Fully Custom Trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thirdstreettito · 04-05-2011, 07:36 PM

Post those fully custom trucks.

I'll start

classic truck \| Flickr - Photo Sharing!

bcutt · 04-05-2011, 07:50 PM

Here are a few I had saved on my computer.

gixxerpymp · 04-05-2011, 08:00 PM

I like this thread.

1stchevy · 04-05-2011, 08:08 PM

^x2
Posted via Mobile Device

**70cst** · 04-05-2011, 08:42 PM

A lot of work went into these trucks and a lot of talent was neeed to get the desired results...but...I still prefer a lightly moded truck. Must be my old age.

bosco200 · 04-05-2011, 08:44 PM

Quote:

Originally Posted by 70cst

A lot of work went into these trucks and a lot of talent was neeed to get the desired results...but...I still prefer a lightly moded truck. Must be my old age.

I cant agree more....but im only 17

58 gmc · 04-05-2011, 08:45 PM

heres a couple

Slick67 · 04-05-2011, 10:39 PM

Name: SAM_0398.jpg
Views: 3191
Size: 58.4 KB

DALTON · 04-05-2011, 11:19 PM

Great Thread!!

Spoof · 04-05-2011, 11:23 PM

I'd love to grab on of these rigs, cruise back to 1970 to Oshawa or Detroit and just watch the look on the workers faces filing out at the end of their shift.
Especially if it has a Ramjet 502, ECM hooked up to your laptop. While my hot girl with implants chats on her i-phone and your air susp. bumps up and down.
"I've seen the future and it's SICK"...(confused looks) "that means groovey in the future" smiles all around.

**mac808** · 04-05-2011, 11:35 PM

Quote:

Originally Posted by Spoof

I'd love to grab on of these rigs, cruise back to 1970 to Oshawa or Detroit and just watch the look on the workers faces filing out at the end of their shift.
Especially if it has a Ramjet 502, ECM hooked up to your laptop. While my hot girl with implants chats on her i-phone and your air susp. bumps up and down.
"I've seen the future and it's SICK"...(confused looks) "that means groovey in the future" smiles all around.

Too funny!

All you need to do is figure out how to get that flux capacitor into your truck, find some plutonium and somehow manage to generate the 1.21 gigawatts of power and you're there!

bcutt · 04-06-2011, 08:28 AM

A few more I had.

**special-K** · 04-06-2011, 09:46 AM

Quote:

Originally Posted by Spoof

I'd love to grab on of these rigs, cruise back to 1970 to Oshawa or Detroit and just watch the look on the workers faces filing out at the end of their shift.
... While my hot girl with implants chats on her i-phone and your air susp. bumps up and down...

...and her boobs don't

I dunno. I kinda doubt they'd like it. I'm from back then and most guys I know from back then like 'em how they were made. Mild custom is cool cuz it shows respect for what you started with...a damn nice vehicle. They used to chop and hack '55s and Vettes,etc. Time has proven that was a mistake and we look back and call it goofy. Live and let live. But,that's my take...from experience.

Not trying to stop the show. Keep 'em coming...

John Gilbert · 04-06-2011, 11:04 AM

It looks like this is open to all years, so here's a shot of my '88. I just took these this morning. Maybe later today I'll wash the poor thing.

It's for sale, $8,900 obo. I will take an interesting trade. Maybe something kind of stock, so I can cut it in half and weld it back together again.

Speaking of boobs, somewhere I've got an old issue of Tailgate with this truck smothered with nubile young female bi-peds sporting altered appendages that are attempting to bounce... Sometimes I miss that job.

**Tmend** · 04-06-2011, 04:49 PM

big_al_71 · 04-06-2011, 06:13 PM

my kind of thread....

bucketObolts · 04-06-2011, 08:01 PM

Quote:

Originally Posted by 70cst

A lot of work went into these trucks and a lot of talent was neeed to get the desired results...but...I still prefer a lightly moded truck. Must be my old age.

No I dont think it's just an age thing. I'm 23 and I'm currently building my 3rd bagged and bodydropped truck and have done it all including shaving off pinchwelds and sectioning bodies all to get that extra 1/2 inch or so but I'm more and more leaning towards my next truck or next rendition of my 68 being just a clean mild custom with a static drop. Then again, I have said I was done with bags before...

eightbanger · 04-06-2011, 08:02 PM

Quote:

...and her boobs don't

**ms2335** · 04-07-2011, 09:39 AM

Quote:

Originally Posted by gixxerpymp

I like this thread.

x3

eightbanger · 04-07-2011, 01:19 PM

Project Second Chance...There is a lot I like about this Truck.

