Engine bay cleanup - Throttle/kickdown bracket Q's? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Number98 · 12-14-2011, 08:50 AM

I just dropped in a new 1406 Performer and was curious what kind of brackets you guys are using for your throttle cable/ return spring/ kickdown brackets?

Looking for a neat clean looking install...

I posted a question about this a little while back in the engine section but didn't get any responses so I figured maybe I would get a little more by posting here

chevykevy · 12-14-2011, 09:15 AM

I used a stock bracket mounted to the rear manifold bolts.

screamin_c10 · 12-14-2011, 09:49 AM

http://67-72chevytrucks.com/vboard/s...ight=edelbrock

The throttle and TV cable bracket is BTO due to my 700r4

hayhauler71 · 12-14-2011, 10:34 PM

Made mine out of aluminum that bolts to the rear studs of the carb will take some pics this weekend and post them up.

hayhauler71 · 01-08-2012, 09:42 PM

Quote:

Originally Posted by hayhauler71

Made mine out of aluminum that bolts to the rear studs of the carb will take some pics this weekend and post them up.

here they are sorry it took so long

dukcaln · 01-09-2012, 12:08 AM

you will love the 1406, just installed mine too with a alum intake...used some parts from the q-jet throttle and a LITTLE FAB..... same kick down set up... works great.. i will post a better pic tomorrow

12-14-2011, 08:50 AM	#1
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Engine bay cleanup - Throttle/kickdown bracket Q's? I just dropped in a new 1406 Performer and was curious what kind of brackets you guys are using for your throttle cable/ return spring/ kickdown brackets? Looking for a neat clean looking install... I posted a question about this a little while back in the engine section but didn't get any responses so I figured maybe I would get a little more by posting here

12-14-2011, 09:15 AM	#2
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: Engine bay cleanup - Throttle/kickdown bracket Q's? I used a stock bracket mounted to the rear manifold bolts. Attached Images

12-14-2011, 09:49 AM	#3
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Engine bay cleanup - Throttle/kickdown bracket Q's? http://67-72chevytrucks.com/vboard/s...ight=edelbrock The throttle and TV cable bracket is BTO due to my 700r4 __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 12-14-2011 at 09:55 AM.

12-14-2011, 10:34 PM	#4
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Engine bay cleanup - Throttle/kickdown bracket Q's? Made mine out of aluminum that bolts to the rear studs of the carb will take some pics this weekend and post them up. __________________ Fuzzy

01-09-2012, 12:08 AM	#6
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Engine bay cleanup - Throttle/kickdown bracket Q's? you will love the 1406, just installed mine too with a alum intake...used some parts from the q-jet throttle and a LITTLE FAB..... same kick down set up... works great.. i will post a better pic tomorrow __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.