The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Question for the ultra-low (https://67-72chevytrucks.com/vboard/showthread.php?t=212974)

XXL	11-15-2006 04:11 PM

Re: Question for the ultra-low

I just lopped off the loop on a perfectly good, brand new ECE notch. I'm adding 3" to the top of the loop, and will gusset it as well.

XXL	11-18-2006 09:39 PM

Re: Question for the ultra-low

2 Attachment(s)

A couple of pics from the craptastic phone cam...

SCOTI

11-18-2006 10:00 PM

Re: Question for the ultra-low

Cool. Time to cut the floor now . . .....

lowrollin70gmc

11-20-2006 12:30 AM

Re: Question for the ultra-low

Quick question. From this angle it looks like the brackets are angled the wrong way. Is it me or is there a reason for that?

fireout

11-20-2006 01:29 AM

Re: Question for the ultra-low

Quote:

Originally Posted by lowrollin70gmc (Post 1897001)

Quick question. From this angle it looks like the brackets are angled the wrong way. Is it me or is there a reason for that?

Looks like its easy enough to fix by unbolting the brackets and swapping sides.

gringoloco

11-20-2006 01:33 AM

Re: Question for the ultra-low

Quote:

Originally Posted by lowrollin70gmc (Post 1897001)

Quick question. From this angle it looks like the brackets are angled the wrong way. Is it me or is there a reason for that?

That's just XXl's 'triangulated trailing arm set-up'...:lol:

fireout

11-20-2006 01:52 AM

Re: Question for the ultra-low

Hmmm I didn't think of that. Might keep things lined up even better.

XXL	11-20-2006 10:33 AM

Re: Question for the ultra-low

Quote:

Originally Posted by gringoloco (Post 1897290)

That's just XXl's 'triangulated trailing arm set-up'...:lol:

Yeah, I've decided to do a trike ;)

Actually... that's the way it came to me from ECE :crazy: . I just didn't bother to switch them around yet.

lowrollin70gmc

11-27-2006 12:07 AM

Re: Question for the ultra-low

So ECE has a new triangulated setup? Sounds crazy, I'll have to try it.

I guess that answers questions about today's quality control.

XXL	11-30-2006 04:54 PM

Re: Question for the ultra-low

Quote:

Originally Posted by lowrollin70gmc (Post 1910119)

So ECE has a new triangulated setup? Sounds crazy, I'll have to try it.

Just in casy you weren't joking...

No. I bought one of their xmembers, and it came with the trailing arm mounts bolted up on the wrong sides. Only took me 15 minutes to swap them (compressor was in the basement for a project and 12 bolts are fine pitch) :whine:

All times are GMT -4. The time now is 01:32 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page