MN wtb: Clutch ball stud for v-8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 05-16-2020, 09:11 AM

1972 jimmy with a 350. Looks like the ball stud that threads into the block is broken on my 72 jimmy. Anyone have an extra? Shipped to 55744. Thanks.

**Ironhorse** · 05-16-2020, 03:58 PM

Eric, not a lot of help but if your Jimmy is a 4x4 which is most likely I'm pretty sure you will need a specific ball stud for 4x4 application. I went thru this on my '71 4x4 LWB when mine snapped off at the block before I switched it over to an TH350. I found it takes a longer ball stud which goes into the block for a 4x4. It is GM # 6261872. I had a couple NOS spares and sold them after I changed to an auto. Do a search for 4x4 ball stud or that part number and it should bring up one of my sale ads showing what it looks like. Good luck in your search.

**too much stuff** · 05-16-2020, 06:36 PM

Gary, thanks for the info. It is indeed a 4x4.

**Jeff's bowtie's** · 05-16-2020, 10:06 PM

I think I have a nos one I can check in the morning interested thanks

**CUSTOM/10** · 05-17-2020, 10:55 AM

I have a used one that I removed from one of my trucks when I converted it to auto. It was a 4x4 truck.

Gary

**too much stuff** · 05-17-2020, 11:43 AM

Quote:

Originally Posted by Jeff's bowtie's

I think I have a nos one I can check in the morning interested thanks

Quote:

Originally Posted by CUSTOM/10

I have a used one that I removed from one of my trucks when I converted it to auto. It was a 4x4 truck.

Gary

Interested in these. Let me know totals to 55744.
Gary, yours is from a v-8?

**CUSTOM/10** · 05-17-2020, 04:00 PM

Sent you a PM.

Yes it's from a V-8.

**Jeff's bowtie's** · 05-17-2020, 04:58 PM

Sorry I can’t help the nos ball I have is for the frame side thanks

05-16-2020, 09:11 AM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	wtb: Clutch ball stud for v-8 1972 jimmy with a 350. Looks like the ball stud that threads into the block is broken on my 72 jimmy. Anyone have an extra? Shipped to 55744. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-16-2020, 03:58 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: wtb: Clutch ball stud for v-8 Eric, not a lot of help but if your Jimmy is a 4x4 which is most likely I'm pretty sure you will need a specific ball stud for 4x4 application. I went thru this on my '71 4x4 LWB when mine snapped off at the block before I switched it over to an TH350. I found it takes a longer ball stud which goes into the block for a 4x4. It is GM # 6261872. I had a couple NOS spares and sold them after I changed to an auto. Do a search for 4x4 ball stud or that part number and it should bring up one of my sale ads showing what it looks like. Good luck in your search. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-16-2020, 06:36 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: wtb: Clutch ball stud for v-8 Gary, thanks for the info. It is indeed a 4x4. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-16-2020, 10:06 PM	#4
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,957	Re: wtb: Clutch ball stud for v-8 I think I have a nos one I can check in the morning interested thanks

05-17-2020, 10:55 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: wtb: Clutch ball stud for v-8 I have a used one that I removed from one of my trucks when I converted it to auto. It was a 4x4 truck. Gary Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 05-17-2020 at 11:03 AM.

05-17-2020, 04:00 PM	#7
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,854	Re: wtb: Clutch ball stud for v-8 Sent you a PM. Yes it's from a V-8. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 05-17-2020 at 04:08 PM.

05-17-2020, 04:58 PM	#8
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,957	Re: wtb: Clutch ball stud for v-8 Sorry I can’t help the nos ball I have is for the frame side thanks Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.