Re: Project NiteMare-1970 C10 LWB build
 

Never thought this day would come...crap! Lol. Assembled and onto the box tomorrow!

Re: Project NiteMare-1970 C10 LWB build
 

.... and so it starts

Re: Project NiteMare-1970 C10 LWB build
 

Started stripping paint of the box sides... Encountered about a half inch of glass/filler. Previous tail end repair was brazed together. Lot of warping. Looks like I'll be slicing a piece of the parts truck.

Re: Project NiteMare-1970 C10 LWB build
 

Another one. Can't get at the back side to dolly it out... Shy of cutting it.

Re: Project NiteMare-1970 C10 LWB build
 

any progress on the bed Molberg?

Re: Project NiteMare-1970 C10 LWB build
 

Thought I'd update this thing while I'm havin a beer and starin at it again.. Box all tore apart and stripped of paint. Even had a helper for an afternoon. (what are we gonna do today Dad?) The inner box support rails were rotten. (the part that rests on the wood floor) Dug out the metal brake and bent up some repair pieces.

Re: Project NiteMare-1970 C10 LWB build
 

Drilled holes through inner boxside and plug welded repair panels.. as well as stitched along inside of 90 deg. bend. The holes for tail lights/reverse lights were filled... as well as the holes for the stake pockets

Re: Project NiteMare-1970 C10 LWB build
 

Those steel flowers I made for wife to keep me from buyin anymore?... Wife voluntold me to make a set for a wedding present for her friend. Just buy them. This knocked a couple days off my truck time..

Re: Project NiteMare-1970 C10 LWB build
 

i gotta know what your plan is for the taillites?

Re: Project NiteMare-1970 C10 LWB build
 

Back to the truck again.. cut a tail bed corner off my parts truck to replace the damaged one I found covered in filler while stripping paint. It was damaged as well on the lower side. So some is replacement... some is fabbed up.

Re: Project NiteMare-1970 C10 LWB build
 

Hey zicc.. I've made an LED light bar I'm flush mounting in the rollpan... below the tail gate. 1" x 64" wide made from 4 individual multi LED light bars. Will appear as a continous light bar... full width with park lights on. But using sequencial flasher setup for signals..( inner flashes.. outer flashes.. etc)

Re: Project NiteMare-1970 C10 LWB build
 

Had some steel repair to do behind the wheel openings.. the goodmark repair panel I got my hands on fit like absolute crap. What a piece of garbage. Rear indent below tail lights non existent... and 45 deg. bend along the wheel opening not to be found either. I used pieces of it... but it took lots of reworking to make anything of it.. pittiful really..

Re: Project NiteMare-1970 C10 LWB build
 

very nice keep the pics coming ...your work is awesome

Re: Project NiteMare-1970 C10 LWB build
 

Thanks zicc!..
I won't take it to heart if anyone calls me mentally challenged for this one.. lol The tailgate I'm using was bowed.. like 1.5". There was only one way I could see to really get it straight again... so I split it. Drilled the spot welds.. zip cut along the top.. and split it all apart. After several hours with a hammer, block and a dolly, I think it's useable now. Rust removed/sealed from the inside.. and welded back together. Finished fabbing the cover plate for the reverse handle setup I made

Re: Project NiteMare-1970 C10 LWB build
 

I tack welded the gate skins to cross sills from the truck bed.. after verifying straight/true. This kept everything true as I welded it back together. Just finishing up the bodywork on the gate ... should be spraying some primer in the next day or 2. Box assembly will follow.. and my lightbar/rollpan setup.

Re: Project NiteMare-1970 C10 LWB build
 

looking awesome! i still need to strip and fit up my bed. I'm jealous of your heated shop it would make prrojects and running my own weld shop that much easier!

Re: Project NiteMare-1970 C10 LWB build
 

Thanks..Lol... it'll come brother. I've spent lots of years working on gravel driveways and in unheated barns before I built this one

Re: Project NiteMare-1970 C10 LWB build
 

I really enjoy your thread. Your grill looks different, yet slightly familar, more modern, (which usually bothers me,) yet old style. Really like it. I to have been looking for that portion below the taillight where someone has hit mine. I have discovered all the replacements are flat, and dont have the body lines. Why wouldnt they make a proper patch repair? That makes no sense to me? Keep up the good work.

Re: Project NiteMare-1970 C10 LWB build
 

Thanks... I haven't compared a triplus panel yet. Usually they fit ok. I figured this patch panel was for the wrong year at first.... Nothing lined up at all.

Re: Project NiteMare-1970 C10 LWB build
 

bodywork complete.. seam sealer on and just sprayed with hi builds. (filled antennae hole in cowl cover as well)

Re: Project NiteMare-1970 C10 LWB build
 

Nice work.

Re: Project NiteMare-1970 C10 LWB build
 

Thank you..

Re: Project NiteMare-1970 C10 LWB build
 

Lookin good!

Re: Project NiteMare-1970 C10 LWB build
 

Your craftsmanship is really impressive. Some of the mods you did such as the skull in the console and the grill are not necessarily something I would do to my car, but you did a hell of a job on all of them. Real nice work.

Re: Project NiteMare-1970 C10 LWB build
 

Thanks Charles... I just noticed your reply. Thought I'd add a pic to my thread of one I've completed... And the next one "in waiting".

Re: Project NiteMare-1970 C10 LWB build
 

And that's what u get for loading pics from a phone. Lol

Re: Project NiteMare-1970 C10 LWB build
 

Maybe a moderator will fix that for me...?

Re: Project NiteMare-1970 C10 LWB build
 

Your work is awesome, you a bodyman by trade? Or where did you learn from?

Re: Project NiteMare-1970 C10 LWB build
 

Another update... built a wood frame to enable box assembly. The frame rests on a cab cart so I can roll it around. The LED tail light assembly I made is 4 individual lights, fiberglassed to 1" x 60" plate(1/8" thick) 5/16" rod welded to backside for mounting. Some 18g was broke into a channel shape to act as a recessed holder for the light. Holes drilled through it for lightbar mounting bolts.. and end caps fabbed up

Re: Project NiteMare-1970 C10 LWB build
 

To make room for the bar assembly within the roll pan.. the license plate area had to be reworked. New holes cut for license plate lights too.

Re: Project NiteMare-1970 C10 LWB build
 

Gave them a test fire before installing the roll pan. They are a stop/turn/tail.(right signal on in one pic)

Re: Project NiteMare-1970 C10 LWB build
 

Rollpan tacked in.. boxsides and tailgate assembled. Onto some bodywork this week. Gotta figure out the reverse light thing yet..

Re: Project NiteMare-1970 C10 LWB build
 

awesome

Re: Project NiteMare-1970 C10 LWB build
 

Thanks zicc.... any ideas for backup lights? lol nothin comin to me yet.

Re: Project NiteMare-1970 C10 LWB build
 

Nice work!

Re: Project NiteMare-1970 C10 LWB build
 

cool :metal:
always look forward to your posts

Re: Project NiteMare-1970 C10 LWB build
 

Thanks for the comments guys...

Re: Project NiteMare-1970 C10 LWB build
 

Looks like you have enough space on each end of brake lights to insert small white lights. Not duable?

Re: Project NiteMare-1970 C10 LWB build
 

Ya... That was the plan. Tryin to source a light that fits it all . I'm shaving the square marker lights off as well. I'm goin to fit some small bullet style markers in off a '68 charger/monaco. Always liked them.

Re: Project NiteMare-1970 C10 LWB build
 

Find a couple 800 lumen flash lights and gut them, and throw an extra power toggle switch to them to, it might get people to stop tailgating you someday if you flip the switch on them. :)