DBW Gas Pedal Adpater bracket for truck/suv pedal

[Hart_Rod]

Originally Posted by 1968C30

Do you have any brackets available? Thanks

Yes I do!

[1968C30]

Originally Posted by Hart_Rod

Yes I do!

Payment sent thanks!

[1968C30]

Originally Posted by Hart_Rod

Yes I do!

Bracket received today. Thanks

[Hart_Rod]

Originally Posted by 1968C30

Bracket received today. Thanks

YW!

[kev2809]

hey Rob I would like a bracket but my truck pedal is a 2002. not sure if the 03-07 is different?

[Hart_Rod]

Originally Posted by kev2809

hey Rob I would like a bracket but my truck pedal is a 2002. not sure if the 03-07 is different?

Should be the same

[EagleChief]

Looks like it has been a while since anyone has hit you on these. Still have some available?

[Hart_Rod]

Originally Posted by EagleChief

Looks like it has been a while since anyone has hit you on these. Still have some available?

Yes

[EagleChief]

Originally Posted by Hart_Rod

Yes

Good deal. Payment sent.

[Hart_Rod]

Originally Posted by EagleChief

Good deal. Payment sent.

Thanks! I need a shipping address.

R

[EagleChief]

Originally Posted by Hart_Rod

Thanks! I need a shipping address.

R

Sent you a PM.

[1968 GMC owner]

Ron, I will take one of your brackets. PM sent.

[Hart_Rod]

Originally Posted by 1968 GMC owner

Ron, I will take one of your brackets. PM sent.

Paypal is robhartley@aol.com. Thanks!

[coolvdub]

Hi Rob,
Looking at your bracket and wondering if the standard bracket works for 72 K20 with a 2005 Yukon donor for the DBW Pedal.

Thanks
Don

[Hart_Rod]

Originally Posted by coolvdub

Hi Rob,
Looking at your bracket and wondering if the standard bracket works for 72 K20 with a 2005 Yukon donor for the DBW Pedal.

Thanks
Don

Yes it will Don. Let me know.

Rob

[coolvdub]

Hi Rob,

Hoping you and any family are doing okay with the weather.
I will take a pedal adapter and just checking to see if they are still $100.
Let me know and I will paypal you and be patient due to the current situation.

Don

[Tmend]

Payment sent . Thanks much

[Hart_Rod]

Originally Posted by Tmend

Payment sent . Thanks much

Thanks. Will ship early next week.

[josephuta214]

Installed this over the weekend. Worked out great! Thanks again!

[hewittca]

I finally had a chance to get my pedal bracket installed and wanted to share an updated review for anyone looking to use this bracket. Overall, it is a very nice bracket, but it needed several modifications to work how I wanted it. First off, as with a few others with 72s in this thread, none of the holes really lined up. I had to enlarge the three mounting holes on the right quite a bit, and the two holes on the left were not over top of the ribs so I had to redrill those completely. As for pedal placement, it is fine but it sets the pedal far off the floor. For me, it was awkward to push. Technically, the bracket does allow you to get full throw on the pedal, but you don't need that much travel. The sensor reads 100% throttle at about 50% pedal throw. With this in mind, I added an angled plate to the bracket to move the pedal closer to the floor. This puts it in a much more comfortable position and still gives me WOT with the pedal pushed against the floor. I also welded in nuts on the back side so mounting the pedal would be easier, and swapped out the basic hardware that came with the bracket to something a little nicer. As it is now, I am very happy with the bracket, but it would have been nice if this is how it came out of the box (esp. for the price). That being said, every truck is different and this is on a highly modified truck, so it's not unreasonable to expect to have to make some adjustments.

[1981_c10]

Just sent paypal for bracket. Shipping address connected to paypal payment from Tiffany (my wife).

[Hart_Rod]

Originally Posted by hewittca

I finally had a chance to get my pedal bracket installed and wanted to share an updated review for anyone looking to use this bracket. Overall, it is a very nice bracket, but it needed several modifications to work how I wanted it. First off, as with a few others with 72s in this thread, none of the holes really lined up. I had to enlarge the three mounting holes on the right quite a bit, and the two holes on the left were not over top of the ribs so I had to redrill those completely. As for pedal placement, it is fine but it sets the pedal far off the floor. For me, it was awkward to push. Technically, the bracket does allow you to get full throw on the pedal, but you don't need that much travel. The sensor reads 100% throttle at about 50% pedal throw. With this in mind, I added an angled plate to the bracket to move the pedal closer to the floor. This puts it in a much more comfortable position and still gives me WOT with the pedal pushed against the floor. I also welded in nuts on the back side so mounting the pedal would be easier, and swapped out the basic hardware that came with the bracket to something a little nicer. As it is now, I am very happy with the bracket, but it would have been nice if this is how it came out of the box (esp. for the price). That being said, every truck is different and this is on a highly modified truck, so it's not unreasonable to expect to have to make some adjustments.

Thanks for review. I'm not sure what the issue was with the holes as it is drilled for the 67-70 and the 71-72 which is a different pattern. I set these up with consideration for the firewall insulation and having carpet installed.

Originally Posted by kev2809

that's strange mine lined up perfect on my 67. are the 72's that different?

71 and 72 have a different pattern as they have a cable for the carburetor vice a rod.

Originally Posted by 1981_c10

Just sent paypal for bracket. Shipping address connected to paypal payment from Tiffany (my wife).

Your bracket shipped this morning. Thanks for your purchase! Take care,

Rob

[1981_c10]

I think i bought the wrong one...i needed one for 73-87 c10...is it different?

[Hart_Rod]

Originally Posted by 1981_c10

I think i bought the wrong one...i needed one for 73-87 c10...is it different?

I don’t make one specifically for the 73-87, although some on here have used it on those years.

[1981_c10]

Originally Posted by Hart_Rod

I don’t make one specifically for the 73-87, although some on here have used it on those years.

Gotcha...i am i able to return for refund? for the price paid i would want something that works with no modification.