Re: Project NiteMare-1970 C10 LWB build
 

Huh, I thought this build was completed. I'm rarely right :lol:

Re: Project NiteMare-1970 C10 LWB build
 

Lol... I havent fired the engine yet. Long ways to go yet bro

Re: Project NiteMare-1970 C10 LWB build
 

....... and filled some orders for the wife

Re: Project NiteMare-1970 C10 LWB build
 

Add some customizing ability and an online store-front, and you're in business. Cool.

Re: Project NiteMare-1970 C10 LWB build
 

I have never seen an adapter like that, cant believe somebody even bothered designing one. :)

Re: Project NiteMare-1970 C10 LWB build
 

Beer, update while starin at truck again. Nova tucked away until nitemare finished. Wife pushin me to finish truck so I can start on her nova.... well played Molberg... well played. Had to fab upper rad supports. Long story. Fabbed up some side brackets for the windstar fans. Fans in and tested. Santa sent me some parts on the bus this week. An adjustable Derale elec fan control module was included. Holley blue elec pump/reg assembly as well.

Re: Project NiteMare-1970 C10 LWB build
 

Fuel regulator installed. Ran stainless lines for carb/nitrous solenoid. Nitrous throttle trigger, fuel/nitrous solenoids in place. Picked up an edelbrock elec choke kit for my carb

Re: Project NiteMare-1970 C10 LWB build
 

and these... autometer retro

Re: Project NiteMare-1970 C10 LWB build
 

Nice progress!

Re: Project NiteMare-1970 C10 LWB build
 

Nice fab work, looks great!

Re: Project NiteMare-1970 C10 LWB build
 

Earth to Molberg, come in Molberg. Got this beast fired up yet?

Re: Project NiteMare-1970 C10 LWB build
 

Lol.... Molberg has been hauled away to a planet where you get neutered and made a slave for your wife's projects. (we're selling them)

Havent had the tarp off the truck in a week. On a good note... picked up a Lincoln plasma cutter and some line lock for the truck.

Re: Project NiteMare-1970 C10 LWB build
 

Any updates on the truck and nova?

Re: Project NiteMare-1970 C10 LWB build
 

Updates?

Re: Project NiteMare-1970 C10 LWB build
 

I havent got much... peeled the cover back on it for the first time a couple days ago. Yikes. Dust from the plasma cutter. Had to upgrade my plasma. The lincoln would stop working. (mother board failure) apparently common with Lincolns...? Returned it and came home with a Miller Xtreme 625. Real impressed so far. Built a website for this flower/memorial thing I'm messing with. Xmas orders all done... should be able to get some truck time again now.

https://sites.google.com/site/wheref...-e-w-p-i-n-k-y

Re: Project NiteMare-1970 C10 LWB build
 

Way cool! It's all totally rad but I love the copper stuff. The painted rose is awesome too. Nice work Molberg!!!

Re: Project NiteMare-1970 C10 LWB build
 

awe.... thanks brother

Re: Project NiteMare-1970 C10 LWB build
 

Soooo.... Back at it. Quit smokin almost 3 months now after 22 years of it. (Hence the break from the truck). Brutal. Some engine wiring to test the stress/cravings. Not givin up beer. Nope. Good to be back.

Re: Project NiteMare-1970 C10 LWB build
 

Congrats! I quit cold turkey back in 86 and the 3rd week was just a killer! made it 2 years then a scary rough night in the Puget Sound straits in a 30' bow picker led me to smoke another, slowly back to a pack a day then quit again cold turkey back in 90. I have been smoke free every since! Hopefully like me you will begin to hate the smell of second hand smoke and never go back.

I still like my beer on occasion too. :)

Re: Project NiteMare-1970 C10 LWB build
 

Congrats on both fronts Molberg! I'm heavy smoker, tried a few different times. How'd you do it? When we gonna hear the truck?

Re: Project NiteMare-1970 C10 LWB build
 

I'm doin the e-cig/vaping thing. Easiest I've had it as far as quitting goes. Still get some nicotine... Keeps the hissy fits at bay. Lol. I could start again quite easily... Doesn't stink yet. Ugh. I was well over a pack a day when workin in the shop. (And they're $16 a pack up here!)

Re: Project NiteMare-1970 C10 LWB build
 

ok man, we are all waiting for you to finish this thing.

Re: Project NiteMare-1970 C10 LWB build
 

Thanks!... I'm gettin pressure from the wife as well. Wants her Nova in here. I've been on vacation for a couple of weeks... And logged a schwack of hours on the ole girl. I'll dig out the laptop and some beer tonight and throw some more pics up. Should be firing it up in the next couple of weeks. Tryin to sort out my drive shaft dilemma at the moment.

