MO Spicer Hubs and Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 11-21-2012, 12:50 AM

#1 Spicer Big Hub parts lot..lots of good used parts, everything goes! 300.00 plus shipping. Includes, 12 hub bodies 18 retainers 16 axle gears 8 cam actuators 17 housing gears 13 springs 20 rear bushings 70 cap screw bolts 66 conical washers 3 knob pins 10 knob retaining rings 3 knob seals 10 cam retaining rings.

#2 Spicer Hubs, Yellow knobs with very nice retainers, NOS axle gears and rear bushings 200.00 plus shipping

#3 Spicer NOS 1/2 Ton retainers with Blue knobs, 12 cap screws, 12 bronze seal washers, 2 retainer seals and 2 knob seals ALL NOS! 325.00 plus shipping

#4 Spicer NOS 3/4 Ton Big Hub retainer, Blue knob and seal ALL NOS! 200.00 plus shipping

#5 Spicer Big Hub retainer, this is a very nice retainer..if it was used it wasnt on a truck for very long. This one is GM second design o-ring seal and comes with the correct o-ring..accepts all knobs even Ford. 50.00 plus shipping

#6 Spicer 1/2 Ton retainer seals [o-rings] I have 4 pair left, 10 per pair shipped.

Pics #1

BLAZERMAN · 11-21-2012, 12:51 AM

Pics #2

BLAZERMAN · 11-21-2012, 12:52 AM

Pics #3

BLAZERMAN · 11-21-2012, 12:53 AM

Pics #4

BLAZERMAN · 11-21-2012, 12:54 AM

Pics #5

Tuff Gong · 11-21-2012, 01:00 AM

Wow. That's all I can say. Very nice parts.
Posted via Mobile Device

Vintage Windmills · 11-21-2012, 01:27 AM

Rob,

I will take #5

supercheyenne1972 · 11-21-2012, 01:28 AM

Rob-
I'll take pic #4 NOS spicer big hub. PM me the total. My zip is 63301. Let me know if paypal works.
Thanks-
Ray

Vintage Windmills · 11-21-2012, 01:32 AM

Also #1 if you'd do free shipping for those with #5. Either way I will take #5.

Jud

**72ironmike** · 11-21-2012, 07:35 AM

I'll take #3-pm pay info I'll worry about ship later

**D.PASSMORE** · 11-21-2012, 07:39 AM

#3 Do you have a set of NOS 1/2 ton blue knobs? I have the rest. I have a set of NOS Yellow - and other NOS parts for these / horse trading is a option.

Also, #1 - I take the single Blue knob, If available - I have another in same shape to create a pair. Thanks David

teeitup · 11-21-2012, 09:31 AM

Rob, you finally get around to sorting through all that stuff, lol.

47thriftmaster · 11-21-2012, 09:54 AM

I'll take #3 if gets to me. Thanks

flat68 · 11-21-2012, 10:27 AM

None of the big ones will fit Dana 60 will they?
Posted via Mobile Device

**DeadheadNM** · 11-21-2012, 11:45 AM

Rob I'll take two sets of the 1/2 ton O-rings (#6). If you happen to have more blue 3/4 dials count me in. Thanks, Pete

Littletony · 11-21-2012, 01:23 PM

I will take #2 please pm me the payment info.

Vintage Windmills · 11-21-2012, 03:55 PM

Quote:

Originally Posted by Littletony

I will take #2 please pm me the payment info.

Tony, FYI I have a set of stainless steel bolts to go with these already included with your truck. The whole combination should luck sharp, especially if you repaint the yellow dials!

BLAZERMAN · 11-21-2012, 11:44 PM

Thanks guys, sending PMs now

Littletony · 11-21-2012, 11:48 PM

Jud that sounds great, I am buying this set so I can have them re-done.

BLAZERMAN · 11-22-2012, 12:41 AM

Quote:

Originally Posted by teeitup

Rob, you finally get around to sorting through all that stuff, lol.

Yep!! still going thru boxes of stuff! I'm going to try and finish it up this week...its only been about 6 years!

Quote:

Originally Posted by flat68

None of the big ones will fit Dana 60 will they?
Posted via Mobile Device

Your correct, those parts are for the older Dana 44 only, I did have a bunch of the early Dana 60 stuff but got rid of all of it a few years ago

**72 Super** · 11-22-2012, 11:00 AM

Quote:

Originally Posted by 72ironmike

I'll take #3-pm pay info I'll worry about ship later

Rob and Mike,

That is a nice set up there!!

**72ironmike** · 11-23-2012, 09:44 AM

Quote:

Originally Posted by 72 Super

Rob and Mike,

That is a nice set up there!!

