Re: UXDesigner's 1967 C10 - The Keeper
 

Finally completed the door window installation with all new glass. Also wired the power window regulators with 80's GM chrome power switches, vents were completely rebuilt and permanently sealed with 3M urethane since I will be installing A/C. Next up are painting the door panels and installing, Vintage Air, stereo system and cut and buff the paint once everything is complete.

http://stickyxd.com/c10/67/6332D7DB-...516A164D34.JPG

Re: UXDesigner's 1967 C10 - The Keeper
 

Those are factory vent windows that we're refurbished? I have new aftermarket ones that leak wind noise like crazy. Do yours leak air? Truck looks great in the sun!

Re: UXDesigner's 1967 C10 - The Keeper
 

lookin good

Re: UXDesigner's 1967 C10 - The Keeper
 

Yes, I personally refurbished them with precision parts. Once installed I also had a lot of wind noise on the passenger side so ran a bead of window urethane along the outside between the glass and rubber to seal both sides. You can’t open them anymore which is fine since I plan to install a vintage air system but the cab is now silent.

Re: UXDesigner's 1967 C10 - The Keeper
 

New steering wheel and power window switches installed into the door panels

http://stickyxd.com/c10/67/DD346C64-...63519073B8.JPG
http://stickyxd.com/c10/67/A32923AB-...E12579A40C.JPG

Re: UXDesigner's 1967 C10 - The Keeper
 

Looks great like the interior

Re: UXDesigner's 1967 C10 - The Keeper
 

Thanks, appreciate the feedback!

Re: UXDesigner's 1967 C10 - The Keeper
 

Just hit 450 miles, running strong! Still have door panels to paint and A/C to install.

Re: UXDesigner's 1967 C10 - The Keeper
 

Man that's great. I'm jealous how fast your build has gone and already clocking miles.

Re: UXDesigner's 1967 C10 - The Keeper
 

I had set a goal to enter the truck in this years 4th of July parade, we made it! Kids had a blast! Still logging miles and still need to get around to the A/C and door panels.

http://stickyxd.com/c10/67/A7F67D50-...3642E9B64E.JPG
http://stickyxd.com/c10/67/22326015-...67C69C39F5.JPG

Re: UXDesigner's 1967 C10 - The Keeper
 

Did you see a '58 or '59 Apache they call Jackelope? The owners are my family!!! :)

Re: UXDesigner's 1967 C10 - The Keeper
 

That’s awesome! I did see a truck of that era at the end of the route but I honestly didn’t ID it as Jackelope. This parade was up in Chester, Ca. If Jackelope was there, I did see it. I wish I would have known it was a family member from the board.

Re: UXDesigner's 1967 C10 - The Keeper
 

I’ve been busy and putting off the A/C install because it’s been ironically too hot in the garage to work on the truck. Now that the weather has cooled of I’ve decided to wrap up the final task on the truck but I can’t decide on the lower or upper compressor setup. I find that the more I read on the subject the more confused I get and the technology keeps changing. Computer controlled or not, low or high mount, fan control, hose types, etc... looking for advice from someone that just installed an A/C system in the past 1 - 2 months.

Re: UXDesigner's 1967 C10 - The Keeper
 

nice looking truck man!

Re: UXDesigner's 1967 C10 - The Keeper
 

how are the intellitronix gauges working out for u?

Re: UXDesigner's 1967 C10 - The Keeper
 

Thanks for the compliment!

Re: UXDesigner's 1967 C10 - The Keeper
 

So far everything is working excellent! This is the second time I’ve used them and I haven’t had any issues.

Re: UXDesigner's 1967 C10 - The Keeper
 

Installed the Kwik Performance A/C Bracket and Sanden compressor. Easy install and my intake still clears without any issues.

http://stickyxd.com/c10/67/Photo Jan 28, 5 21 10 PM.jpg
http://stickyxd.com/c10/67/Photo Jan 28, 5 21 07 PM.jpg
http://stickyxd.com/c10/67/Photo Jan 28, 5 21 18 PM.jpg
http://stickyxd.com/c10/67/Photo Feb 25, 1 35 37 PM.jpg
http://stickyxd.com/c10/67/Photo Feb 25, 1 35 09 PM.jpg

Re: UXDesigner's 1967 C10 - The Keeper
 

Where did you buy the bracket and compressor?

Re: UXDesigner's 1967 C10 - The Keeper
 

I bought the bracket, compressor, condenser kit with lines and dryer all from Jegs online during a holiday discount promotion.

Re: UXDesigner's 1967 C10 - The Keeper
 

Still logging miles around town and just now wrapping up the A/C system. I still have door panels to paint but since the truck has been running excellent it hasn’t been a priority and I’m just enjoying the driving experience.