1967 C20 Flatbed Driver Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic v6 GMC's** · 12-29-2016, 12:00 PM

We have had this truck since May and have slowly been working on getting it to be a driver.
I will start with some pics of when we got it.

**Classic v6 GMC's** · 12-29-2016, 12:04 PM

Pics

**Classic v6 GMC's** · 12-29-2016, 12:05 PM

Pics 2

**Classic v6 GMC's** · 12-29-2016, 12:13 PM

First thing we had to do was get rid of the camper. Four pickup loads of garbage and one load scrap aluminum later.

**Hart_Rod** · 12-29-2016, 12:17 PM

In

**Classic v6 GMC's** · 12-29-2016, 12:21 PM

Then we had to cut 30" out of the frame to get back down to the 127" wheelbase. We also cut a couple feet off the back of the frame.

**Classic v6 GMC's** · 12-29-2016, 12:47 PM

Then we were at the junk yard getting some other parts and walked by a 71 dump and noticed it was a small window. We cut the section out and here are some pics of it welded in, the start of body work and some primer.

**Classic v6 GMC's** · 12-29-2016, 12:49 PM

Pics

**Classic v6 GMC's** · 12-29-2016, 12:57 PM

And some paint!!

**Classic v6 GMC's** · 12-29-2016, 12:59 PM

And a new sliding rear window.

**Classic v6 GMC's** · 12-29-2016, 01:09 PM

And that is where we are now. I will post some more pics soon. We still need to put a passenger rocker on it, Install the gas tank and a few more things but getting close to being a driver.

**Classic v6 GMC's** · 01-02-2017, 10:26 PM

Here are some pics of the new seat cover from LMC.

**Classic v6 GMC's** · 01-02-2017, 10:31 PM

Today we bolted the bed on and welded the bumper on.
Also installed the tail lights and wired them up.

**Classic v6 GMC's** · 01-02-2017, 10:40 PM

And some more pictures I took today.

**Classic v6 GMC's** · 01-09-2017, 12:58 PM

We had these tool boxes in the garage for a while with the thought of using them for tool storage and they happened to be the right size.

Deer_hunter_088 · 01-09-2017, 01:12 PM

following

Aus69c20 · 01-10-2017, 07:13 AM

Looks great so far. I assume the trucks going to go to work now.

**Classic v6 GMC's** · 01-10-2017, 11:18 AM

Quote:

Originally Posted by Aus69c20

Looks great so far. I assume the trucks going to go to work now.

Thanks. I'm not sure how much work the truck is going to do but it will be a nice driver and ready to haul when necessary.

**Classic v6 GMC's** · 02-15-2017, 12:29 AM

Picked up a 62 gmc with a newer flatbed and decided it would look nicer on the 67
Going to clean it up, paint it and install the tool boxes.

**GR8-68** · 02-15-2017, 07:09 AM

Love it, nice work

**Classic v6 GMC's** · 02-15-2017, 11:56 AM

Quote:

Originally Posted by GR8-68

Love it, nice work

Thanks

**Classic v6 GMC's** · 02-18-2017, 11:52 PM

Wire wheeled the bed, got it prepped and painted. Will post some finished pics tomorrow.

**Classic v6 GMC's** · 02-19-2017, 11:15 PM

Pics of painted bed.

**Getter-Done** · 02-20-2017, 11:44 PM

That Flat bed looks Awesome!!!
I like that rear sliding window.
This is Probably the direction I will go with my Truck.
I have a C30 157 WB with a small back glass.

**Classic v6 GMC's** · 02-28-2017, 12:19 PM

Quote:

Originally Posted by Getter-Done

That Flat bed looks Awesome!!!
I like that rear sliding window.
This is Probably the direction I will go with my Truck.
I have a C30 157 WB with a small back glass.

Thanks

12-29-2016, 12:00 PM	#1
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	1967 C20 Flatbed Driver Project We have had this truck since May and have slowly been working on getting it to be a driver. I will start with some pics of when we got it. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:04 PM	#2
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Pics Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:05 PM	#3
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Pics 2 Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:13 PM	#4
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project First thing we had to do was get rid of the camper. Four pickup loads of garbage and one load scrap aluminum later. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:17 PM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: 1967 C20 Flatbed Driver Project In __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-29-2016, 12:21 PM	#6
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Then we had to cut 30" out of the frame to get back down to the 127" wheelbase. We also cut a couple feet off the back of the frame. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:47 PM	#7
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Then we were at the junk yard getting some other parts and walked by a 71 dump and noticed it was a small window. We cut the section out and here are some pics of it welded in, the start of body work and some primer. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:49 PM	#8
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Pics Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:57 PM	#9
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project And some paint!! Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 12:59 PM	#10
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project And a new sliding rear window. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

12-29-2016, 01:09 PM	#11
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project And that is where we are now. I will post some more pics soon. We still need to put a passenger rocker on it, Install the gas tank and a few more things but getting close to being a driver. __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

01-02-2017, 10:26 PM	#12
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Here are some pics of the new seat cover from LMC. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

01-02-2017, 10:31 PM	#13
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Today we bolted the bed on and welded the bumper on. Also installed the tail lights and wired them up. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

01-02-2017, 10:40 PM	#14
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project And some more pictures I took today. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

01-09-2017, 12:58 PM	#15
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project We had these tool boxes in the garage for a while with the thought of using them for tool storage and they happened to be the right size. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more



Register or Log In To remove these advertisements.

01-09-2017, 01:12 PM	#16
Deer_hunter_088 Registered User Join Date: Aug 2016 Location: Mount Carmel Illinois Posts: 1,323	Re: 1967 C20 Flatbed Driver Project following __________________ 1967 GMC C25 305 V6 1969 K20 CST 1994 k1500, Oldredz71(ext shorty 4x4 6 in lift) 1998 S10ZR2 2001 Silverado 2500hd 8.1L 2003 Silverado 2500hd Crew cab

01-10-2017, 07:13 AM	#17
Aus69c20 Registered User Join Date: Jun 2015 Location: Melbourne, Australia Posts: 231	Re: 1967 C20 Flatbed Driver Project Looks great so far. I assume the trucks going to go to work now. __________________ John 69 c20, 396, th400, dana60, ps, ac Last edited by Aus69c20; 01-10-2017 at 07:15 AM. Reason: Hard to understand original post

02-15-2017, 12:29 AM	#19
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Picked up a 62 gmc with a newer flatbed and decided it would look nicer on the 67 Going to clean it up, paint it and install the tool boxes. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

02-15-2017, 07:09 AM	#20
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 1967 C20 Flatbed Driver Project Love it, nice work __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

02-18-2017, 11:52 PM	#22
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Wire wheeled the bed, got it prepped and painted. Will post some finished pics tomorrow. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

02-19-2017, 11:15 PM	#23
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1967 C20 Flatbed Driver Project Pics of painted bed. Attached Images __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

02-20-2017, 11:44 PM	#24
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,657	Re: 1967 C20 Flatbed Driver Project That Flat bed looks Awesome!!! I like that rear sliding window. This is Probably the direction I will go with my Truck. I have a C30 157 WB with a small back glass.

Register or Log In To remove these advertisements.