Re: How about some pics of custom stereos
3 Attachment(s)
heres my fronts
|
Re: How about some pics of custom stereos
I posted in June last year and have updated since then. I moved up to a Dual Hifonics and am going to be updating to a 5 Farad Power Cap so the headlights donīt dim themselves. ;-)
A guy over here made a German set of playing cards for fun and used the cars that show up for our "Saturday Night Cruises" here in Nuernberg. He gave each person a nickname and thanked them in the leaflet that he put in the case with them. Check out the names. Look for Seanīs C10. http://img526.imageshack.us/img526/2034/dsc0018mh.jpg :-) Quote:
|
Re: How about some pics of custom stereos
5 Attachment(s)
87' C10
Just Installed |
Re: How about some pics of custom stereos
2 Attachment(s)
just got some temporary tunes rolling from pep boys. :metal: My little girl was so happy withe the skulls!
If your interested in the custom built boxes that were in there before we can work a deal. :haha: Attachment 837606 Attachment 837607 |
Re: How about some pics of custom stereos
any ideas out there for square crew cabs? love the 4 - JL 8's downfiring behind seat of regular cab...
|
58 TRUK stereo install
thought i'd post my 58 chevy truk stereo install.
what started out as a simple 4'' metal dash fascia turned into this when i logged onto fiberglassforums.com http://i306.photobucket.com/albums/n...0529091519.jpg http://i306.photobucket.com/albums/n...0529091520.jpg jvc single din dvd receiver, 4 sets of arc audio 4.5 component speakers, 1 arc audio 10'' sub, arc audio 4x400 watt speaker amp, arc audio 600 watt sub amp, ebay 7'' headrest monitor and a radio shack antenna (under truck). amps are mounted behind the driver seat, battery and sub behind the pass seat. kick panels http://i306.photobucket.com/albums/n...0610091505.jpg http://i306.photobucket.com/albums/n...0610091517.jpg door panels http://i306.photobucket.com/albums/n...0518011810.jpg the gas tank on my 58 was behind the seat, now relocated to the frame. while this is for a 55-59 cab, the idea/design would work in any truck. this enclosure is for battery, sub woofer and 2 amps, plus it blends into my armrest/console. at this point it would fit any 55-59 truck (fleece only, not glassed yet) http://i306.photobucket.com/albums/n...erior3-1-1.jpg primer contrast shows where cab ends and enclosure starts. both amps are stacked in this hole. http://i306.photobucket.com/albums/n...re/subbox4.jpg http://i306.photobucket.com/albums/n...re/subbox2.jpg all that work only to cover it up with the seats :D http://i306.photobucket.com/albums/n...0930091702.jpg |
Re: How about some pics of custom stereos
Ogre-
Do you have the part number for the antenna that you bought from "the shack". I thought about doing the same thing. Do you pick up good radio reception with it under the truck? Let me know Thanks Marc |
Re: How about some pics of custom stereos
holy crap! great job. Did you do this yourself or send it to a shop?
|
Re: How about some pics of custom stereos
nevermind- just saw your link- great work Ogre!
|
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
3 Attachment(s)
mines JL 13TW5 with JL 500/1 custom box man this thing slams and gets low I was very surpired you get what you pay for........
|
Re: How about some pics of custom stereos
5 Attachment(s)
Stock was AM ...went Pioneer in the 78
prob gona leave the fronts but planning smaller boxes for the back,for ashtray area |
Re: How about some pics of custom stereos
2 Attachment(s)
79 stock in both was AM only
looking for an early 80s amfm 4 channel |
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
5 Attachment(s)
4 pioneer speakers-250watts max each
2 kicker 12 inch L7 subs- 1500watts max, 750 rms each 1 boss 800.4 amp for speakers 2 kicker 750.1 amps-one for each sub pioneer avh-dvd4000 headunit 0/1 gauge wire to distribution block, 4 gauge wire goes to each amp 4 gauge ground all around optima yellow top battery nothing too custom, just did what i could with the budget i had. can still feel the bass in the back of my seat with the top off wanting to make custom kick panels out of fiberglass for 2 more speakers. maybe sometime down the line. |
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
Quote:
They are more expensive than other enclosures, but as you can see by the pictures they fit perfect and match my interior very well... for a clean look.. and not taken anything away from the truck... |
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
Quote:
My E-Brake has always engaged at the top of the pedal very well, so I'm sure if anyone's has slack or it's at the bottom of the pedal when it engage's then you will have to modify. The quality of the mids and highs work great in our style trucks, and worth all efforts if you are planning on keeping it! |
Re: How about some pics of custom stereos
2 Attachment(s)
Here's clearance picture:
|
Re: How about some pics of custom stereos
4 Attachment(s)
so heres mine, 1987 gmc v3500 std cab. 2 kenwood kfc-w1200f shallow mount 12's in a custom box, 2 rockford power 6x9's in custom corner cabnets, four 3.5 rockfords in the dash, kicker zx700.5 under the seat, and a kenwood head unit. as nice as the flashy custom boxes and molded fiberglass boxes and kick panel speakers are, ive never been a huge fan of having that much flashy stuff in my trucks, clean and simple are how i like it. this system rocks pretty good, for just being a simple setup, best in my town in a standard cab. itl make your ears hurt pretty bad if you push it that far. i like to put my seat back and not be able to see anything. the first pic is of the amp when it was being installeed, because theres no way to get a picture now lol
|
Re: How about some pics of custom stereos
Quote:
|
Re: How about some pics of custom stereos
Thanks!
|
Re: How about some pics of custom stereos
cmax87, How much did you pay for the sub box if you don't mind me asking? It looks awesome. Pretty much exactly what I want to do. Or possibly some of the measurements of it. Any help is appreciated.
|
All times are GMT -4. The time now is 07:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com