The date is set LonghornMan is coming to the NW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 09-13-2007, 12:35 AM

Ok all NW people Andy is coming on Sept, 29th. He is going to pick up the ochre burb and the parts burb here in Monroe. I would like as many NW members to come out for a BBQ, and a little work party to make the burb a little more road worthy. There are some rubber fuel lines and heater hoses to replace. I think he is going to change the tranny fluid and filter. Also he is going to convert to HEI before he hits the road. This is a rain or shine deal. I have plenty of room to park our trucks, and plenty of room to get out of the rain (if it decides to rain that is).

I can provide hamburgers, hot dogs and soda (Sorry, I would prefer no alcohol, its my in laws place where this will be happening and I don't want any incidences). I don't have a portable BBQ though, any volunteers for that? Let me know here or by pm if you want to come out and if you want to help with any of the eats or do a little wrenching.

When we have planned these little get togethers in the past there is lots of interest, but in the end very few people end up coming. There are a ton of NW people on this board and personally I think we could easily have more people show up than were at the big meet earlier in the year. Umm, sorry no camping its a one day deal

Its one Saturday in September...summers over, it should be easy to clear your plate for one day of truck fun.

I think Andy will post his route also so people can be ready in case he has any problems. A lot of you guys have already gave him your info. This should be an interesting journey.

Mark

CG · 09-13-2007, 09:23 AM

If we can get enough people its been brought to my attention we can print up some road trip t-shirts.

Keep the suggestions coming. This may end up being an event we can do once a year. Someone back east wants to buy one our NW rigs and flys out and drives back.

Wonder what we can sell Liz or Josh?

Longhorn Man · 09-13-2007, 10:40 AM

For those not knowing whats goin on... view this thread;
http://67-72chevytrucks.com/vboard/s...d.php?t=254669
And a sneak peak at whats on that thread;

is it the 29th yet?

Spray-Bomb · 09-13-2007, 10:57 AM

When are you gonna post up your route ???

Longhorn Man · 09-13-2007, 11:13 AM

I'll probably sit down and figure it all out this evening.

weasel29gm · 09-13-2007, 11:28 AM

Glad that ole' Andy is gonna get it!!!

Bob Moore · 09-13-2007, 11:36 AM

CG - I am familiar on how to get to Monroe but --- I need a street address. Please post it here or PM me.

Thanks - Bob

Longhorn Man · 09-13-2007, 11:40 AM

lol... yeah, I need it too!

toms68cst · 09-13-2007, 01:43 PM

That's a heII of a trip.

http://www.mapquest.com/directions/m...&2s=OH&2z=&r=f

You should take I-94 through the upper midwest states!

**Classic Heartbeat** · 09-13-2007, 02:07 PM

I will have to check my callender. I think that Andy was planning a trip down to my place too?? I could bring my grill that we use for our annual truck show. Maybe a couple of Classic Heartbeat "T" shirts..lol WES

67ChevyRedneck · 09-13-2007, 04:43 PM

The real question is, is Andy going to drive that pristine western body in the Ohio winters? Be a hell of a shame

Best of luck when you go!

Edit: Looked at the map. WOW is that going to be one hell of a trip!

Johnnyreb · 09-13-2007, 04:58 PM

good luck on your trip bro

johnnyreb

Ackattack · 09-13-2007, 05:11 PM

I don't have any plans for the 29th yet, so I'll try to keep it open.

bad6772 · 09-13-2007, 06:01 PM

good luck longhorn man...looks like a fun trip... if you need any help road side repair... in the indiana area let me know and ill get you my number......

mtdave2 · 09-13-2007, 07:38 PM

sweet burb bro. wish i could make it! id love to hang out with you guys. alas, im stuck in texas.

