IN 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 01-15-2019, 09:29 PM

One Year Only 1960 Chevy Custom Cab Trim. I have both sail panels, rear cab trim and metal retainers (for upper sail panel corners). The trim has been straightened and is not 100% perfect but VERY nice. Sail panels are nice but need paint. Metal retainers are rusty but should be usable or use them as a pattern. Also have most of the screws- had to drill out a couple. It is hard to get good pictures of shiny items but here are several and if you want more then I can get more.

$1,000 picked up in Shelburn, IN or at a swap meet I am attending. I am still looking into a good way to ship trying not to get damaged.

I will be at Lima OH. Swap Meet Jan.27th and Nashville, TN swap meet Feb. 3rd. I will also be going to Clarksville, TN on Monday Jan. 25th. I am sure there will be more but only ones planned at this time.

**Todd68Chevy** · 01-15-2019, 09:31 PM

More Pictures

**Todd68Chevy** · 01-15-2019, 09:33 PM

Few More

**Todd68Chevy** · 01-15-2019, 09:35 PM

Let me know if you want more

**DPowers** · 01-15-2019, 10:34 PM

Nice pieces Todd.

**nsb29** · 01-16-2019, 09:06 AM

I just sold a set that I had shipped the long piece in a PVC tube the sales can be bubble wrap and shipped it in a Sturdy cardboard box Nice looking set

**Todd68Chevy** · 01-16-2019, 10:19 AM

Quote:

Originally Posted by DPowers

Nice pieces Todd.

Thanks

Quote:

Originally Posted by nsb29

I just sold a set that I had shipped the long piece in a PVC tube the sales can be bubble wrap and shipped it in a Sturdy cardboard box Nice looking set

What size pcv? To small of a diameter flexs. I am thinking 2" but not sure. Did you glue the caps on the end or tape them? Did it go through Post office or did it have to go ups? Thanks

**GMCNUT** · 01-16-2019, 03:31 PM

Quote:

Originally Posted by Todd68Chevy

Thanks

What size pcv? To small of a diameter flexs. I am thinking 2" but not sure. Did you glue the caps on the end or tape them? Did it go through Post office or did it have to go ups? Thanks

I've shipped a bunch of these in 2" PVC using Fedex and USPS - just tape the caps and it works fine.

**nsb29** · 01-16-2019, 04:30 PM

Actually it was inch and a half and I tape the ends on sent it USPS

**Todd68Chevy** · 01-16-2019, 04:47 PM

Quote:

Originally Posted by GMCNUT

I've shipped a bunch of these in 2" PVC using Fedex and USPS - just tape the caps and it works fine.

Quote:

Originally Posted by nsb29

Actually it was inch and a half and I tape the ends on sent it USPS

Thanks for the information.

**Todd68Chevy** · 02-10-2019, 09:46 PM

Still available.

jonzcustomshop · 02-10-2019, 10:34 PM

an idea: my dad used to ship chrome trim off 567 chevys all over the country , wood (and shipping) was cheaper then, but he always used a 2x4 so it wouldn't bend, and then a piece of styrafoam on top, all wrapped in cardboard...

for this, I would say a 2X4 and then inside a piece of pvc….something this rare and valuable who-ever buys it should not cut any corners w the shipping!

**nsb29** · 02-11-2019, 08:43 AM

Quote:

Originally Posted by jonzcustomshop

an idea: my dad used to ship chrome trim off 567 chevys all over the country , wood (and shipping) was cheaper then, but he always used a 2x4 so it wouldn't bend, and then a piece of styrafoam on top, all wrapped in cardboard...

for this, I would say a 2X4 and then inside a piece of pvc….something this rare and valuable who-ever buys it should not cut any corners w the shipping!

