Re: Parting out 69 GMC 1/2 ton truck
 

I have the bracket that you need ready to ship. It still has the little wire clip on it for the Prop. Valve. I do not have the gas tank caps you need. This trucks tanks have been removed. With shipping on the bracket it's $15. You can paypal kingstrucks@yahoo.com. thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

$190 shipped to your door. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Here is what I have.

Re: Parting out 69 GMC 1/2 ton truck
 

Here is a picture of another center AC vent I have. The glove box and hardware are still available on this truck also. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Jenn: If you look at the first pic you'll see the black plastic piece with the hole in it. The 2nd pic shows where another one is suppose to be. These black pieces hold the center vent in the frame. I'm wondering if you have
a broken center vent that this piece can be taken off of or do i have to get the whole vent assy? Jamie 71 :chevy::gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

I have quite a few of the black venting pieces. Is that all you need?

Re: Parting out 69 GMC 1/2 ton truck
 

I will look closer to see if that is infact a hole, I think it might be a shadow.

Re: Parting out 69 GMC 1/2 ton truck
 

Its a hole cause the vent hinges on them :) I might need some more items
i'll let you know. Save me a couple of those pieces. Thanks Jamie 71 :gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

thanks on the support brkt pm sent

Re: Parting out 69 GMC 1/2 ton truck
 

ill take it.

Re: Parting out 69 GMC 1/2 ton truck
 

washer reservior? 89104 rear axle to light harness. heater dash vents.

Re: Parting out 69 GMC 1/2 ton truck
 

Hi Jenn,
Not sure if you sold the trim with the grill. If not I would like to get a price for those. Also, please price the left rear light assembly (bucket and all) and the left rear side marker. Thank you Ma'am.

P.S. I'm in Oceanside and would prefer to come out to you for pick up, if that doesn't work for you I'm at 92058.

Erin

Re: Parting out 69 GMC 1/2 ton truck
 

What condition and how much for the driver's front fender shipped to 98433?

Re: Parting out 69 GMC 1/2 ton truck
 

You can paypal $180 to kingstrucks@yahoo.com

Re: Parting out 69 GMC 1/2 ton truck
 

Hey Erin, I can get the parts into Vista, I have the top grille trim still but the grille is sold. I could do $50 for all. How is your bedside if all those parts are damaged? We have rear bedside sections also. Let me know. I will PM you my phone number also. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Still waiting on reply about black center vent pieces. Jamie 71 :gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

what aboout the washer fluid res. I saw iy in a how much to 89104

Re: Parting out 69 GMC 1/2 ton truck
 

Jeremiah is keeping the drivers fender for our GMC. thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Here are 2 of the black center AC venting diverters that I have. I would do $20 on the pair plus shipping. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Jenn,
Thanks for getting back and sorry for the late reply on that kick panel vent assembly.
I'm not in need of the vent door, or the actuator itself, but understand if you don't want to separate.
If you don't want to separate, what do you need to get for the entire setup?
and if you're willing to separate, how much for just the arm/spring/bracket?

Also, Could I get a better pic of the backside of bracket itself. From what I can see, its hard to tell if it is the original piece.

Thanks

Re: Parting out 69 GMC 1/2 ton truck
 

I can do $20 to your door on the whole thing. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Jenn: Those aren't the pieces i'm looking for. I need the 2 small black pieces approx 1/2" long & 5/16" wide w/3/16" hole in it & this is what holds the metal
vent piece to the plastic chrome frame. I don't need the black part that the hoses attatch to. The one i have is fine. I just need these 2 small black plastic parts that hold the vent grate in place. The plastic piece about dead center of the pic i'm posting. Jamie 71 :gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

I'm looking for a passenger side taillight patch if you're cutting up the bed side. thanks

Re: Parting out 69 GMC 1/2 ton truck
 

Hi Jenn,
Regarding the vent door & actuator assembly, I'm pretty much sure I'll take it. I'll send you a PM with my address etc. Would still like one more shot of the back side of that bracket when you get a chance.

Thanks.

Re: Parting out 69 GMC 1/2 ton truck
 

In what condition is the diverter box under the dash? Also do you have the air vent that goes in the engine compartment/top of the cowl? Also a/c vacuum canister.

Re: Parting out 69 GMC 1/2 ton truck
 

hey go ahead and pass the grill onto next person in line. sorry just dont need one right now. thanks for your time

Re: Parting out 69 GMC 1/2 ton truck
 

got the dash pad today. looks great. thanks, Woody

Re: Parting out 69 GMC 1/2 ton truck
 

is it an a/c truck?

Re: Parting out 69 GMC 1/2 ton truck
 

grill is sold

Re: Parting out 69 GMC 1/2 ton truck
 

speedracer
i have bed paches. what are you looking for?

Re: Parting out 69 GMC 1/2 ton truck
 

This is an ac truck.

Re: Parting out 69 GMC 1/2 ton truck
 

Do you still have the shift indicator lens that mounts to the top of the steering column. I just need the clear part with P, R, N, D, L, L

Re: Parting out 69 GMC 1/2 ton truck
 

I will check and see if ihave a indcator.

Re: Parting out 69 GMC 1/2 ton truck
 

I'll take the rear window trim and front window trim. pm me with price and shipping to 77578.

Thanks,

Kev.

Re: Parting out 69 GMC 1/2 ton truck
 

sorry the rear window trim, thought it had trim on the windshield lol....

Re: Parting out 69 GMC 1/2 ton truck
 

I would be interested in the shift indicator. Price? Picture? Thanks!

Re: Parting out 69 GMC 1/2 ton truck
 

Anything on the pass inner fender?
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

I have to ask even though shipping (to 29651) is likely crazy - how much for the leaf springs?

Thanks
-Brian

Re: Parting out 69 GMC 1/2 ton truck
 

I will see if I have some nice windshield trim. I will get back to you, the worst part if the top windshield trim, being so long, But I can get you a quote. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

I am not selling the shift indicator by it self. I am selling the column as a WHOLE. $100 shipped. thanks Jenn