NOS bed wood - Central PA
 

1960-1972 Long or Short Step NOS Bed Wood w/four extra boards (two fleet wheel well boards and two step outer skinny boards) You could cut the 103" boards down and trim them to work on a short fleet...

Whats included:
4 ea. 103" x 7 7/16" boards (longhorn)
2 ea. 97" x 7 7/16" wheel well boards (long bed or short bed)
4 ea. 97" x 3 1/8" outer boards (long or short stepsides)
2 ea. 97" x 5 7/16" center boards (long or short bed fleet or step)

More info @
http://www.gmcpauls.com/47-72_BedWood_Info.htm

OK, here it is... For those hard core NOS guys. All main boards are 103" (longhorn anyone?) and the skinny boards and wheel well area boards are 97". Only one skinny board has any type of cracking noticed in the pic below but it won't affect fuction and adds to the character.

I think that GM expected you to cut the boards to fit your type of bed. All holes are drilled for the sides and wheel wells. There are two boards stacked at the top of the first pic. Sorry it's a little dirty, I didn't want to power wash it though!



$450 + shipping

Anyone ever seen NOS wood?

http://i211.photobucket.com/albums/b...4/IMG_3017.jpg
http://i211.photobucket.com/albums/b...4/IMG_3020.jpg
http://i211.photobucket.com/albums/b...4/IMG_3028.jpg
http://i211.photobucket.com/albums/b...4/IMG_3027.jpg
http://i211.photobucket.com/albums/b...4/IMG_3021.jpg
http://i211.photobucket.com/albums/b...4/IMG_3022.jpg
http://i211.photobucket.com/albums/b...4/IMG_3023.jpg

Re: NOS bed wood - Central PA
 

my offer stands, cash in hand.
im on vacation right now so i can get it done asap

Re: NOS bed wood - Central PA
 

Thanks John... I should have gotten around to this earlier then the other John (sourkraut) could have brought it over tomorrow...

I'm working on a deal for some plain pine, if that works out then this set is yours... thanks

How long is vacation?

Re: NOS bed wood - Central PA
 

till the 5th

Re: NOS bed wood - Central PA
 

Don't pressure wash it, you might lose the parts stickers!! That is a really cool find, I would have liked to have known about them several years ago for the BB truck. Nice, very Nice.

Re: NOS bed wood - Central PA
 

thanks, they came with my truck when the original owners son found them in his dads shop (his dad had passed away so he was selling items) and they lived in Newburgh,NY, same place these were sold, same place my truck was from... good history...

Re: NOS bed wood - Central PA
 

OMG... that is truly a once in a lifetime purchase. If nothing else, thanks for posting this. :D

Re: NOS bed wood - Central PA
 

Interested if John would happen to pass. I have a set installed in my 72 GMC and the stickers are still showing on bottom side. NEat find. Thanks for the layout, Mark

Re: NOS bed wood - Central PA
 

Talk about rare,that is the 1st set i've ever seen.

Re: NOS bed wood - Central PA
 

Houston we have a problem...

Edit:

This is a 1960-1972 short or long step wood set with four extra boards. It's missing the outer 6 3/8" boards for a fleet (per GMCPauls website)

http://www.gmcpauls.com/47-72_BedWood_Info.htm

http://i211.photobucket.com/albums/b...4/IMG_3028.jpg
http://i211.photobucket.com/albums/b...4/IMG_3027.jpg

Re: NOS bed wood - Central PA
 

what is the width of the ones circled in red
and what are the ones circled in blue

i still want it
http://img.photobucket.com/albums/v6...r/IMG_3027.jpg

Re: NOS bed wood - Central PA
 

They are 3 1/8" wide for the one's circled both a matching outer set for a stepbed.

Re: NOS bed wood - Central PA
 

the ones circled in blue are the same as the ones in red.

the blues are an extra pair?

Re: NOS bed wood - Central PA
 

Mike
I would love to have this for either one of my 67 frame off restorations if we can figure some way to ship these. Anyone have any ideas to get this down Interstate 80 to Nebraska or a way to ship 103" boards?
Mark

Re: NOS bed wood - Central PA
 

Mark

I sent you a PM about shipping options. Let me know if you want to pursue that route.

Re: NOS bed wood - Central PA
 

If you guys need these moved from Penn to Nebraska I know people in these directions and I could get a few favors and some gas money to some people to make this happen if there is no rush. Shoot me a PM if need any help...Jay

Re: NOS bed wood - Central PA
 

great offer Jay... I'll let Mark work on the shipping...

