|
Re: 1967 C20 Flatbed Driver Project
2 Attachment(s)
Finished getting the bed bolted on and installed the tool boxes.
|
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
A few weeks ago we started the rust repair on the passenger side.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Wired up the lights and they work!!
Also installed the spare tire carrier. |
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Took it to the car wash for the first time a couple weekends ago.
|
Re: 1967 C20 Flatbed Driver Project
Super nice truck,looks like it's up to any task
|
Re: 1967 C20 Flatbed Driver Project
Quote:
|
Re: 1967 C20 Flatbed Driver Project
1 Attachment(s)
Well a month back we were able to have the truck painted.
Pulled the trim, emblems, windshield, ect. |
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Some pictures after we got it home and installed the new bumper, trim and emblems.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Here are some pictures I took today. It's mostly back together. The paint job came out good, far from perfect but great for a driver.
Before we installed the windshield we repainted the top of the dash and dash pad. We pulled the inner fenders before it was painted and cleaned up the engine bay (it was nasty). Both inner fenders had a little rust so instead of having to sandblast/repair them we bought new ones. We are going to go back and paint the inside of the doors and door jams. |
Re: 1967 C20 Flatbed Driver Project
4 Attachment(s)
Pics
|
Re: 1967 C20 Flatbed Driver Project
4 Attachment(s)
Last pics
|
Re: 1967 C20 Flatbed Driver Project
Came out super nice! :metal:
|
Re: 1967 C20 Flatbed Driver Project
Absolutely awesome! That bed just looks killer on there, can't wait to see a load on the back :metal:
|
Re: 1967 C20 Flatbed Driver Project
Look's great.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Quote:
Quote:
Quote:
Saturday we removed the seat and sprayed the floor with SEM Rock-it Liner. It sprayed out easy and gave us the texture we wanted. Pictures after it cured and with the seat installed. |
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Pics
|
Re: 1967 C20 Flatbed Driver Project
Great thread, keep us posted . . .
|
Re: 1967 C20 Flatbed Driver Project
Very well done!!!
I like the flooring!!! I have no use for carpet in my pickups..... I routed plug wires in a similar way on my old 67 Bel Air, used straight plug ends though. Wires for a 77 Corvette are routed under engine, they used rams horn manifolds also, if you ever wanted to hide them... |
Re: 1967 C20 Flatbed Driver Project
BTW, maybe this has be asked and answered already, but what motor are you running in that rig?
|
Re: 1967 C20 Flatbed Driver Project
Looks very nice
|
Re: 1967 C20 Flatbed Driver Project
Quote:
Quote:
Quote:
|
Re: 1967 C20 Flatbed Driver Project
1 Attachment(s)
Today we drove 45 miles each way to the Ol' Marais River Run Car Show
Was a nice show and had a lot of trucks. |
Re: 1967 C20 Flatbed Driver Project
4 Attachment(s)
Finished swapping in a 14 bolt srw rear axle with 3.73 gears today.
Also converted the front to single wheel. |
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
And new wheels/tires.
|
Re: 1967 C20 Flatbed Driver Project
That thing will ride much better with new tire/wheel combo. Good choice!!!
Did that come with factory AC? If so, that's wild. I can't imagine a true work truck with AC...LOL |
| All times are GMT -4. The time now is 12:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com