CA Parting out 69 GMC 1/2 ton truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeremiah king · 02-25-2013, 06:01 PM

I just picked this truck up and are going to start parting it out as soon as anyone needs anything.
Let me know what you need and I can get you some prices as well as pics
I do not have a list of prices to post at this point because I want to see what parts are going to be needed first, as far as where to start. I saw there was a thread saying "not to hog the parts board with individual listings" so I thought this was a good way to make sure I wasn't doing that.
thanks for checking out our thread. Jenn (Jeremiah's wife)

*Maximuz* · 02-25-2013, 06:07 PM

How much for glovebox emblem? Can u get me a close up pic?
Posted via Mobile Device

**uncle** · 02-25-2013, 06:21 PM

Does it have engine?
Posted via Mobile Device

jeremiah king · 02-25-2013, 06:36 PM

Nope, no engine. It was a small block truck originally.

72K20SUBN · 02-25-2013, 07:31 PM

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

jeremiah king · 02-25-2013, 07:41 PM

Quote:

Originally Posted by 72K20SUBN

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

I probably have it in a few cabs out here, Let me see what I got for you. Jenn

Undone · 02-25-2013, 08:04 PM

Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

noch · 02-25-2013, 08:08 PM

how much for the hood GMC emblem? 72205.

Oddfire · 02-25-2013, 08:10 PM

I'm interested in the following items: armrests, door panel hardware if usable,
glove box & mounting hardware, shift ind & pointer, ac ball & center vents &
hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71

Longhorn

**N2TRUX** · 02-25-2013, 08:21 PM

Your going to need to price some of the parts to get this in compliance.

Oddfire · 02-25-2013, 08:26 PM

2nd in line for arm rests.

1972K20 · 02-25-2013, 08:33 PM

How is that tailgate? It looks like it's pushed in a little?

jeremiah king · 02-25-2013, 08:43 PM

Quote:

Originally Posted by N2TRUX

Your going to need to price some of the parts to get this in compliance.

Thank you for the message, I am working on it! Jenn

jeremiah king · 02-25-2013, 08:45 PM

Quote:

Originally Posted by 1972K20

How is that tailgate? It looks like it's pushed in a little?

You are correct, although it is worse than the picture shows. Thanks for asking. Jenn

Matts Kustoms · 02-25-2013, 08:49 PM

I would like the engine mounts if they are good shape and for a small block, quote to 48030 and some pics?
Posted via Mobile Device

nobolt · 02-25-2013, 08:51 PM

hi Jenn, i would be interested in fuel valve and bezel, fuel tank dash switch and wiring, and also the drivers side saddle tank and sending unit, if working.
shipping to 48001.
and no hurry on shipping.
thank you,
Dave

CamberC10 · 02-25-2013, 08:54 PM

How about the headlight bezels ? I'd like them. If the grille in good condition I'd like that too. Please let me know.
Posted via Mobile Device

CamberC10 · 02-25-2013, 08:56 PM

Also if the fender/hood trim are good I'd like those as well. The trim above and to the side of the grille if you know what I mean.
Posted via Mobile Device

jeremiah king · 02-25-2013, 09:00 PM

Quote:

Originally Posted by CamberC10

Also if the fender/hood trim are good I'd like those as well. The trim above and to the side of the grille if you know what I mean.
Posted via Mobile Device

I like to call that eyebrow trim, what about the top trim on the grille? I will get you a price and pics asap. Jenn

Dale_Brown · 02-25-2013, 09:08 PM

Gauge cluster price shipped to 21122. Hoping it was a V8

poorboyz67gmc · 02-25-2013, 09:26 PM

I would like to get in line on the fender/eyebrow trim.

CamberC10 · 02-25-2013, 09:32 PM

Yes the top trim of the grill as well.
Posted via Mobile Device

Truckseats · 02-25-2013, 09:37 PM

I would like to get inline on the upper grill trim pending the price. Also, do you have keys for the locks on the fuel doors? Thanks

jeremiah king · 02-25-2013, 09:51 PM

Quote:

Originally Posted by Maximuz

How much for glovebox emblem? Can u get me a close up pic?
Posted via Mobile Device

I don't want to sell just the emblem on this one. The box is to nice. thanks Jenn

jeremiah king · 02-25-2013, 10:14 PM

GMC Hood Emblems - $30 shipped
Typical chrome imperfections, "C" letter has little pitting.

