![]() |
Register or Log In To remove these advertisements. |
|
|
View Poll Results: Quadrajet or demon | |||
Quadrajet |
![]() ![]() ![]() ![]() |
25 | 71.43% |
Demon |
![]() ![]() ![]() ![]() |
10 | 28.57% |
Voters: 35. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2007
Location: reno
Posts: 397
|
Quadrajet or Demon
I have been debating this for a while now, but need some help choosing. I have a cammed out 402 in my '70. I have had good luck with both, but really liked my old demon. I have been thinking about the quadrajet for the gas mileage, but would I gain enough mileage to be worth it? Thanks
__________________
A sweet 2000 Deville..... |
![]() |
![]() |
![]() |
#2 |
is Certifiable
Join Date: Feb 2008
Location: Hinesville, Georgia
Posts: 160
|
Re: Quadrajet or Demon
I love Q-jet carbs. A bit complicated if you have never worked on one. But with a good book, and a little patience. I don't think there is a better street carb.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2007
Location: Grundy Virginia
Posts: 385
|
Re: Quadrajet or Demon
QJET....plain and simple
__________________
"OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2004
Location: Topeka, Ks
Posts: 2,293
|
Re: Quadrajet or Demon
Got to agree, quadrajet is at the top of my list.
__________________
I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. |
![]() |
![]() |
![]() |
#5 |
That's right, it's Copper!!
Join Date: May 2007
Location: Bakersfield, Central California
Posts: 558
|
Re: Quadrajet or Demon
I love Demon carbs, I have three of them. When I started on my truck and was doing my homework on all the parts I needed and wanted I never even thought about the carb, it was going to be a Demon.
I've thought about it this way. Every Q-jet is used and is at least 20 years old and the carburetor I buy from Berry Grant is brand new with a warranty and tech support. A Q-jet won't be any better on mileage than the proper Demon carb correctly tuned. The Demon carb will also out perform the Q-jet in a performance application. |
![]() |
![]() |
![]() |
#6 |
knuckle buster..
![]() Join Date: Oct 2007
Location: Frisco
Posts: 613
|
Re: Quadrajet or Demon
![]() ![]() ![]() i have a few demon carbs on different things and they are the best! demon carbs are an evolved holley carb with all the upgrades done, and all the problems eliminated. as for q'jets being the best "street" carb? hmmmmm????? i think its a matter of preference and opinion when you go to a voters pole, but if specs and performance numbers mean anything to ya, go with the demon! well lets see both ![]() barry grant demon series carbs= tuning=easy...........................+1pt floats w/sight glass & adj/outside..+10pt rebuilding=easy+cost friendly...+1pt price=reasonable ..................+1pt parts=everywhere.................+1pt + ______________________________ = 14 points for the demon quadrajet factory stock carbs= tuning=pita...................-1pt floats=??pita................-10pt rebuilding=pita..............-1pt price=reasonable...........+1pt parts=good luck............-1pt + ___________________________ = -12 points for the q-jet ![]()
__________________
_______________________________________________________________________________ Eric THIS SITE ROCKS!!! ![]() Check out my suburban on 20's with fresh paint! Click here to support the site Check out the Member Photo Gallery here StreetCruizin FAQ thread Site vendors list (scroll down to vendors in red) ![]() ![]() |
![]() |
![]() |
![]() |
#7 |
User #12137
![]() Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
Re: Quadrajet or Demon
q jet
if it is rebuilt the proper way it will out perform the demon i use to have a web page(lost it when puter died a few years ago) where they took the same motor and used a qjet and a holly and a demon and sumthing else and the qjet outpreformed them all and made more hp seams to me they even had a write up bout this in hotrod mag a while back Last edited by tnblazerk5; 03-11-2008 at 09:44 AM. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2003
Location: Mtn. Home, Idaho
Posts: 906
|
Re: Quadrajet or Demon
Q-jets may be old but in the "right hands" you cant get a more dependable reliable carb than a good ol jet. Cant argue with results so to each his own but the 500's got a SMI Q-jet! wanna race?
|
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: Quadrajet or Demon
I just got my 402BB rebuilt and I am going back the the original QJet. QJet is the best...why settle for less.
