Spicer Hubs and Parts
 

#1 Spicer Big Hub parts lot..lots of good used parts, everything goes! 300.00 plus shipping. Includes, 12 hub bodies 18 retainers 16 axle gears 8 cam actuators 17 housing gears 13 springs 20 rear bushings 70 cap screw bolts 66 conical washers 3 knob pins 10 knob retaining rings 3 knob seals 10 cam retaining rings.

#2 Spicer Hubs, Yellow knobs with very nice retainers, NOS axle gears and rear bushings 200.00 plus shipping

#3 Spicer NOS 1/2 Ton retainers with Blue knobs, 12 cap screws, 12 bronze seal washers, 2 retainer seals and 2 knob seals ALL NOS! 325.00 plus shipping

#4 Spicer NOS 3/4 Ton Big Hub retainer, Blue knob and seal ALL NOS! 200.00 plus shipping

#5 Spicer Big Hub retainer, this is a very nice retainer..if it was used it wasnt on a truck for very long. This one is GM second design o-ring seal and comes with the correct o-ring..accepts all knobs even Ford. 50.00 plus shipping

#6 Spicer 1/2 Ton retainer seals [o-rings] I have 4 pair left, 10 per pair shipped.

Pics #1

Re: Spicer Hubs and Parts
 

Pics #2

Re: Spicer Hubs and Parts
 

Pics #3

Re: Spicer Hubs and Parts
 

Pics #4

Re: Spicer Hubs and Parts
 

Pics #5

Re: Spicer Hubs and Parts
 

Wow. That's all I can say. Very nice parts.
Posted via Mobile Device

Re: Spicer Hubs and Parts
 

Rob,

I will take #5

Re: Spicer Hubs and Parts
 

Rob-
I'll take pic #4 NOS spicer big hub. PM me the total. My zip is 63301. Let me know if paypal works.
Thanks-
Ray

Re: Spicer Hubs and Parts
 

Also #1 if you'd do free shipping for those with #5. Either way I will take #5.

Jud

Re: Spicer Hubs and Parts
 

I'll take #3-pm pay info I'll worry about ship later

Re: Spicer Hubs and Parts
 

#3 Do you have a set of NOS 1/2 ton blue knobs? I have the rest. I have a set of NOS Yellow - and other NOS parts for these / horse trading is a option.

Also, #1 - I take the single Blue knob, If available - I have another in same shape to create a pair. Thanks David

Re: Spicer Hubs and Parts
 

Rob, you finally get around to sorting through all that stuff, lol.

Re: Spicer Hubs and Parts
 

I'll take #3 if gets to me. Thanks

Re: Spicer Hubs and Parts
 

None of the big ones will fit Dana 60 will they?
Posted via Mobile Device

Re: Spicer Hubs and Parts
 

Rob I'll take two sets of the 1/2 ton O-rings (#6). If you happen to have more blue 3/4 dials count me in. Thanks, Pete

Re: Spicer Hubs and Parts
 

I will take #2 please pm me the payment info.

Re: Spicer Hubs and Parts
 

Tony, FYI I have a set of stainless steel bolts to go with these already included with your truck. The whole combination should luck sharp, especially if you repaint the yellow dials!

Re: Spicer Hubs and Parts
 

Thanks guys, sending PMs now

Re: Spicer Hubs and Parts
 

Jud that sounds great, I am buying this set so I can have them re-done.

Re: Spicer Hubs and Parts
 

Yep!! still going thru boxes of stuff! I'm going to try and finish it up this week...its only been about 6 years!

Your correct, those parts are for the older Dana 44 only, I did have a bunch of the early Dana 60 stuff but got rid of all of it a few years ago

Re: Spicer Hubs and Parts
 

Rob and Mike,

That is a nice set up there!!

Re: Spicer Hubs and Parts
 

I agree Ray, Where does Rob get all this stuff !

Re: Spicer Hubs and Parts
 

Rob-
I sent the moneyorder today. PM me when it arrives.
Thanks-
Ray

Re: Spicer Hubs and Parts
 

Blazerman,
do you still have any parts for these? I need at least 2 knobs, 2 cams and 2 pins that tie the 2 together. would love to find a place to get the knobs made of aluminum and cams made of stainless steel.
Im in the St Louis MO area if that helps. dont know hpw close to you.
Mitch

Re: Spicer Hubs and Parts
 

Wow! I missed this one.

Re: Spicer Hubs and Parts
 

anyone know where to get a pin for the accuator knobs or size/type pins used that go through them and the cam?
Mitch

Re: Spicer Hubs and Parts
 

This is what I have. I am missing a piece on the bottom side. I don't know what its called, but I was wondering if you have any more of them? Hopefully you can see the missing piece I'm talking about. I am also looking for new chrome rings as well. Mine are slightly chewed up and the bolt holes are too. Also looking for a new blue piece that isnt broken like mine. Maybe an alan head bolt too?

Thanks

Re: Spicer Hubs and Parts
 

You are not the only one Frank :waah:

Re: Spicer Hubs and Parts
 

This is a new site for me. Not sure now it works. I need the large o ring and the little copper washers for by dane hubs. The chrome pcs. I see them in the last photo. Are you willing to part with 2 rings and a package of copper washer. If so how do we proceed. If you reply on this site I hope that I can figure it out or use my email as

jrenaud@orbitelcom.com

Thank you

Jim

Re: Spicer Hubs and Parts
 

Would like to purchase some o rings and washer. Please advice as to cost and how to purchase. Thank you

Re: Spicer Hubs and Parts
 

Would you have the ability to come up with another set of pic 4 I would love to get a set.

Re: Spicer Hubs and Parts
 

Do you all realize this post is over 4 years old?

Re: Spicer Hubs and Parts
 

I guess that's a NO.

Re: Spicer Hubs and Parts
 

Sorry guys for not getting to this sooner. I have got rid of all my old Spicer parts. If I ever come up with anymore you all will be tbe first to know.