The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 17 123 4 5678914 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   My 1952 truck. (https://67-72chevytrucks.com/vboard/showthread.php?t=478787)

SSABMUD 01-29-2013 10:10 PM
Re: My 1952 truck.
 
1 Attachment(s)
Got the latches done also and push button handles on 49 doors.
Posted via Mobile Device
Posted via Mobile Device

SSABMUD 01-29-2013 10:12 PM
Re: My 1952 truck.
 
1 Attachment(s)
Posted via Mobile Device

SSABMUD 01-29-2013 10:14 PM
Re: My 1952 truck.
 
1 Attachment(s)
Will get shinier ones after paint.
Posted via Mobile Device

SSABMUD 01-29-2013 10:16 PM
Re: My 1952 truck.
 
1 Attachment(s)
Getting very close to taking all apart and blasting that frame, boxing it, and getting it coated.
Posted via Mobile Device

Killick 01-29-2013 11:19 PM
Re: My 1952 truck.
 
Looking sharp! May have to come up to RD just to listen to it running :)

SSABMUD 01-30-2013 12:08 AM
Re: My 1952 truck.
 
Quote:
Originally Posted by Killick (Post 5854929)
Looking sharp! May have to come up to RD just to listen to it running :)
You bet.
Posted via Mobile Device

xpickup 01-30-2013 09:30 AM
Re: My 1952 truck.
 
SSABMUD, Truck is coming along great. I love all the sheet metal mods. Great job.

Shannon

SSABMUD 01-31-2013 10:12 PM
Re: My 1952 truck.
 
1 Attachment(s)
Posted via Mobile Device
Stake pockets are done.
Posted via Mobile Device

SSABMUD 01-31-2013 10:13 PM
Re: My 1952 truck.
 
1 Attachment(s)
Another angle.
Posted via Mobile Device
Posted via Mobile Device

SSABMUD 01-31-2013 10:15 PM
Re: My 1952 truck.
 
1 Attachment(s)
Rear do over is finished. Looks much better.
Posted via Mobile Device
Posted via Mobile Device

SSABMUD 01-31-2013 10:17 PM
Re: My 1952 truck.
 
1 Attachment(s)
Next on list....hood/cowl or interior?
Posted via Mobile Device
Posted via Mobile Device

99 to Life 01-31-2013 10:19 PM
Re: My 1952 truck.
 
I luv the vent, don't axe it pleasssseeeeeeeee

SSABMUD 01-31-2013 11:42 PM
Re: My 1952 truck.
 
Quote:
Originally Posted by 99 to Life (Post 5859323)
I luv the vent, don't axe it pleasssseeeeeeeee
I am on the fence about it. I may have no choice because of my wiper kit.
Posted via Mobile Device

BlueJeep 01-31-2013 11:53 PM
Re: My 1952 truck.
 
What wiper kit did you buy? I have the Brother's replacement electric motor and no issues with keeping the cowl vent. Vintage Air, however, is really close. I'm making my own brackets now to mount it where I want it.

SSABMUD 02-01-2013 10:02 AM
Re: My 1952 truck.
 
Quote:
Originally Posted by BlueJeep (Post 5859566)
What wiper kit did you buy? I have the Brother's replacement electric motor and no issues with keeping the cowl vent. Vintage Air, however, is really close. I'm making my own brackets now to mount it where I want it.
Newport Engineering kit.
Posted via Mobile Device

SSABMUD 02-16-2013 11:45 PM
Re: My 1952 truck.
 
1 Attachment(s)
Well, I started ony console again. Got quite a bit of it roughed in today. Little more foam work then fibreglass....I hate fibreglass.
Posted via Mobile Device

SSABMUD 02-16-2013 11:46 PM
Re: My 1952 truck.
 
1 Attachment(s)
Posted via Mobile Device

SSABMUD 02-16-2013 11:49 PM
Re: My 1952 truck.
 
1 Attachment(s)
Love this foam.
Posted via Mobile Device

shadow1967 02-17-2013 12:25 AM
Re: My 1952 truck.
 
Great job! Now hurry up with the concole so I can get ideas for mine.

SSABMUD 02-17-2013 12:35 AM
Re: My 1952 truck.
 
I am finally working on it again Shadow. Have to get some epoxy resin before I can start sticking it on. Need some lights and the stereo head also. Hate fibreglass. Did I say that already?
Posted via Mobile Device

Wheelie 02-17-2013 10:12 AM
Re: My 1952 truck.
 
Console looks good. Is the insulation for template use? Or are you going back with mdf board?

SSABMUD 02-17-2013 11:33 AM
Re: My 1952 truck.
 
Quote:
Originally Posted by Wheelie (Post 5894065)
Console looks good. Is the insulation for template use? Or are you going back with mdf board?
I'm going to fibreglass right over it once I sand it to final shape. So easy to work with the foam and way less mess. Sands super fast.
Posted via Mobile Device

SSABMUD 02-17-2013 09:08 PM
Re: My 1952 truck.
 
1 Attachment(s)
Posted via Mobile Device

SSABMUD 02-17-2013 09:11 PM
Re: My 1952 truck.
 
1 Attachment(s)
Fit up gear indicator.
Posted via Mobile Device

SSABMUD 02-17-2013 09:14 PM
Re: My 1952 truck.
 
Going to add a shallow tray in front of shifter, then tape it up and start fibreglassing.
Posted via Mobile Device


All times are GMT -4. The time now is 02:00 PM.
Page 4 of 17 123 4 5678914 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com