**70cst** · 09-13-2007, 08:13 PM

Hey Andy...
If you stop at Classic Heartbeat...Don't forget to get my Hot Dog sandwiches that WESS owes me from a couple years back. I have been fasting for the last couple of years waiting for my sandwiches. You have the support of thousands, maybe hundred of thousands of followers.

ryanroo · 09-13-2007, 08:41 PM

well iffin you follow that route posted, you will be coming directly through my neck of the woods. can pm ya a # if ya want.
oh yeah, you suck, i want a burb
J/K good luck, glad to see the expanding of the heerd
Ryan

Longhorn Man · 09-13-2007, 09:00 PM

I'm not gonna say the burb will never see snow, however, I DO plan on havin it parked in the sloppy months. Plus, I am so anal on the definition of clean, it'll get cleaned REAL GOOD any time salty air even gets close to it.
You can ask fine69.. he's seen my tools at work, EVERYTHING keeps clean.
Wes, yeah, i am plannin on swingin by there... been considering a set of 67-70 style front and rear bumpers... if the funds show up in time that is. There's a pretty stong chance of it happening too from the looks of things. With no shipping, what kinda numbers we lookin at? That's like 260 for the 2 of them right? (haven't honestly priced them in a long time) Oh yeah Wes... I was told to pick up a hot dog?

If you have it, I'll just eat it and tell that cat that he missed out.

70CST... you got it bro, I'll try to get the hot dog!

Bad6772, and ryanroo... If you guys would like to PM me your contact info... I'm takin down all the numbers I can... for the 'just in case' factor. I'll be havin notes for every state I pass though, and names and numbers will be in my notes.
Dave... I already PM'd you a nastygram on this.... COME AROUND MORE OFTEN MAN!

Tom68CST, that looks like the route I was considering. I need to open the Atlas and take a good look at it before I comit to it and say that's the actual plan.

**oldiron** · 09-13-2007, 09:06 PM

CG I will be over to help. PM me a map how to get to your place.

msgross · 09-13-2007, 09:20 PM

2500 miles!

That will be an adventure...

lyrikz · 09-13-2007, 09:42 PM

CG, i live in monroe washington on frylands blvd. Just picked up a 71 stepside. You dont happen to have a welder do you? HAHAH.....

Glad to see a fellow members close. Kidding about the welder, but wouldnt mind coming to the bbq.

CG · 09-13-2007, 09:45 PM

Ill post directions or a map this weekend. To be honest I was hoping for a better response from the NW crowd. (Yeah I realize its only been a day, heh) A few here and some pm's. Cmon folks this is more of a get together than anything else. Working on the burb isn't a requirement...lol. We need people to eat and bs with too.

Welcome to the board lyrikz...there are a few members that live in the Monroe and the outlying areas. Hope you make it to the BBQ.

Longhorn Man · 09-13-2007, 09:46 PM

Quote:

Working on the burb isn't a requirement...lol. We need people to eat and bs with too.

It isn't a requirement???
I was hopin to sit in a director's chair and flirt with someone's wife!

(I'm just kidding... I don't need the chair!)

chevydog66 · 09-13-2007, 09:53 PM

I wouldn't take 94 thru Chicago. I hate driving thru Chicago, unless it's 3am. Duck down thru Indy. I'm 1.5 hours north of Indy, but he** you're almost home then. Good luck!! Have fun!!

Longhorn Man · 09-13-2007, 10:17 PM

I've done Chicago once... it wasn't too bad (down town, rush hr, on a friday morning) but i don't particularly wanna do it in an old truck with another old truck strapped to the bumper.
The route I am about to look at doesn't include that though.

09-13-2007, 12:35 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	The date is set LonghornMan is coming to the NW Ok all NW people Andy is coming on Sept, 29th. He is going to pick up the ochre burb and the parts burb here in Monroe. I would like as many NW members to come out for a BBQ, and a little work party to make the burb a little more road worthy. There are some rubber fuel lines and heater hoses to replace. I think he is going to change the tranny fluid and filter. Also he is going to convert to HEI before he hits the road. This is a rain or shine deal. I have plenty of room to park our trucks, and plenty of room to get out of the rain (if it decides to rain that is). I can provide hamburgers, hot dogs and soda (Sorry, I would prefer no alcohol, its my in laws place where this will be happening and I don't want any incidences). I don't have a portable BBQ though, any volunteers for that? Let me know here or by pm if you want to come out and if you want to help with any of the eats or do a little wrenching. When we have planned these little get togethers in the past there is lots of interest, but in the end very few people end up coming. There are a ton of NW people on this board and personally I think we could easily have more people show up than were at the big meet earlier in the year. Umm, sorry no camping its a one day deal Its one Saturday in September...summers over, it should be easy to clear your plate for one day of truck fun. I think Andy will post his route also so people can be ready in case he has any problems. A lot of you guys have already gave him your info. This should be an interesting journey. Mark Last edited by CG; 09-13-2007 at 12:36 AM.