![]()
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 03-11-2008 at 05:36 PM. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2006
Location: southern Il
Posts: 335
|
Re: Quadrajet or Demon
quadrajet factory stock carbs=
tuning=pita...................-1pt floats=??pita................-10pt rebuilding=pita..............-1pt price=reasonable...........+1pt parts=good luck............-1pt + ___________________________ = -12 points for the q-jet ![]() ok I have never had a demon so I will not down them at all but tunning a Q is so simple floats may be a bit harder if the demon can be adjusted from the outside rebuild- I was doing Qs in my teens price- kills the demon +100 points parts- all over the place +100 points |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2008
Location: austin texas
Posts: 202
|
Re: Quadrajet or Demon
Demon. If one of you Qjet lovers want to trade a new road demon for a busted old Qjet we can work something out.
__________________
Mike 68 C10 LWB midnight blue metallic 307ci, 700R4, HEI front discs, leaf spring rear tilt steering wheel, stock ride height, rally wheels, 2007 Dodge Charger(Hemi) |
![]() |
![]() |
![]() |
#12 |
Junior Member
Join Date: Apr 2006
Location: Eufaula, OK
Posts: 103
|
Re: Quadrajet or Demon
Qjet
__________________
Clif '68 C/10 LWB, 327, TH400, 12 bolt |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Quadrajet or Demon
|
![]() |
![]() |
![]() |
#14 | |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Quadrajet or Demon
Quote:
If it's for the street, you won't notice the HP difference. I've seen several dyno comparrisons where the qjet makes more power/torque down low, and stays right with the aftermarket carbs on the top end. |
|
![]() |
![]() |
![]() |
#15 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,513
|
Re: Quadrajet or Demon
-
Read this thread.... http://67-72chevytrucks.com/vboard/s...ighlight=demon I sent mine in and had BG work on it and it still runs rich. No more for me..... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Feb 2006
Location: Smyrna, Ga
Posts: 1,647
|
Re: Quadrajet or Demon
i have had extremely bad experience with deomn carbs. i bought one thinking it was going to solve all my aspiration problems, after all i had taken the advise of all the experts and experienced mechanics from this site. i got nothing but problems when i bought that thing. demon is a good name for them.
i sent it in and the technical support at demon could not figure out what was wrong with the carb. they spec'd it out for my motor and all. the choke never worked right, hence it would never idle on its own and when it did idle it was too high. you couldn't get the idle adjustment screws to do anything. when i frantically called the tech support guys they wanted me to drill out air bleeds and idle feed restrictors and bend linkages becasue they werent right from the factory. when i took it apart i found alot of shavings in the fuel bowls and in other fuel passages. actually not one hole in the entire body had been deburred. i pissed me off so bad i sold it to the recyling place for scrap. there are alot of satisfied customers out there that like them, so there has to be some good coming from them. |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Quadrajet or Demon
Quote:
![]() ![]() |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Apr 2007
Location: Norman, OK
Posts: 222
|
Re: Quadrajet or Demon
Mine is not the most qualified opinion here, as I have only had one Quadrajet and one pre-Demon (Barry Grant Silver Claw). Here's my experience:
Had a Quadrajet on my truck's engine when I bought it several years ago. I swapped the intake manifold for a square-bore version, which forced me into an Edlebrock 750. I eventually changed to a 600 Eddy, which helped out on the low end of the RPM range. Just a few months after the intake change, I rebuilt the whole engine, including a set of new heads, bigger cam, etc. So there, I don't have any kind of "apples-to-apples" comparison.... My Chevelle has the 820CFM Barry Grant carb on it. Lots of power once it warms up (no choke). The floats are very easy to adjust. Like some mentioned already, changing jets, drilling air bleeds, etc sucks compared to the Eddy/Quadrajet. One thing that confuses me about the issue of complexity of the Quadrajet is how so many folks seem to hate the Quadrajet, but switch to an Eddy and love it. Based on what I have seen, the Eddy and Quadrajet are the same basic design, requiring rods/jets to be changed, then certain linkage rods to be bent to tune the carb. About the only things that I see as different are the choke pull-off and the A/C idle compensator being included. Almost all other control linkages/tuning methods seem to be the same between the two. Yes, there are definite differences, but not very many from a tuning standpoint. From a street driveability and gas mileage point of view, I don't see how you can beat a well-tuned Quadrajet. Check out www.cliffshighperformance.com (formerly Cliffs Q Jet) Just my two cents... HomerJ