I will bet you could drive a truck over a piece a schedule 40 1 1/2PVC LOL yeah not really but PVC is a lot stronger then the shipping companies it has always worked very well

**Todd68Chevy** · 02-24-2019, 10:25 PM

Quote:

Originally Posted by jonzcustomshop

an idea: my dad used to ship chrome trim off 567 chevys all over the country , wood (and shipping) was cheaper then, but he always used a 2x4 so it wouldn't bend, and then a piece of styrafoam on top, all wrapped in cardboard...

for this, I would say a 2X4 and then inside a piece of pvc….something this rare and valuable who-ever buys it should not cut any corners w the shipping!

Quote:

Originally Posted by nsb29

I will bet you could drive a truck over a piece a schedule 40 1 1/2PVC LOL yeah not really but PVC is a lot stronger then the shipping companies it has always worked very well

Thanks but I am as worried about it getting lost as I am it getting damaged. I have had 2 packages in 2 weeks get lost. After a week they have showed up but never know. Thanks

**Todd68Chevy** · 03-25-2019, 06:47 PM

Ttt

**Todd68Chevy** · 06-01-2019, 08:31 AM

Still available.. I can bring the sail panels and trim to the Peotone IL swap meet next weekend if anybody is interested and wants to pick up there or along the way. Thanks

**Todd68Chevy** · 07-20-2019, 04:01 PM

Ttt

**Todd68Chevy** · 01-02-2020, 11:12 AM

Still available. I will be leaving for the Indy swap meet early Saturday if you want me to bring these.

I will also be at the Stone River Swap Meet February 2 if you want me to bring it there I need to know by Friday January 31 to bring it there. Thanks

**Todd68Chevy** · 07-05-2020, 07:08 AM

Still available.

01-15-2019, 09:29 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	1960 Chevy Custom Sail Panels With Cab Trim- Very Nice One Year Only 1960 Chevy Custom Cab Trim. I have both sail panels, rear cab trim and metal retainers (for upper sail panel corners). The trim has been straightened and is not 100% perfect but VERY nice. Sail panels are nice but need paint. Metal retainers are rusty but should be usable or use them as a pattern. Also have most of the screws- had to drill out a couple. It is hard to get good pictures of shiny items but here are several and if you want more then I can get more. $1,000 picked up in Shelburn, IN or at a swap meet I am attending. I am still looking into a good way to ship trying not to get damaged. I will be at Lima OH. Swap Meet Jan.27th and Nashville, TN swap meet Feb. 3rd. I will also be going to Clarksville, TN on Monday Jan. 25th. I am sure there will be more but only ones planned at this time. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2019, 09:31 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice More Pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2019, 09:33 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Few More Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2019, 09:35 PM	#4
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Let me know if you want more Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-15-2019, 10:34 PM	#5
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Nice pieces Todd. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-16-2019, 09:06 AM	#6
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice I just sold a set that I had shipped the long piece in a PVC tube the sales can be bubble wrap and shipped it in a Sturdy cardboard box Nice looking set

01-16-2019, 04:30 PM	#9
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Actually it was inch and a half and I tape the ends on sent it USPS

02-10-2019, 09:46 PM	#11
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Still available. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-10-2019, 10:34 PM	#12
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice an idea: my dad used to ship chrome trim off 567 chevys all over the country , wood (and shipping) was cheaper then, but he always used a 2x4 so it wouldn't bend, and then a piece of styrafoam on top, all wrapped in cardboard... for this, I would say a 2X4 and then inside a piece of pvc….something this rare and valuable who-ever buys it should not cut any corners w the shipping! __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

03-25-2019, 06:47 PM	#15
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

06-01-2019, 08:31 AM	#16
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Still available.. I can bring the sail panels and trim to the Peotone IL swap meet next weekend if anybody is interested and wants to pick up there or along the way. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-20-2019, 04:01 PM	#17
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

01-02-2020, 11:12 AM	#18
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Still available. I will be leaving for the Indy swap meet early Saturday if you want me to bring these. I will also be at the Stone River Swap Meet February 2 if you want me to bring it there I need to know by Friday January 31 to bring it there. Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-05-2020, 07:08 AM	#19
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1960 Chevy Custom Sail Panels With Cab Trim- Very Nice Still available. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.