HARJO · 04-07-2011, 06:46 PM

Quote:

Originally Posted by eightbanger

Project Second Chance...There is a lot I like about this Truck.

Dang!!! That's very similar to the theme that I have laid out for my bucket of rust.

Is that a board members truck?

FRENCHBLUE72 · 04-07-2011, 10:05 PM

Yes it is a board mebers truck.... Theres a build thred here somewhere for it....

FRENCHBLUE72 · 04-07-2011, 10:09 PM

Heres a few rides...

colin_havens · 04-18-2011, 04:26 PM

Can I throw mine into the mix?

bucketObolts · 04-18-2011, 07:05 PM

Colin Havens

I love the way you're 2 tone split follows the body lines. Im really having a hard time deciding wether or not to ditch my rollpans and go back to bumpers. They're definitely growing on me, especially with that pic

04-05-2011, 07:50 PM	#2
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: Fully Custom Trucks Here are a few I had saved on my computer. Attached Images __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

04-05-2011, 08:00 PM	#3
gixxerpymp Registered User Join Date: Sep 2007 Location: Brandon FL Posts: 258	Re: Fully Custom Trucks I like this thread.

04-05-2011, 08:08 PM	#4
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Fully Custom Trucks ^x2 Posted via Mobile Device

04-05-2011, 08:42 PM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Fully Custom Trucks A lot of work went into these trucks and a lot of talent was neeed to get the desired results...but...I still prefer a lightly moded truck. Must be my old age. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-05-2011, 08:45 PM	#7
58 gmc ToTM Winner Join Date: Jun 2006 Location: okc Posts: 243	Re: Fully Custom Trucks heres a couple Attached Images __________________ ToTM Winner

04-05-2011, 10:39 PM	#8
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Fully Custom Trucks __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

04-05-2011, 11:19 PM	#9
DALTON 69 C-10 Short Fleet Join Date: Jul 2007 Location: Roanoke Va & North Myrtle Beach SC Posts: 50	Re: Fully Custom Trucks Great Thread!! __________________ Tony Dalton

04-05-2011, 11:23 PM	#10
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	Re: Fully Custom Trucks I'd love to grab on of these rigs, cruise back to 1970 to Oshawa or Detroit and just watch the look on the workers faces filing out at the end of their shift. Especially if it has a Ramjet 502, ECM hooked up to your laptop. While my hot girl with implants chats on her i-phone and your air susp. bumps up and down. "I've seen the future and it's SICK"...(confused looks) "that means groovey in the future" smiles all around. __________________ 71 GMC 1500 LWB Last edited by Spoof; 04-05-2011 at 11:23 PM.

04-06-2011, 08:28 AM	#12
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: Fully Custom Trucks A few more I had. Attached Images __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

04-06-2011, 11:04 AM	#14
John Gilbert Registered User Join Date: Sep 2009 Location: Placentia, California Posts: 567	Re: Fully Custom Trucks It looks like this is open to all years, so here's a shot of my '88. I just took these this morning. Maybe later today I'll wash the poor thing. It's for sale, $8,900 obo. I will take an interesting trade. Maybe something kind of stock, so I can cut it in half and weld it back together again. Speaking of boobs, somewhere I've got an old issue of Tailgate with this truck smothered with nubile young female bi-peds sporting altered appendages that are attempting to bounce... Sometimes I miss that job. Attached Images

04-06-2011, 04:49 PM	#15
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,307	Re: Fully Custom Trucks

04-06-2011, 06:13 PM	#16
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Fully Custom Trucks my kind of thread.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-07-2011, 01:19 PM	#20
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Fully Custom Trucks Project Second Chance...There is a lot I like about this Truck. Attached Images __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger Last edited by eightbanger; 04-07-2011 at 01:20 PM.

04-07-2011, 10:05 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Fully Custom Trucks Yes it is a board mebers truck.... Theres a build thred here somewhere for it.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-07-2011, 10:09 PM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Fully Custom Trucks Heres a few rides... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

04-18-2011, 04:26 PM	#24
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: Fully Custom Trucks Can I throw mine into the mix?

04-18-2011, 07:05 PM	#25
bucketObolts Registered User Join Date: Mar 2011 Location: Pequannock NJ Posts: 259	Re: Fully Custom Trucks Colin Havens I love the way you're 2 tone split follows the body lines. Im really having a hard time deciding wether or not to ditch my rollpans and go back to bumpers. They're definitely growing on me, especially with that pic

Register or Log In To remove these advertisements.