The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - dual snorkel air cleaner how to. (https://67-72chevytrucks.com/vboard/showthread.php?t=561524)

67anthony

02-11-2013 06:48 PM

Re: dual snorkel air cleaner how to.

Iam in looks great

doubleb's69

02-13-2013 10:27 AM

Re: dual snorkel air cleaner how to.

Quote:

Originally Posted by 54blackhornet (Post 5882255)

Question ? Would 2nd horn increase heat to carb if you had both connected to the vacume controller ? Like two heat risers off both manifolds open to warm up then close off when warm . IT IS COLD IN OREGON !:uhmk:
Posted via Mobile Device

I would think it would increase heat to the carb. You would have a riser off of both manifolds but I think you would have to space the snorkels out a little farther than I did to make it work easiest. I didn't worry about it because this is a fair weather truck so I cut the riser ports off and it is just a big hole there now for more air.

doubleb's69

06-07-2013 05:47 PM

Re: dual snorkel air cleaner how to.

1 Attachment(s)

Sorry it took so long but the stroker is in the truck and it looks pretty stock with the air cleaner on it.
Posted via Mobile Device
Posted via Mobile Device

oldblue1968chevy

06-07-2013 06:00 PM

Re: dual snorkel air cleaner how to.

Looks bad@## good job

doubleb's69

06-09-2013 10:30 PM

Re: dual snorkel air cleaner how to.

Quote:

Originally Posted by oldblue1968chevy (Post 6112583)

Looks bad@## good job

Thanks.
Posted via Mobile Device

All times are GMT -4. The time now is 04:02 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page