The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CA Parting out 69 GMC 1/2 ton truck (https://67-72chevytrucks.com/vboard/showthread.php?t=567933)

CamberC10

02-26-2013 09:17 PM

Re: Parting out 69 GMC 1/2 ton truck

Jenn how about just the headlight bezels,eye brow trim and the hood trim? Let me know. Thanks
Posted via Mobile Device

jeremiah king

02-26-2013 09:23 PM

Re: Parting out 69 GMC 1/2 ton truck

[QUOTE=CamberC10;5915117]Jenn how about just the headlight bezels,eye brow trim and the hood trim? Let me know. Thanks
Posted via Mobile Device[/QUOTE

I don't want to seperate the hood trim from the grille. I could do $95 shipped for the eyebrows and headlight bezels. 40$ eyebrows & $40 for the bezels. let me know

CamberC10

02-26-2013 09:29 PM

Re: Parting out 69 GMC 1/2 ton truck

Ok I'll take the bezels and eye brow trims. How do you take payment?
Posted via Mobile Device

jeremiah king

02-26-2013 09:37 PM

Re: Parting out 69 GMC 1/2 ton truck

4 Attachment(s)

Quote:

Originally Posted by Undone (Post 5912502)

Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

The Visors are nice, but the passenger side one has a small crease on it and feels like the layers inside are seperated. Does that make sense, they look nice and the clips are nice, but the ones feels different. $30 shipped on the visors and clips
The Armrests are not available and let me know about the dash pad, cause there are a few people interested in it.

jeremiah king

02-26-2013 09:38 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by CamberC10 (Post 5915157)

Ok I'll take the bezels and eye brow trims. How do you take payment?
Posted via Mobile Device

paypal kingstrucks@yahoo.com thanks Jenn

jeremiah king

02-26-2013 09:42 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by nobolt (Post 5914645)

thanks Jenn. does that fuel valve rotate easily? mine is stiff as heck.

i also need front fender pieces (wall art)(from the rear of the marker light foreward)
but only if the whole fender isnt useful.

thanks,

I will check if this one it tight or not, I might have a couple. I can let you know on the fenders for art, so you want them to have nice front fender pockets?

Undone

02-26-2013 10:04 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by jeremiah king (Post 5915184)

I"ll pass, Thanks

jeremiah king

02-26-2013 10:21 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by southern parts (Post 5913065)

i`ll take the dash pad if it makes it to me.

You are next in line for the dash pad. $50 shipped. If you want it you can paypal me kingstrucks@yahoo.com

71veronica

02-26-2013 11:11 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by jeremiah king (Post 5914182)

On the grille, eyebrow trim and upper trim piece I can do $200 plus shipping (zip code needed). If you want to break it down into individual pieces it will cost you more. That is my package deal. Let me know if you are interested in ANY or ALL of the pieces. Jenn

if no one has taken the grille deal i will i need all of it. 84062

thanks

rusty knuckles 5

02-26-2013 11:26 PM

Re: Parting out 69 GMC 1/2 ton truck

Hi im looking for the lower support brace that supports from the lower flang of vacume booster to the firewall and 2 small gas caps for the square style saddle tanks if nobody has spoke for them thanks!

jeremiah king

02-26-2013 11:33 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by 71veronica (Post 5915461)

if no one has taken the grille deal i will i need all of it. 84062

thanks

Eyebrows and headlight bezels are sold.

I have the grille and upper trim still available. Let me know if you want a shipping quote. Jenn

jeremiah king

02-26-2013 11:35 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by rusty knuckles 5 (Post 5915496)

Is the brace you are talking about like a rod with flattened ends with holes on it? I will have to check on the gas tanks. I haven't even looked under to see if they are still there. hahahahah

rusty knuckles 5

02-26-2013 11:56 PM

Re: Parting out 69 GMC 1/2 ton truck

The one that i am looking for is made frome small channel iron i think is about 3/4 inch wide or so! i have the upper support it is made of round stock and smashed on bothe ends with a hole thanks

JORGIE95961

02-27-2013 12:56 AM

Re: Parting out 69 GMC 1/2 ton truck

AC ball vent hose adapter , and defrost vents to 95961

bollybib

02-27-2013 11:10 AM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by jeremiah king (Post 5914175)

Hey Jim, How's it going? The defrost vents are shot and no fan shroud, I am sure I have the grommet you are talking about. Let me check today. Also do you still need those extra brake lines or did you fab them yourself? let me know. Jenn

Hi Jenn, I can use the grommets. Can't say when I'm going to get to the brake booster install so don't go to any effort to save the brake lines for me. I'll deal with it when I get there.

DaHos

02-27-2013 11:16 AM

Re: Parting out 69 GMC 1/2 ton truck

In line for dash pad, I think after woody..

71veronica

02-27-2013 11:24 AM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by jeremiah king (Post 5915511)

Eyebrows and headlight bezels are sold.

I have the grille and upper trim still available. Let me know if you want a shipping quote. Jenn

as long as there are no major dents and mounting brackets are good. shipping to 84062 utah.

thanks

jeremiah king

02-27-2013 01:53 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by rusty knuckles 5 (Post 5915563)

The one that i am looking for is made frome small channel iron i think is about 3/4 inch wide or so! i have the upper support it is made of round stock and smashed on bothe ends with a hole thanks

Got it! I can do $10 plus shipping on that and I will let you know about the gas caps.

jeremiah king

02-27-2013 01:54 PM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by 71veronica (Post 5916218)

as long as there are no major dents and mounting brackets are good. shipping to 84062 utah.

thanks

There is a dent on the upper trim as you can see in the pics above, there are a few little tiny ones on the bottom of the grille also.

buddylee

02-27-2013 02:03 PM

Re: Parting out 69 GMC 1/2 ton truck

any luck on passenger inner fender? how about a usable passenger fender cup

southern parts

02-27-2013 10:30 PM

Re: Parting out 69 GMC 1/2 ton truck

payment sent for the dash pad. thanks, Woody

rusty knuckles 5

02-27-2013 11:32 PM

Re: Parting out 69 GMC 1/2 ton truck

Ok! I will take it, please let me know about the gas caps thanks

71veronica

02-28-2013 01:09 AM

Re: Parting out 69 GMC 1/2 ton truck

Quote:

Originally Posted by jeremiah king (Post 5916494)

There is a dent on the upper trim as you can see in the pics above, there are a few little tiny ones on the bottom of the grille also.

how much for just the grill?

thanks

birdistheword

02-28-2013 01:50 AM

Re: Parting out 69 GMC 1/2 ton truck

Would like to possibly get in line for the grill. How much shipped to 98433?

tdavidson68

02-28-2013 08:07 PM

Re: Parting out 69 GMC 1/2 ton truck

I might be interested in cab when you get it to that point. Gotta buddy out that way who could probably hold on to it for me til figure out a shipping plan. How's the underside of it look. Mine has spent too many years in Ohio Thanks

All times are GMT -4. The time now is 12:03 AM.

Page 3 of 6

Show 40 post(s) from this thread on one page