Re: Parting out 69 GMC 1/2 ton truck
 

I can do $20 to your door on the whole thing. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Jenn: Those aren't the pieces i'm looking for. I need the 2 small black pieces approx 1/2" long & 5/16" wide w/3/16" hole in it & this is what holds the metal
vent piece to the plastic chrome frame. I don't need the black part that the hoses attatch to. The one i have is fine. I just need these 2 small black plastic parts that hold the vent grate in place. The plastic piece about dead center of the pic i'm posting. Jamie 71 :gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

I'm looking for a passenger side taillight patch if you're cutting up the bed side. thanks

Re: Parting out 69 GMC 1/2 ton truck
 

Hi Jenn,
Regarding the vent door & actuator assembly, I'm pretty much sure I'll take it. I'll send you a PM with my address etc. Would still like one more shot of the back side of that bracket when you get a chance.

Thanks.

Re: Parting out 69 GMC 1/2 ton truck
 

In what condition is the diverter box under the dash? Also do you have the air vent that goes in the engine compartment/top of the cowl? Also a/c vacuum canister.

Re: Parting out 69 GMC 1/2 ton truck
 

hey go ahead and pass the grill onto next person in line. sorry just dont need one right now. thanks for your time

Re: Parting out 69 GMC 1/2 ton truck
 

got the dash pad today. looks great. thanks, Woody

Re: Parting out 69 GMC 1/2 ton truck
 

is it an a/c truck?

Re: Parting out 69 GMC 1/2 ton truck
 

grill is sold

Re: Parting out 69 GMC 1/2 ton truck
 

speedracer
i have bed paches. what are you looking for?

Re: Parting out 69 GMC 1/2 ton truck
 

This is an ac truck.

Re: Parting out 69 GMC 1/2 ton truck
 

Do you still have the shift indicator lens that mounts to the top of the steering column. I just need the clear part with P, R, N, D, L, L

Re: Parting out 69 GMC 1/2 ton truck
 

I will check and see if ihave a indcator.

Re: Parting out 69 GMC 1/2 ton truck
 

I'll take the rear window trim and front window trim. pm me with price and shipping to 77578.

Thanks,

Kev.

Re: Parting out 69 GMC 1/2 ton truck
 

sorry the rear window trim, thought it had trim on the windshield lol....

Re: Parting out 69 GMC 1/2 ton truck
 

I would be interested in the shift indicator. Price? Picture? Thanks!

Re: Parting out 69 GMC 1/2 ton truck
 

Anything on the pass inner fender?
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

I have to ask even though shipping (to 29651) is likely crazy - how much for the leaf springs?

Thanks
-Brian

Re: Parting out 69 GMC 1/2 ton truck
 

I will see if I have some nice windshield trim. I will get back to you, the worst part if the top windshield trim, being so long, But I can get you a quote. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

I am not selling the shift indicator by it self. I am selling the column as a WHOLE. $100 shipped. thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Let me see if I have a decent one around here. Is it for a NON-tile coumn? thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Non tilt. Thanks.
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

Ok, so there are 2 styles for various years to choose from. You can see in the pics the defference. Just let me know if you have the plastic housing or metal? I could do $10 shipped on EITHER lens. thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Jenn,

I have a nice front windshield trim mine has two dings on the lower piece and the dings are by the lip that attaches into the rubber seal, so they are in a bad area, although not very noticable I would still like to see if I can get atleast the lower piece that is in great shape with no dings and the rear trim as mine was ruined by the po, they used self tapping screws to secure it to the slider back window. Please let me know what ya got and how much including shipping to 77578. On a side note I bought a wood bed front panel from you on ebay that is truly rust free awhile back, although it has some minor dents in it I'm very pleased.....

God Bless and thanks again!

Kev.
:chevy:

Re: Parting out 69 GMC 1/2 ton truck
 

Hey Kev,
You must be talking about the teal green 67-68 color front bed pan. That was a very nice clean piece. I am glad you are happy with it. I do have trim here that is not dented, although it will need to be polished there are scretches, nothing to deep, just surface stuff from being in my trim barrel. I am working on getting some better pricing from UPS, but I might have to go postal since the trim is so light in weight. I will let you know tomorrow. thanks for the kind words. Jenn