Re: NOS bed wood - Central PA
 

Yep. This is the third set I've seen. It has all been black too.

Re: NOS bed wood - Central PA
 

Mike, You have exactly what can be used for a swb fleetside or a stepside. If you measure the fall off from 103" from those 4 boards you have the 4 short pieces covered on the outside of the fleetside floor. I remember I ran into this figuring the one longbox out I did from GM wood back 25 years ago when this wood was cheeper from GM than buying 10 footers and cutting them down for 8'2 pieces. I sure wish I could make this work out to build an ultimate survivor style pickup but the shipping and timing is just a hassle. Thanks, Mark

Re: NOS bed wood - Central PA
 

That's a good thought, but a guy would have to recut the outside groove, no biggie but the width is different. According to GMC Pauls the outer boards are 6 3/8" and the big boards are currently 7 7/16"...

I understand about the shipping... no problem

Re: NOS bed wood - Central PA
 

I tell you what Mike, I would much rather have the matching coal black southern pine to trim down and redrill as necessary than to try and find those original little pieces and with the same patina of the wood you have. You have a pinochle there of original pieces for some originality nut like me. I wish I didnt have money going out for three frame up restorations going on at this time. My 60 Vette project is double the dollars I had thought. If I were you I would have that beautiful wood in your 68 swb. That is just plain sweet. Mark

Re: NOS bed wood - Central PA
 

My cabinet guy is getting a quote to reproduce some wood for my truck. If the price is right then these will sell, if not then i'll think about installing in my truck...

What do you think walnut would look like with SS strips?

Re: NOS bed wood - Central PA
 

That would look great. My personal choice is going away from the oak and polished look so many show trucks have. I had planned until I saw your OEM wood, to use a yellow pine kit and seal and finish in automotive paint each board with base/clear gloss black and either powder coat black bed strips or use the polished stainless. I like the automotive paint system for the durability of washing and sun light.

Re: NOS bed wood - Central PA
 

i have a swb fleet. what else would be needed to install these?

Re: NOS bed wood - Central PA
 

Nothing extra needed, I looked into using this in my short fleet, you need to cut all the boards shorter (of course) and use the scrap from the longhorn boards to make the 4 short 6 3/8" (ripped down from 7 7/16") boards for in front and behind the wheelwell. The proper groove will still be present for your metal strip. A good tablesaw is all you need. You would then have extra 3 1/8"" boards that are only needed for a stepside and a few short scrap pieces from the center boards. I don't think they made special kits for short beds since you could build any set with this setup.

GMCpauls website has all the measurements.

call me if that sounds confusing (PM for number)

Re: NOS bed wood - Central PA
 

Could you pm me your number?

Re: NOS bed wood - Central PA
 

PM sent

Re: NOS bed wood - Central PA
 

msgross, you should wipe the wood down, dust it off, and retake the pics... Im still suprised it hasnt sold yet...

Re: NOS bed wood - Central PA
 

I need too, just haven't had time... with ALL the other NOS wood on the market i'm surprised too.. (sarcasm of course).


ttt.

Re: NOS bed wood - Central PA
 

ttt offers?

Re: NOS bed wood - Central PA
 

I REEEAAAAALLLLLY think you would sell it as soon as you cleaned it up and took more pics. ahaha...

Im curious to see how the wood cleans up. Would this stuff fit a short stepside?

Re: NOS bed wood - Central PA
 

yes it will fit..

clean or dirty it's NOS and nobody else has any...

ttt

Re: NOS bed wood - Central PA
 

I know that. I have been on the fence about it.. I just wanted to see how it looked clean. If i was doing a stock rebuild, i woulda JUMPED on that stuff.. Im baffled as to why it hasnt sold.

Re: NOS bed wood - Central PA
 

I'll be cleaning it up in the next week or two.. I just haven't had time...

ttt

Re: NOS bed wood - Central PA
 

ttt

Re: NOS bed wood - Central PA
 

ttt

Re: NOS bed wood - Central PA
 

ttt

Re: NOS bed wood - Central PA
 

Very :cool:

Re: NOS bed wood - Central PA
 

thanks...

FYI I can haul this between PA and IN in July if it sweetens the deal...

Re: NOS bed wood - Central PA
 

ttt