its going to be static drop with big brakes, rims, new wiring, etc

02-17-2016, 10:38 AM	#2
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I have already done some spray paint removal

02-17-2016, 10:41 AM	#3
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Also knocked down some surface rust and got a nice patina look. I plan on painting her down the road but for now this will have to do I also have a full time "helper" it will be his truck one day

02-17-2016, 10:56 AM	#4
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" replaced the ball joints and got the hotchkis springs installed it's a 4/6 drop with 2" cpp drop spindles. Also rebuilt the rearend a bit and installed the new axles. Started on the brakes too

02-17-2016, 10:59 AM	#5
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I have the rims but I'm still have to get tires but not sure what route I want to go yet. Went with 17x8 in the front and 17x9 in the rear

02-17-2016, 12:17 PM	#6
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: Clyde's '65 BBW "Bonnie" Nice truck! Digging the patina __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

02-17-2016, 01:07 PM	#7
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: Clyde's '65 BBW "Bonnie" What did you use to get rid of the spray paint? I've got a patch of black spray paint on my rear fender that I would like to see gone. __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-17-2016, 01:44 PM	#11
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Clyde's '65 BBW "Bonnie" Looks good! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

02-17-2016, 10:38 PM	#12
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Started on running the new ebrake lines but needed to do some research on the final steps so I moved on to replacing my harness. Now I'm debating on restoring my cluster

02-28-2016, 02:09 PM	#13
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Haven't had too much time to work on the truck but with a hour here and there I've managed to get some more electrical done. Removed the power booster someone converted the truck to. they kinda hacked up the firewall a bit. I'll have to fix that down the road when it gets body worked and painted.

03-11-2016, 01:09 AM	#14
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Not much to update with lately. Been too busy to work on the truck. Managed to start playing with the new master though

03-11-2016, 05:34 PM	#15
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Clyde's '65 BBW "Bonnie" __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

03-13-2016, 11:40 AM	#16
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Clyde's '65 BBW "Bonnie" Do you have the part number for that new master? Like what I'm seeing. Both feet on board, Sub'd

03-15-2016, 11:34 PM	#18
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: Clyde's '65 BBW "Bonnie" Love the truck man. The chrome cragars look right at home. Chris __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

03-18-2016, 12:00 AM	#20
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I came across a intake and carb for cheap so I decided the engine could use a make over



Register or Log In To remove these advertisements.

03-18-2016, 03:25 AM	#21
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 936	Re: Clyde's '65 BBW "Bonnie" Very nice Sir. P.

03-19-2016, 01:09 AM	#22
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Clyde's '65 BBW "Bonnie" I'm loving the direction that you're heading on this. Well played! __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

03-19-2016, 09:35 AM	#23
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Clyde's '65 BBW "Bonnie" Level Up Steps in the right direction. Diggin' it

03-19-2016, 09:46 AM	#24
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Thanks everyone! The shock relocation brackets showed up yesterday.

03-20-2016, 06:37 PM	#25
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Knocked out the front shock relocation today. Man these Cpp brackets are a pain with the cab on

Register or Log In To remove these advertisements.