Small Block Motor mounts - $40 shipped

02-25-2013, 06:01 PM	#1
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Parting out 69 GMC 1/2 ton truck I just picked this truck up and are going to start parting it out as soon as anyone needs anything. Let me know what you need and I can get you some prices as well as pics I do not have a list of prices to post at this point because I want to see what parts are going to be needed first, as far as where to start. I saw there was a thread saying "not to hog the parts board with individual listings" so I thought this was a good way to make sure I wasn't doing that. thanks for checking out our thread. Jenn (Jeremiah's wife) Attached Images __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

02-25-2013, 06:07 PM	#2
Maximuz Account Suspended Join Date: Jan 2013 Location: California Posts: 132	Re: Parting out 69 GMC 1/2 ton truck How much for glovebox emblem? Can u get me a close up pic? Posted via Mobile Device

02-25-2013, 06:21 PM	#3
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Parting out 69 GMC 1/2 ton truck Does it have engine? Posted via Mobile Device

02-25-2013, 06:36 PM	#4
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting out 69 GMC 1/2 ton truck Nope, no engine. It was a small block truck originally. __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

02-25-2013, 07:31 PM	#5
72K20SUBN Registered User Join Date: Feb 2008 Location: Boise, ID. Posts: 29	Re: Parting out 69 GMC 1/2 ton truck Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated. Thanks. __________________ 72K20SUBN: - '72 Suburban K20 - '72 Cheyenne K20 - '71 Custom20 Deluxe 4x4 - '63 Pontiac Bonneville 2Dr HT

02-25-2013, 08:04 PM	#7
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Parting out 69 GMC 1/2 ton truck Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

02-25-2013, 08:08 PM	#8
noch Registered User Join Date: Jan 2013 Location: Little Rock AR Posts: 18	Re: Parting out 69 GMC 1/2 ton truck how much for the hood GMC emblem? 72205.

02-25-2013, 08:10 PM	#9
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 69 GMC 1/2 ton truck I'm interested in the following items: armrests, door panel hardware if usable, glove box & mounting hardware, shift ind & pointer, ac ball & center vents & hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71 Longhorn

02-25-2013, 08:21 PM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Parting out 69 GMC 1/2 ton truck Your going to need to price some of the parts to get this in compliance. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-25-2013, 08:26 PM	#11
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 69 GMC 1/2 ton truck 2nd in line for arm rests.

02-25-2013, 08:33 PM	#12
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: Parting out 69 GMC 1/2 ton truck How is that tailgate? It looks like it's pushed in a little?

02-25-2013, 08:49 PM	#15
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: Parting out 69 GMC 1/2 ton truck I would like the engine mounts if they are good shape and for a small block, quote to 48030 and some pics? Posted via Mobile Device

02-25-2013, 08:51 PM	#16
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Parting out 69 GMC 1/2 ton truck hi Jenn, i would be interested in fuel valve and bezel, fuel tank dash switch and wiring, and also the drivers side saddle tank and sending unit, if working. shipping to 48001. and no hurry on shipping. thank you, Dave __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-25-2013, 08:54 PM	#17
CamberC10 Registered User Join Date: Jan 2013 Location: Altamonte Springs,Florida Posts: 98	Re: Parting out 69 GMC 1/2 ton truck How about the headlight bezels ? I'd like them. If the grille in good condition I'd like that too. Please let me know. Posted via Mobile Device

02-25-2013, 08:56 PM	#18
CamberC10 Registered User Join Date: Jan 2013 Location: Altamonte Springs,Florida Posts: 98	Re: Parting out 69 GMC 1/2 ton truck Also if the fender/hood trim are good I'd like those as well. The trim above and to the side of the grille if you know what I mean. Posted via Mobile Device



Register or Log In To remove these advertisements.

02-25-2013, 09:08 PM	#20
Dale_Brown Registered User Join Date: Dec 2012 Location: Pasadena, Maryland Posts: 169	Re: Parting out 69 GMC 1/2 ton truck Gauge cluster price shipped to 21122. Hoping it was a V8

02-25-2013, 09:26 PM	#21
poorboyz67gmc Registered User Join Date: Jan 2012 Location: Westmoreland, TN Posts: 20	Re: Parting out 69 GMC 1/2 ton truck I would like to get in line on the fender/eyebrow trim.

02-25-2013, 09:32 PM	#22
CamberC10 Registered User Join Date: Jan 2013 Location: Altamonte Springs,Florida Posts: 98	Re: Parting out 69 GMC 1/2 ton truck Yes the top trim of the grill as well. Posted via Mobile Device

02-25-2013, 09:37 PM	#23
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: Parting out 69 GMC 1/2 ton truck I would like to get inline on the upper grill trim pending the price. Also, do you have keys for the locks on the fuel doors? Thanks

02-25-2013, 10:14 PM	#25
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting out 69 GMC 1/2 ton truck GMC Hood Emblems - $30 shipped Typical chrome imperfections, "C" letter has little pitting. Small Block Motor mounts - $40 shipped Attached Images __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

Register or Log In To remove these advertisements.