The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Best Fitting Headers For a 66 (https://67-72chevytrucks.com/vboard/showthread.php?t=365358)

Re: Best Fitting Headers For a 66

Quote:

Originally Posted by shrunken66stroker (Post 3549835)

There have been people mentioning Headman shorties will work. The part number they gave was 69648. I'm thinking about giving these a try.
http://www.summitracing.com/search/?keyword=69648&dds=1

How did these headers work out for you ? I'm looking at them as well but want to make sue I wont have to change out my motor mounts for clearance issues.

Cheers,
Ed:ito:

Re: Best Fitting Headers For a 66

Quote:

Originally Posted by damnyankee36 (Post 3549876)

Well, I wound up ordering the Speedway Motors 9300100H. The 101H had the 1-5/8" primaries. The 100H's 1-1/2" is all I need.

http://www.speedwaymotors.com/Speedw...ders,3815.html

Figures they would go back-order!

We'll see how they fit.

Are u saying they back-ordered them? It seems like lotsa replies to your 1st questions were leading you toward full-length headers, whereas u asked re: 'shorties'. My thinking is those replies may have been trying to point out what I've read and heard about performance between the 2 types: most seem to believe u get better performance with the full-length type.

The ones u ordered surely are inexpensive--quite an incentive. But, compare wall-thickness, flange-thickness(I'd go for as close to 3/8-inch as possible as they are much stronger), and whether they fit angle-plug heads--u never know when u may go to such heads--just some things to consider. Also, the cheaper ones may not seal as well, which would always make u dissatisfied, regardless.

I used a set of coated--from Jegs (maybe Flow-Tech?)--that they had a special on. Already had bought a set of their brand, $100, shipping included; figuring if dissatisfied they'd stand behind their own brand better. But, before I needed them, they put some coated ones on special: about $200 including shipping. I bo't them and used them and they fit and hang perfectly--hafta bend over to really see, from side views, that it has headers on it. My truck is a '66 with sbc in rear position. Sorry I don't recall any part numbers or brand; but after 2 years, they seal as well as manifolds, perform quite well, and have not rusted or discolored.

So, if your order was back-ordered, maybe u would wanna re-think. Possible to stop/cancel the order? [But, at that price, u could always sell them quickly on C'list!] Or, u may not even be interested in performance. Good luck with your decision(s).
Sam

Re: Best Fitting Headers For a 66

Did you notice that's a 4 year old thread?

Re: Best Fitting Headers For a 66

Anyone have any experience with this setup? I have a 66 k10 lwb fleetside.

Re: Best Fitting Headers For a 66

very nice! Im thinking of getting hooker headers for my 66'.

Quote:

Originally Posted by Bennydog (Post 3549435)

Ive got hooker comp headers on my 65 sbc350 fit good no isssues

Re: Best Fitting Headers For a 66

Quote:

Originally Posted by Bennydog (Post 3549435)

Ive got hooker comp headers on my 65 sbc350 fit good no issues

I have the same, bored 4" holes in crossmember to keep the pipes up, excellent fit.