WTB: 4 junk rods/pistons - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 09-23-2004, 05:10 AM

i need a set of 4 rods and pistons. they do not have to be useable in an engine, but i would prefer that they don't have extensive damage. rust and wear is fine. can be any size small block or big block. just need 4 preferable witht eh rods still pressed on.

not looking to pay alot because i'm not looking for parts that can be used in an engine, they are for something else. so if anyone has some junk ones sitting in the garage let me know how much you want for them. thanks

Russell · 09-23-2004, 05:27 AM

Hey Man!

I've got a couple grimy and rusty 350 pistons with rods still attached sitting in my scrap metal pile, you can have them for 10 US + shipping

Staceydude · 09-23-2004, 11:54 AM

Try hitting one of the pick and pulls and tell them what you are looking for, some of them will have junk stuff laying all over the place for real cheap.

Regards,

Stace

bigblock73 · 09-23-2004, 12:53 PM

Working on the coffee table bud?

I wish I could help, but i don't have what you are looking for.

CHEVYJEFF · 09-23-2004, 04:24 PM

Let me know next time your in town I have a set and i know where two other sets are. stock smallblock rods.

TooMany2count · 09-23-2004, 06:04 PM

must be making a Piston Throw game for car shows????...joe

low 84 · 09-23-2004, 07:27 PM

yep i'm building a coffe table from an ls1 block i got from another member awhile back.

russle, i think shipping from canada to texas might be expensive, i don't know though?

jeff, i was just up in dallas last week, i should have posted this last week i guess, lol. i won't be back up there for awhile but i can send you some money for shipping plus some for your trouble if you dont' mind shipping them. let me know

thanks guys

CHEVYJEFF · 09-23-2004, 10:52 PM

Let me dig around for some clean ones. you need 4 correct. with or without pistons? If you really want to get fancy I have a set of 8 childs and albert aluminum rods you can have for 150.

Russell · 09-23-2004, 11:50 PM

Shipping would probally be around 20 bucks cnd or so, not bad at all, just takes 2 - 4 weeks to get there...

Best would probally be local though, but mine are available if you want em

low 84 · 09-24-2004, 12:21 AM

jeff i need 4 rod with pistons. dosen't matter if they are clean or not. i will just sand them and paint them. they are just going to be supports for glass on a coffee table. the childs and alberts would be badass but i'm building this thing on a pretty small budget, lol

*1972C10* · 09-24-2004, 02:22 AM

I know i have some old SJ rods and pistons but they are seized I may have some other ones ill check .

*1FaastC10* · 09-24-2004, 02:41 AM

mine will probably end up being a Pontiac engine, since i have an extra laying around...

low 84 · 09-26-2004, 12:08 AM

ttt

09-23-2004, 05:10 AM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	WTB: 4 junk rods/pistons i need a set of 4 rods and pistons. they do not have to be useable in an engine, but i would prefer that they don't have extensive damage. rust and wear is fine. can be any size small block or big block. just need 4 preferable witht eh rods still pressed on. not looking to pay alot because i'm not looking for parts that can be used in an engine, they are for something else. so if anyone has some junk ones sitting in the garage let me know how much you want for them. thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

09-23-2004, 05:27 AM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hey Man! I've got a couple grimy and rusty 350 pistons with rods still attached sitting in my scrap metal pile, you can have them for 10 US + shipping __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-23-2004, 12:53 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Working on the coffee table bud? I wish I could help, but i don't have what you are looking for. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

09-23-2004, 04:24 PM	#5
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	Let me know next time your in town I have a set and i know where two other sets are. stock smallblock rods. __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

09-23-2004, 06:04 PM	#6
TooMany2count Who's in CHARGE?????????? Join Date: Nov 2002 Location: Cahokia, IL Posts: 454	must be making a Piston Throw game for car shows????...joe __________________ Send a card to a soldier in Iraq My Music PlayList Large Marge Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE

09-23-2004, 11:54 AM	#3
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Try hitting one of the pick and pulls and tell them what you are looking for, some of them will have junk stuff laying all over the place for real cheap. Regards, Stace

09-23-2004, 07:27 PM	#7
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	yep i'm building a coffe table from an ls1 block i got from another member awhile back. russle, i think shipping from canada to texas might be expensive, i don't know though? jeff, i was just up in dallas last week, i should have posted this last week i guess, lol. i won't be back up there for awhile but i can send you some money for shipping plus some for your trouble if you dont' mind shipping them. let me know thanks guys __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

09-23-2004, 10:52 PM	#8
CHEVYJEFF Registered User Join Date: Oct 2002 Location: WYLIE TEXAS Posts: 232	Let me dig around for some clean ones. you need 4 correct. with or without pistons? If you really want to get fancy I have a set of 8 childs and albert aluminum rods you can have for 150. __________________ http://members.cardomain.com/chevyjeff 57 2 DOOR HDTP 82 CORVETTE 90 V10 BLAZER 97 REGAL LSR 2100 (BOAT)

09-23-2004, 11:50 PM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Shipping would probally be around 20 bucks cnd or so, not bad at all, just takes 2 - 4 weeks to get there... Best would probally be local though, but mine are available if you want em __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-24-2004, 12:21 AM	#10
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	jeff i need 4 rod with pistons. dosen't matter if they are clean or not. i will just sand them and paint them. they are just going to be supports for glass on a coffee table. the childs and alberts would be badass but i'm building this thing on a pretty small budget, lol __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

09-24-2004, 02:22 AM	#11
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I know i have some old SJ rods and pistons but they are seized I may have some other ones ill check .

09-24-2004, 02:41 AM	#12
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	mine will probably end up being a Pontiac engine, since i have an extra laying around...

09-26-2004, 12:08 AM	#13
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	ttt __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.