09-13-2007, 09:23 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: The date is set LonghornMan is coming to the NW If we can get enough people its been brought to my attention we can print up some road trip t-shirts. Keep the suggestions coming. This may end up being an event we can do once a year. Someone back east wants to buy one our NW rigs and flys out and drives back. Wonder what we can sell Liz or Josh? Last edited by CG; 09-13-2007 at 09:25 AM.

09-13-2007, 10:40 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: The date is set LonghornMan is coming to the NW For those not knowing whats goin on... view this thread; http://67-72chevytrucks.com/vboard/s...d.php?t=254669 And a sneak peak at whats on that thread; is it the 29th yet? Last edited by Longhorn Man; 09-13-2007 at 01:23 PM.

09-13-2007, 10:57 AM	#4
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: The date is set LonghornMan is coming to the NW When are you gonna post up your route ??? __________________ Just not low enough... ----------------------------- Sinister Killer

09-13-2007, 11:13 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: The date is set LonghornMan is coming to the NW I'll probably sit down and figure it all out this evening. Last edited by Longhorn Man; 09-13-2007 at 11:13 AM.

09-13-2007, 11:28 AM	#6
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,097	Re: The date is set LonghornMan is coming to the NW Glad that ole' Andy is gonna get it!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

09-13-2007, 11:36 AM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: The date is set LonghornMan is coming to the NW CG - I am familiar on how to get to Monroe but --- I need a street address. Please post it here or PM me. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow Last edited by Bob Moore; 09-13-2007 at 11:38 AM.

09-13-2007, 11:40 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: The date is set LonghornMan is coming to the NW lol... yeah, I need it too!

09-13-2007, 01:43 PM	#9
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,297	Re: The date is set LonghornMan is coming to the NW That's a heII of a trip. http://www.mapquest.com/directions/m...&2s=OH&2z=&r=f You should take I-94 through the upper midwest states! __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club. Last edited by toms68cst; 09-13-2007 at 01:45 PM.

09-13-2007, 02:07 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: The date is set LonghornMan is coming to the NW I will have to check my callender. I think that Andy was planning a trip down to my place too?? I could bring my grill that we use for our annual truck show. Maybe a couple of Classic Heartbeat "T" shirts..lol WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-13-2007, 04:43 PM	#11
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: The date is set LonghornMan is coming to the NW The real question is, is Andy going to drive that pristine western body in the Ohio winters? Be a hell of a shame Best of luck when you go! Edit: Looked at the map. WOW is that going to be one hell of a trip! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-13-2007 at 04:47 PM.

09-13-2007, 04:58 PM	#12
Johnnyreb Registered User Join Date: Aug 2007 Location: Shreveport, La Posts: 67	Re: The date is set LonghornMan is coming to the NW good luck on your trip bro johnnyreb __________________ Heavy Chevy

09-13-2007, 05:11 PM	#13
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: The date is set LonghornMan is coming to the NW I don't have any plans for the 29th yet, so I'll try to keep it open. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

09-13-2007, 06:01 PM	#14
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: The date is set LonghornMan is coming to the NW good luck longhorn man...looks like a fun trip... if you need any help road side repair... in the indiana area let me know and ill get you my number...... Last edited by bad6772; 09-13-2007 at 06:04 PM.

09-13-2007, 07:38 PM	#15
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Re: The date is set LonghornMan is coming to the NW sweet burb bro. wish i could make it! id love to hang out with you guys. alas, im stuck in texas. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban



Register or Log In To remove these advertisements.

