What did you get done this week 9/30/2012 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 09-30-2012, 08:14 PM

took mine to the car wash this weekend and vacuumed it out.. nothing else truck related at all I have been spending alot of time getting ready to trade in the escape and researching the replacement vehicle you all?

77chevyinline6 · 09-30-2012, 08:39 PM

picked up a 350 to replace the inline 6 with, got the 350 cleaned up but still have a long ways to go

JRANGER · 09-30-2012, 08:43 PM

gave up on fixing the leaks of my outside wall of the workshop...Stripped all the caulk out and installed a drip edge under the water channel.....Bent it up on the inside so now it drips will spew out the front

Manland Customs · 10-01-2012, 12:52 AM

Bought a bed liner for the truck, attempted to sort some wiring out before sinking more beer to drown the brain cells in............

Chreees · 10-01-2012, 02:25 AM

Motor swap on my 76

zaccaglin · 10-01-2012, 03:53 AM

Made my marker lights flash with blinkers. Picked up parts and fluid for the the soon power steering pump replacement and racked up the miles to and from work.
Posted via Mobile Device

zaccaglin · 10-01-2012, 03:54 AM

Oh and poared in a good ole can of Seafoam.
Posted via Mobile Device
Posted via Mobile Device

D13 · 10-01-2012, 06:03 AM

Started my diesel, first time since June. let it run for half an hour to charge the batteries. Amusing part was when it blew the mouse nest out of the RH exhaust pipe - shredded hood insulator soaked in diesel fumes all ove the place. Put it in the barn, hopefully I'll get the rearend redone over winter.

88Jimmy4x4 · 10-01-2012, 07:15 AM

replaced cigarette lighter assembly in 76...not much of a task but well worth it.

SSC's76 · 10-01-2012, 08:59 AM

my white shifter knob broke friday heck its only 40 years old at least so had to rob the one from my wifes car and adapt it to fit mine. wife don't know but dident have a choice since she missed so much work the last few weeks. other then that not much except get my gas ration for the next 2 weeks. gotta say sure is nice to have a truck that isn't leaking oil again.

Posted from 67-72chevytrucks.com App for Android

motornut · 10-01-2012, 08:31 PM

got my rear speakers in,nice sound for "stock"

bmchevy1979 · 10-01-2012, 08:35 PM

Installed a all spring 2.5" Rancho lift kit I got at the wrecking yard a few weeks ago for $100 including all shocks, U-bolts, and a set of over-load springs. Also started doing body work in preparation for paint

TwinTurbo · 10-01-2012, 08:41 PM

Got a new compressor...a bigger one

Rich84 · 10-03-2012, 02:00 PM

I went to South Carolina for the weekend with the wife..Only thing truck related was me wondering how much tranny fluid was leaking out after sitting for 5 days.

09-30-2012, 08:14 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	What did you get done this week 9/30/2012 edition took mine to the car wash this weekend and vacuumed it out.. nothing else truck related at all I have been spending alot of time getting ready to trade in the escape and researching the replacement vehicle you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-30-2012, 08:39 PM	#2
77chevyinline6 Registered User Join Date: Dec 2011 Location: mount airy NC Posts: 308	Re: What did you get done this week 9/30/2012 edition picked up a 350 to replace the inline 6 with, got the 350 cleaned up but still have a long ways to go Attached Images __________________ 77 c10 (went from a inline 6 to 350) (converted to 3 speed in the floor) 350: mild cam, holley 600cfm 4bbl, summit stage 1 intake, accel billet distributer, flowtech headers, 2 1/4" exhaust with glasspacks, powermaster 160a alternator.

09-30-2012, 08:43 PM	#3
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: What did you get done this week 9/30/2012 edition gave up on fixing the leaks of my outside wall of the workshop...Stripped all the caulk out and installed a drip edge under the water channel.....Bent it up on the inside so now it drips will spew out the front __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

10-01-2012, 12:52 AM	#4
Manland Customs Registered User Join Date: Sep 2012 Location: Australia Posts: 16	Re: What did you get done this week 9/30/2012 edition Bought a bed liner for the truck, attempted to sort some wiring out before sinking more beer to drown the brain cells in............

10-01-2012, 02:25 AM	#5
Chreees Registered User Join Date: Dec 2011 Location: Antioch, California Posts: 27	Re: What did you get done this week 9/30/2012 edition Motor swap on my 76 __________________ 1976 k10 2003 reg cab 1500 Gig'em Aggies

10-01-2012, 03:53 AM	#6
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: What did you get done this week 9/30/2012 edition Made my marker lights flash with blinkers. Picked up parts and fluid for the the soon power steering pump replacement and racked up the miles to and from work. Posted via Mobile Device __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

10-01-2012, 03:54 AM	#7
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: What did you get done this week 9/30/2012 edition Oh and poared in a good ole can of Seafoam. Posted via Mobile Device Posted via Mobile Device __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

10-01-2012, 06:03 AM	#8
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done this week 9/30/2012 edition Started my diesel, first time since June. let it run for half an hour to charge the batteries. Amusing part was when it blew the mouse nest out of the RH exhaust pipe - shredded hood insulator soaked in diesel fumes all ove the place. Put it in the barn, hopefully I'll get the rearend redone over winter. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

10-01-2012, 07:15 AM	#9
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Re: What did you get done this week 9/30/2012 edition replaced cigarette lighter assembly in 76...not much of a task but well worth it. __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB

10-01-2012, 08:59 AM	#10
SSC's76 No No Join Date: Jun 2005 Location: Pueblo Colorado Posts: 1,781	my white shifter knob broke friday heck its only 40 years old at least so had to rob the one from my wifes car and adapt it to fit mine. wife don't know but dident have a choice since she missed so much work the last few weeks. other then that not much except get my gas ration for the next 2 weeks. gotta say sure is nice to have a truck that isn't leaking oil again. Posted from 67-72chevytrucks.com App for Android __________________ 1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler

10-01-2012, 08:31 PM	#11
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: What did you get done this week 9/30/2012 edition got my rear speakers in,nice sound for "stock" Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-01-2012, 08:35 PM	#12
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: What did you get done this week 9/30/2012 edition Installed a all spring 2.5" Rancho lift kit I got at the wrecking yard a few weeks ago for $100 including all shocks, U-bolts, and a set of over-load springs. Also started doing body work in preparation for paint __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195

10-01-2012, 08:41 PM	#13
TwinTurbo Registered User Join Date: Sep 2003 Location: The Netherlands Posts: 994	Re: What did you get done this week 9/30/2012 edition Got a new compressor...a bigger one

10-03-2012, 02:00 PM	#14
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,694	Re: What did you get done this week 9/30/2012 edition I went to South Carolina for the weekend with the wife..Only thing truck related was me wondering how much tranny fluid was leaking out after sitting for 5 days.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.