FL Un-needed parts

[Hart_Rod]

**** NEW PARTS ADDED DAILY!!! ****

I just picked up a 72 4 x 4 Blazer project that was in proces of being converted to a 2WD. I'm going to continue to convert it to a 68 2WD, , so I have been sorting through the parts that I won't need . I'll add to the list as I go. Here's what I got so far:

*** Added parts: ***

68 steering wheel with horn button - $75 + shipping
Chrome vent windows, green glass, good seals - $100 + shipping
67 Chrome vent windows - $125

Complete 4 x 4 engine cradle - $50 shipped
small block stands - $30 + shipping
67 front fenders - very straight need minor rust repair - $100 for both (no shipping)
69-72 front fenders - very straight no rust - $150 for pair (no shipping)
Good set of complete 72 front parking lights (housings, pigtails, lenses) - $40 shipped
73-87 steering wheel - $40 shipped
71/72 bumper straight with nice chrome - $100 (no shipping)

Used hei + cap - $30 shipped
73 BB motor mounts - $60 shipped
4 x 4 blazer front and rear driveshafts $75 apiece or $125 for both + shipping
Dual electric fan setup (both checked good when powered up) - $30 + shipping
Th 350 auto shift linkage - $30 shipped



***** SOLD ****

Nice ac control panel with cables (no pitting) - ** SOLD Lynfield **
L/R A/C balls with center vent - ** Sold USMCcheyv **
Sport mirrors - ** SOLD BIGREDBEAST **(1 looks like a fairly new aftermarket, the other looks original (chrome is so so))
New a/c glove box - SOLD BIGREDBEAST **
Van tilt, b/u switch relocated - Sold
Original 69-72 black steering wheel, worn but no cracks - SOLD
CST 72 gas pedal, with cable and brackets - $45 shipped


Complete 72 inner and outer grill shell with hood latch, support bracket, side braces (L&R), emblem, and headlight trim. The plastic the egg carton has no cracks at all. The emblem is really nice. I don't think this is original, but it looks really good. The only bend in the outer trim is on the bottom and should be able to be straightened well enough that the bumper would hide it. ** Sold - Southern C10 **

69-72 core support minor rust below the battery box but no rust through - ** SOLD MAK71 **
NOS tail light trim, - ** SOLD KILLER71 **
Nice 4 x 4 auto high hump - ** SOLD GMGUY **
Tailgate handle relocator kit - ** SOLD Wancosc356 **

[Southern C10]

I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts.

[Hart_Rod]

Originally Posted by Southern C10

I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts.

Boardmember 71burb is coming down in the next week to get some parts. He lives north of Birmingham. I'm sure he wouldn't mind bringing it back with him. Pics of the fan and other parts. LMK.

r/

[wancosc356]

Hey Rob. Any pics of the tailgate handle relocator kit?

[Southern C10]

Originally Posted by Hart_Rod

Boardmember 71burb is coming down in the next week to get some parts. He lives north of Birmingham. I'm sure he wouldn't mind bringing it back with him. Pics of the fan and other parts. LMK.

r/

Rob. 71burb lives in Canada according to his profile. I will take the grille if I can get the guy you are talking about to pick it up.

Brian.

[Hart_Rod]

Originally Posted by wancosc356

Hey Rob. Any pics of the tailgate handle relocator kit?

Mike here's a couple pictures.

Originally Posted by Southern C10

Rob. 71burb lives in Canada according to his profile. I will take the grille if I can get the guy you are talking about to pick it up.

Brian.

Here's his profile:

http://www.67-72chevytrucks.com/vboa...er.php?u=41240

Jason is a cool guy and I'm sure he won't mind taking it back with him. I'm not sure when he's coming down, but it will be in the next week or two. If not, I'll be up in Montgomery within the next month.

[wancosc356]

Thanks man. Any idea what brand it is?

[Hart_Rod]

Originally Posted by wancosc356

Thanks man. Any idea what brand it is?

I'm not sure Mike. I tried googling the numbers on it, but got nothing back. The main panel is galvanized and the whole setup looks solid.

R/

[wancosc356]

Originally Posted by Hart_Rod

I'm not sure Mike. I tried googling the numbers on it, but got nothing back. The main panel is galvanized and the whole setup looks solid.

R/

Oh ok. Is the handle and mechanism steel or plastic?

[Southern C10]

Rob,

I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them.

Brian.

[Hart_Rod]

Originally Posted by wancosc356

Oh ok. Is the handle and mechanism steel or plastic?

Handle is cast metal, not plastic. Everthing else is steel.

Originally Posted by Southern C10

Rob,

I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them.

Brian.

Sounds good.

[nplocoman]

I am interested in the fan and the hei distributor. Can you get a quote on shipping to 69101? Does the hei have a coil? Also do you have any plug wires to go with it?

[wancosc356]

Originally Posted by Hart_Rod

Handle is cast metal, not plastic. Everthing else is steel.

I'll take it. PM sent.

[Duncan and son]

Rob, do you need a factory 2wd frame? We bought the one in okla.
Paul and Jason

[LUCKTRUCK]

I'll take the auto shift linkage if it is complete from column to trans. and for 4wd.

[Hart_Rod]

Originally Posted by nplocoman

I am interested in the fan and the hei distributor. Can you get a quote on shipping to 69101? Does the hei have a coil? Also do you have any plug wires to go with it?

No wires, just the distributor, cap and coil.

Edit: I just noticed that the electric fan shroud has a couple of breaks on the shield. I think these can be easily repaired. I will do both for $80 total shipped.

R/

Originally Posted by wancosc356

I'll take it. PM sent.

PM sent.

Originally Posted by Duncan and son

Rob, do you need a factory 2wd frame? We bought the one in okla.
Paul and Jason

PM sent.

Originally Posted by LUCKTRUCK

I'll take the auto shift linkage if it is complete from column to trans. and for 4wd.

Here's a picture of what I have.

[wancosc356]

Payment send for tailgate handle relocator kit. Thanks man.

[nplocoman]

I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

[BigRed Beast]

I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors?

[Hart_Rod]

Originally Posted by wancosc356

Payment send for tailgate handle relocator kit. Thanks man.

Your welcome!

Originally Posted by nplocoman

I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

I'll go $70 shipped if you change your mind.

Originally Posted by BigRed Beast

I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors?

Thanks. What style?

[Southern C10]

Rob,

Jason replied and he will pick up the grille. PM me your paypal info.

Brian.

[BigRed Beast]

Hi, Rob...

Exterior mirrors...I have a '72 Blazer CST. Doors were punched for the smaller, rectangular mirrors. But, I'd be happy with the smaller tripod mirrors too...whatcha got?

Dave

[Hart_Rod]

Originally Posted by Southern C10

Rob,

Jason replied and he will pick up the grille. PM me your paypal info.

Brian.

Cool. PM sent.

Originally Posted by BigRed Beast

Hi, Rob...

Exterior mirrors...I have a '72 Blazer CST. Doors were punched for the smaller, rectangular mirrors. But, I'd be happy with the smaller tripod mirrors too...whatcha got?

Dave

Let me see what I have.

R/

[64GMCHorsepower]

Rob, can you give me the measurments on the fans please....

[Southern C10]

Rob,

Payment sent for grille.

Brian.