09-13-2007, 08:13 PM	#16
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: The date is set LonghornMan is coming to the NW Hey Andy... If you stop at Classic Heartbeat...Don't forget to get my Hot Dog sandwiches that WESS owes me from a couple years back. I have been fasting for the last couple of years waiting for my sandwiches. You have the support of thousands, maybe hundred of thousands of followers. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 09-13-2007 at 08:14 PM.

09-13-2007, 08:41 PM	#17
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: The date is set LonghornMan is coming to the NW well iffin you follow that route posted, you will be coming directly through my neck of the woods. can pm ya a # if ya want. oh yeah, you suck, i want a burb J/K good luck, glad to see the expanding of the heerd Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

09-13-2007, 09:00 PM	#18
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: The date is set LonghornMan is coming to the NW I'm not gonna say the burb will never see snow, however, I DO plan on havin it parked in the sloppy months. Plus, I am so anal on the definition of clean, it'll get cleaned REAL GOOD any time salty air even gets close to it. You can ask fine69.. he's seen my tools at work, EVERYTHING keeps clean. Wes, yeah, i am plannin on swingin by there... been considering a set of 67-70 style front and rear bumpers... if the funds show up in time that is. There's a pretty stong chance of it happening too from the looks of things. With no shipping, what kinda numbers we lookin at? That's like 260 for the 2 of them right? (haven't honestly priced them in a long time) Oh yeah Wes... I was told to pick up a hot dog? If you have it, I'll just eat it and tell that cat that he missed out. 70CST... you got it bro, I'll try to get the hot dog! Bad6772, and ryanroo... If you guys would like to PM me your contact info... I'm takin down all the numbers I can... for the 'just in case' factor. I'll be havin notes for every state I pass though, and names and numbers will be in my notes. Dave... I already PM'd you a nastygram on this.... COME AROUND MORE OFTEN MAN! Tom68CST, that looks like the route I was considering. I need to open the Atlas and take a good look at it before I comit to it and say that's the actual plan. Last edited by Longhorn Man; 09-13-2007 at 10:16 PM.

09-13-2007, 09:06 PM	#19
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,094	Re: The date is set LonghornMan is coming to the NW CG I will be over to help. PM me a map how to get to your place. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

09-13-2007, 09:20 PM	#20
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: The date is set LonghornMan is coming to the NW 2500 miles! That will be an adventure... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-13-2007, 09:42 PM	#21
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	Re: The date is set LonghornMan is coming to the NW CG, i live in monroe washington on frylands blvd. Just picked up a 71 stepside. You dont happen to have a welder do you? HAHAH..... Glad to see a fellow members close. Kidding about the welder, but wouldnt mind coming to the bbq.

09-13-2007, 09:45 PM	#22
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: The date is set LonghornMan is coming to the NW Ill post directions or a map this weekend. To be honest I was hoping for a better response from the NW crowd. (Yeah I realize its only been a day, heh) A few here and some pm's. Cmon folks this is more of a get together than anything else. Working on the burb isn't a requirement...lol. We need people to eat and bs with too. Welcome to the board lyrikz...there are a few members that live in the Monroe and the outlying areas. Hope you make it to the BBQ. Last edited by CG; 09-13-2007 at 09:47 PM.

09-13-2007, 09:53 PM	#24
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: The date is set LonghornMan is coming to the NW I wouldn't take 94 thru Chicago. I hate driving thru Chicago, unless it's 3am. Duck down thru Indy. I'm 1.5 hours north of Indy, but he** you're almost home then. Good luck!! Have fun!! __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

09-13-2007, 10:17 PM	#25
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: The date is set LonghornMan is coming to the NW I've done Chicago once... it wasn't too bad (down town, rush hr, on a friday morning) but i don't particularly wanna do it in an old truck with another old truck strapped to the bumper. The route I am about to look at doesn't include that though. Last edited by Longhorn Man; 09-13-2007 at 10:18 PM.

Register or Log In To remove these advertisements.