The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Ram Horns (https://67-72chevytrucks.com/vboard/showthread.php?t=330244)

Andy4639

02-24-2009 07:43 PM

Re: Ram Horns

Those are nice but they don't have the turn back on the driver's side one like the orignal ones to clear the mount.

Twisted78SS

02-24-2009 07:44 PM

Re: Ram Horns

Yeah, I see that now that you mention it. Never considered them so I guess I didn't look that close. Good catch!

leddzepp

02-24-2009 07:50 PM

Re: Ram Horns

Quote:

Originally Posted by cparman (Post 3162330)

leddzep. there is alot to be said for no exhaust leak. I have been both ways with good results, but i think I am over the header thing. Someone posted recently with part numbers for aftermarket ram horns manifolds made by the Dorman company. I have experience with their products, and They make a set of 2 1/2 in rams horn manifolds that should flow well, and not be a PIA

I run manifolds on my C-10, and love them. I have headers on my big block C-20 (came with them) and do not really care for them. They are full length, and fit great, no clearance issues. They seem to blow out exhaust gaskets all the time. I think I am going to try a set of copper ones next time. At some point down the road, I am going to put the manifolds back on.

Andy4639

02-24-2009 07:58 PM

Re: Ram Horns

They would make a engine compartment look nice though. I bet a set of the orignal ones would look as good as those coated with the chrome powder. I will work on the one I have this weekend and see how it goes.

cparman

02-24-2009 08:04 PM

Re: Ram Horns

3 Attachment(s)

had a set of hooker super comps on my Chevelle. BEFORE installing them I had the high temp coated black. Useda set of felpro header gaskets, and actually read the instructions. put them on ran car 20 or so, let cool and tightened the bolts again. after about 50 miles or so I tightened them one more time and never had a proble in the 4000 miles I drove this car

Andy4639

02-24-2009 08:09 PM

Re: Ram Horns

Funny we are talking about this on here and my bud at work sends me this on e-mail to check out. I wonder if I could get him to make me a set.:metal::lol::lol::lol:

http://www.moyermade.com/pictures/Chevy-side3b.jpg

http://www.moyermade.com/chevyV8.html

Andy4639

02-25-2009 08:11 PM

Re: Ram Horns

ttt

All times are GMT -4. The time now is 01:32 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page