The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   FL Un-needed parts (https://67-72chevytrucks.com/vboard/showthread.php?t=390774)

Hart_Rod 03-25-2010 02:10 AM
Re: Un-needed parts
 
ttt

dabels23 03-25-2010 09:19 AM
Re: Un-needed parts
 
Do you still have the center ac vent?

69-72 03-26-2010 08:01 PM
Re: Un-needed parts
 
Do you have a heat riser stove pipe or the trim ring from around the 4x4 shift boot?

Hart_Rod 03-27-2010 04:31 PM
Re: Un-needed parts
 
Quote:
Originally Posted by dabels23 (Post 3880961)
Do you still have the center ac vent?
No it's been sold.

Quote:
Originally Posted by 69-72 (Post 3883990)
Do you have a heat riser stove pipe or the trim ring from around the 4x4 shift boot?
No riser. I'll look for the ring.

R/

Hart_Rod 03-31-2010 11:40 AM
Re: Un-needed parts
 
Quote:
Originally Posted by 69-72 (Post 3883990)
Do you have a heat riser stove pipe or the trim ring from around the 4x4 shift boot?
Sorry no ring.

Hart_Rod 04-02-2010 01:18 PM
Re: Un-needed parts
 
bump

Hart_Rod 04-09-2010 11:48 AM
Re: Un-needed parts
 
lots of stuff for sale, :D.

Hart_Rod 04-14-2010 10:40 AM
Re: Un-needed parts
 
bump

m6z 04-15-2010 08:39 AM
Re: Un-needed parts
 
68 steering wheel with horn button - $100 + shipping

Are there any cracks? It's gold right? Would you take $100 shipped to 66762?

Hart_Rod 04-15-2010 09:18 AM
Re: Un-needed parts
 
Quote:
Originally Posted by m6z (Post 3921360)
68 steering wheel with horn button - $100 + shipping

Are there any cracks? It's gold right? Would you take $100 shipped to 66762?
It does have some hairline cracks, but should be easy to restore. It came out of a 68 50th that I sold a while back. I'll go $100 shipped.

Hart_Rod 04-28-2010 10:35 AM
Re: Un-needed parts
 
bump

67-1sttimer 05-01-2010 11:18 PM
Re: Un-needed parts
 
Have a drivable radiator for 67 250 6 3spd manual trans? Shipped to 75150Thanks, Chris

Hart_Rod 05-02-2010 04:03 PM
Re: Un-needed parts
 
Quote:
Originally Posted by 67-1sttimer (Post 3952506)
Have a drivable radiator for 67 250 6 3spd manual trans? Shipped to 75150Thanks, Chris
I've got a nearly new 4 core radiator that I would sell for $130 shipped.

R/

swyfor5 05-02-2010 05:47 PM
Re: Un-needed parts
 
Interested in the 4 core radiator, got any pic's, do you still have it?

Hart_Rod 05-02-2010 06:01 PM
Re: Un-needed parts
 
3 Attachment(s)
Quote:
Originally Posted by swyfor5 (Post 3953657)
Interested in the 4 core radiator, got any pic's, do you still have it?
Here you go.

swyfor5 05-02-2010 06:37 PM
Re: Un-needed parts
 
Thank's, gonna go all new here.

67-1sttimer 05-02-2010 11:24 PM
Re: Un-needed parts
 
Hart_Rod, ill take that radiator if its in good bolt on condition for my 250 srtaight 6. Thanks, Chris.

Hart_Rod 05-02-2010 11:29 PM
Re: Un-needed parts
 
Quote:
Originally Posted by 67-1sttimer (Post 3954396)
Hart_Rod, ill take that radiator if its in good bolt on condition for my 250 srtaight 6. Thanks, Chris.
Chris,

You'll have to change the upper/lower radiator mounts. I have the upper ones that I will throw in and I'll have look and see if I have some extra lower ones. Other than that, I think everything else should be bolt on.

R/

67-1sttimer 05-02-2010 11:42 PM
Re: Un-needed parts
 
I appreciate it, i dont any way fab anything so i need a bolt setup or oem, Thanks,Chris

Hart_Rod 05-02-2010 11:48 PM
Re: Un-needed parts
 
Quote:
Originally Posted by 67-1sttimer (Post 3954458)
I appreciate it, i dont any way fab anything so i need a bolt setup or oem, Thanks,Chris
No fab required. The upper 4 core mounts bolt on. The rear mounts are riveted on. You can just drill out the rivet and then bolt the new mounts back on. All core supports were setup to accept all sizes of radiators. Let me know.

r/

67-1sttimer 05-03-2010 12:18 AM
Re: Un-needed parts
 
LCool i could do that, let me know if you have the lower/rear mounts to include and ill take it, Thanks.

Hart_Rod 05-04-2010 12:16 PM
Re: Un-needed parts
 
Quote:
Originally Posted by 67-1sttimer (Post 3954533)
LCool i could do that, let me know if you have the lower/rear mounts to include and ill take it, Thanks.
I've got both uppers and one lower. The other one should be easy to find in th parts section. I'll check one more place for another lower. Let me know what you want to do.

R

67-1sttimer 05-04-2010 10:14 PM
Re: Un-needed parts
 
Im probably gonna go new on the radiator ill pass for now thanks, Chris

Hart_Rod 05-08-2010 02:33 PM
Re: Un-needed parts
 
bttt

Jobe72 05-11-2010 10:39 PM
Re: Un-needed parts
 
Couldn't tell if you sold the mirrors, need the passenger side sport mirror if you still have it. Thanks.


All times are GMT -4. The time now is 01:58 PM.
Page 4 of 5 123 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com