__________________
67 C-10 LWB "Cow-butt-spotted" (neighbor's term) - work in progress. 350/TH400/3.73 67 Chevelle SS Clone ![]() |
![]() |
![]() |
![]() |
#19 |
Account Suspended
Join Date: Sep 2005
Location: Monroe, WA
Posts: 3,815
|
Re: Quadrajet or Demon
Hoooo boy. Here we go again. I'm going to make one set of posts and bolt
![]() ANY properly sized, properly configured, properly working and properly tuned street carb will be within a few percentage points on driveability, power and fuel economy. The reason many prefer the Q-jet is it has a much wider tolerance "out of the box", but a properly tuned Edelbrock or Holley will equal or surpass it on all counts. The Q-jet is an excellent street carb for stock to mildly modified engines if you have no plans to make ongoing tuning changes. It is not an easy carb to tune (nearly 3 decades of experience) and there is not a broad range of aftermarket parts support. For engines making over about 1HP/CID, it is not a great choice in my experience. The Edelbrock Performer and Holley Street Avengers are highly tuneable carbs, but will almost certainly require tuning to get them right on. Add that $250 dyno tune to the price of the carb...but the payback will be a carb that is perfectly adapted to the engine. They are highly tuneable with outstanding aftermarket support. BG had some huge quality issues out of the gate, but the last two Street Demons I've bought have been fine. I have come to prefer the Edelbrock Performer for a street carb. VERY easy to tune, and outstanding driveability, economy and power. |
![]() |
![]() |
![]() |
#20 | |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Quadrajet or Demon
Quote:
|
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: May 2005
Location: PA
Posts: 2,696
|
Re: Quadrajet or Demon
Here's a super chevy article worth checking out. They put the qjet vs 750 demon and 750 Holley. Of course engine dyno #'s aren't the world, and this is only a magazine article.... but it's interesting to note the outcome.
Edit: http://www.superchevy.com/technical/...ild/index.html Hopefully the link will work this time. Last edited by Jim_PA; 03-11-2008 at 10:54 PM. |
![]() |
![]() |
![]() |
#22 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Quadrajet or Demon
I really like the Q-jet and stand by them.But,it depends on the motor.If I do a motor where a square bore air gap intake is part of the plan,then it`s a Demon.Size depends on how the motor is built.Any mis-matched carb will lose it`s benefit and perform poorly than expected...just like anything else on a motor.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Mar 2007
Location: Grundy Virginia
Posts: 385
|
Re: Quadrajet or Demon
fastest thing i ever rode (without NOS) had a new road demon taken off and back on went a reman'd qjet........
__________________
"OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno |
![]() |
![]() |
![]() |
#24 |
Registered User
![]() Join Date: Jan 2006
Location: ARIZONA
Posts: 85
|
Re: Quadrajet or Demon
q-jet from jet carburators.come in 3 stages of performance.
|
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jan 2006
Location: Kaufman, Tx
Posts: 827
|
Re: Quadrajet or Demon
My opinion, if it matters;
If you want to bolt it on, and never touch it again, put on a Q-jet, or Edlebrock. If you want to wring every last horse, and every inch of torque, out of it, then put a BG or Holley on it. If you go for speed and torque, get ready to do some tuning. No-one makes a carb properly tuned for any motor. If you get one, you got lucky. Like said above, what makes the Q-jets and Edle's so popular is the fact they have a much wider range of applications for a given carb. Beyond that, it's a ford, chevy, dodge debate. You'll get ten answers from ten people. I run a Holley street avenger. After a few tuning things were out of the way, it has been trouble free for 2yrs now. Jay
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|