Re: Project NiteMare-1970 C10 LWB build
 

What's the dilema?

Re: Project NiteMare-1970 C10 LWB build
 

Sooo....a few updates, a few beer again. Finally got my hands on a dipstick tube and flexplate cover for my TH400. Yup. Almost a year to find them. Unreal. Used to be everywhere... gettin harder to find. Went with a Holley blue fuel pump/reg set-up, wiring complete and tested. (built the harness), Derale engine temp controller installed, Hurst line lock plumbed/wired in. Tested and works, robbed the dual horns from my '63 caddy and wired in, had to make up a set of power steering hoses. Pump from an '81 (uses o-rings) and steering box uses double flare fittings... ugh. Hood gauges wired up, mini gear drive starter in and wheels engine over like crazy, and spent an evening hand polishing over spray off inner fenders. Maguires medium cut cleaner rips it off like nothin i"ve seen.

Re: Project NiteMare-1970 C10 LWB build
 

Made a small switch panel for elec fan bypass switches, line lock, fuel pump, and nitrous! Windshield washer from an early 90's truck installed.. spent 2 days makin tranny cooler lines. Was fighting with it kinking, etc. Noticed it was squared off. ugh

Re: Project NiteMare-1970 C10 LWB build
 

Good to see you back at it!

Re: Project NiteMare-1970 C10 LWB build
 

Thanks! I have never seen an entire roll of tubing squared like that before. It would kink using tubing benders. Forget tryin to get a nice double flare in it. Unreal. Spent an hour or two under the truck on a creeper with a set of wrenches, lookin for loose bolts, clamps, etc, before I fire it up. I'm glad I did that. Lol. Driveshaft and exhaust are next. The tranny has a fixed rear yoke... Need a shaft built with an integral slip spline shaft in it I guess. (Otherwise no slip in driveline at all)

Re: Project NiteMare-1970 C10 LWB build
 

That switch box looks awesome! How is that swirl look achieved?

Re: Project NiteMare-1970 C10 LWB build
 

Hey thanks! It's called metal jeweling. Do it with some of the other artsy stuff I waste time on. Real easy to do. Some use a piece of aluminum dowel in a drill press, I used a mini 3m die grinder pad (course) in the drill press. Mark a grid on metal so swirls intersect with eachother. Lots of different techniques or different looks. Videos online if u search metal jeweling.

Re: Project NiteMare-1970 C10 LWB build
 

All great stuff Molberg! Awesome work. Looking forward to the next update AND the Nova.

Re: Project NiteMare-1970 C10 LWB build
 

Mud flap time. I kinda like em. I live in the sticks and have miles of dirt road to get to a highway... soooo, flaps it is. Wanted somethin different again. Scratched my head for a bit and came up with this. These are my old fender badges, and a set from my parts truck. Not show quality, but good enough for mud flaps. They're held on to fenders with the weak trim nuts. Wanted something stronger. Measured the studs, and a 10-24 die cuts perfect threads in these. Drilled holes in flaps, secured with locknuts, and slammed them on the truck. I also ordered flowmaster #815937 3" exhaust kit today... and a set of 3" Flowmaster super 10's.... Yup. Super 10's.

Re: Project NiteMare-1970 C10 LWB build
 

Thanks brother! Feels weird being this close to the finish line after 2 1/2 years. Oh.... the pic of the bag? ya.... thats all the receipts. Kids were pissin around in the shop last night. Told them to practice their math skills and add it up for me. (keep them occupied)... ouch.

Re: Project NiteMare-1970 C10 LWB build
 

Flaps will be a cool touch. My boy had the 10's on his S10. Got an anonymous letter from a neighbor.

https://www.youtube.com/watch?v=Sf-yQvmeT28

I'm just finishing my 2-1/2" exhaust and have 10's installed :) Anxious to hear yours!

Re: Project NiteMare-1970 C10 LWB build
 

Another good one....

https://www.youtube.com/watch?v=TG_ru7vFe-Y

Re: Project NiteMare-1970 C10 LWB build
 

Hahahahah!... my closest neighbour is a mile away. Might still get a "letter" with 10's though. Lol

Re: Project NiteMare-1970 C10 LWB build
 

Lol!.... awesome. lol..( uh oh... wifey's home)

Re: Project NiteMare-1970 C10 LWB build
 

That's what it's called.

Not usually a huge fan of flaps, but you have to keep that black paint protected. Those flaps look great on that truck.

Re: Project NiteMare-1970 C10 LWB build
 

still waitin on a web page where your sellin some of that artsy stuff.. don't I remember some copper roses a while back?

Re: Project NiteMare-1970 C10 LWB build
 

Nice Work!!!