The 1947 - Present Chevrolet & GMC Truck Message Board Network - New to me 1965' "292" from Air Force Bus

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - New to me 1965' "292" from Air Force Bus (https://67-72chevytrucks.com/vboard/showthread.php?t=605103)

62k10&84k20burb

11-22-2013 02:57 PM

Re: New to me 1965' "292" from Air Force Bus

Quote:

Originally Posted by aotte1 (Post 6380401)

I know on the shifter , said to be long for removal by salvage guy!! And could not get the pin out to remove it. What is this trans used in?

Also thanks for help on ignition parts, I use NAPA a lot too.

Are the engine mounts same for K10?

I sure wish they handled the engine a little more carefully, bent some of the parts like fan.

Where is engine date code on the 292?

292s used different mounts than 250s and sbc and bbc

aotte1

11-22-2013 10:56 PM

Re: New to me 1965' "292" from Air Force Bus

60-66 thanks for the heads up on the hydraulic clutch set up. Will save and remove in time e.g. The bell housing etc.

Can send more detailed pics for you if needed. it looks to me like certain of the hoses were on the engine when it was painted. Can see a green tone on them. Will do some more viewing and report.

Les

All times are GMT -4. The time now is 01:53 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page