I agree Ray, Where does Rob get all this stuff !

supercheyenne1972 · 11-25-2012, 12:15 AM

Rob-
I sent the moneyorder today. PM me when it arrives.
Thanks-
Ray

Rockets · 01-17-2013, 02:43 PM

Blazerman,
do you still have any parts for these? I need at least 2 knobs, 2 cams and 2 pins that tie the 2 together. would love to find a place to get the knobs made of aluminum and cams made of stainless steel.
Im in the St Louis MO area if that helps. dont know hpw close to you.
Mitch

PICKMUP · 01-17-2013, 03:01 PM

Wow! I missed this one.

11-21-2012, 01:27 AM	#7
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Spicer Hubs and Parts Rob, I will take #5 __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-21-2012, 01:28 AM	#8
supercheyenne1972 Registered User Join Date: Feb 2009 Location: St. Charles Missouri Posts: 133	Re: Spicer Hubs and Parts Rob- I'll take pic #4 NOS spicer big hub. PM me the total. My zip is 63301. Let me know if paypal works. Thanks- Ray

11-21-2012, 01:32 AM	#9
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Spicer Hubs and Parts Also #1 if you'd do free shipping for those with #5. Either way I will take #5. Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-21-2012, 07:35 AM	#10
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,056	Re: Spicer Hubs and Parts I'll take #3-pm pay info I'll worry about ship later

11-21-2012, 07:39 AM	#11
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: Spicer Hubs and Parts #3 Do you have a set of NOS 1/2 ton blue knobs? I have the rest. I have a set of NOS Yellow - and other NOS parts for these / horse trading is a option. Also, #1 - I take the single Blue knob, If available - I have another in same shape to create a pair. Thanks David __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-21-2012, 12:50 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Spicer Hubs and Parts #1 Spicer Big Hub parts lot..lots of good used parts, everything goes! 300.00 plus shipping. Includes, 12 hub bodies 18 retainers 16 axle gears 8 cam actuators 17 housing gears 13 springs 20 rear bushings 70 cap screw bolts 66 conical washers 3 knob pins 10 knob retaining rings 3 knob seals 10 cam retaining rings. #2 Spicer Hubs, Yellow knobs with very nice retainers, NOS axle gears and rear bushings 200.00 plus shipping #3 Spicer NOS 1/2 Ton retainers with Blue knobs, 12 cap screws, 12 bronze seal washers, 2 retainer seals and 2 knob seals ALL NOS! 325.00 plus shipping #4 Spicer NOS 3/4 Ton Big Hub retainer, Blue knob and seal ALL NOS! 200.00 plus shipping #5 Spicer Big Hub retainer, this is a very nice retainer..if it was used it wasnt on a truck for very long. This one is GM second design o-ring seal and comes with the correct o-ring..accepts all knobs even Ford. 50.00 plus shipping #6 Spicer 1/2 Ton retainer seals [o-rings] I have 4 pair left, 10 per pair shipped. Pics #1 Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 12:51 AM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Spicer Hubs and Parts Pics #2 Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 12:52 AM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Spicer Hubs and Parts Pics #3 Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 12:53 AM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Spicer Hubs and Parts Pics #4 Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 12:54 AM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Spicer Hubs and Parts Pics #5 Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 01:00 AM	#6
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,179	Re: Spicer Hubs and Parts Wow. That's all I can say. Very nice parts. Posted via Mobile Device

11-21-2012, 09:31 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Spicer Hubs and Parts Rob, you finally get around to sorting through all that stuff, lol. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2012, 09:54 AM	#13
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Spicer Hubs and Parts I'll take #3 if gets to me. Thanks

11-21-2012, 10:27 AM	#14
flat68 Registered User Join Date: Sep 2007 Location: Brooks alberta canada Posts: 85	Re: Spicer Hubs and Parts None of the big ones will fit Dana 60 will they? Posted via Mobile Device

11-21-2012, 11:45 AM	#15
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,480	Re: Spicer Hubs and Parts Rob I'll take two sets of the 1/2 ton O-rings (#6). If you happen to have more blue 3/4 dials count me in. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

11-21-2012, 01:23 PM	#16
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 597	Re: Spicer Hubs and Parts I will take #2 please pm me the payment info. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

11-21-2012, 11:44 PM	#18
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Spicer Hubs and Parts Thanks guys, sending PMs now __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

11-21-2012, 11:48 PM	#19
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 597	Re: Spicer Hubs and Parts Jud that sounds great, I am buying this set so I can have them re-done. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

11-25-2012, 12:15 AM	#23
supercheyenne1972 Registered User Join Date: Feb 2009 Location: St. Charles Missouri Posts: 133	Re: Spicer Hubs and Parts Rob- I sent the moneyorder today. PM me when it arrives. Thanks- Ray

01-17-2013, 02:43 PM	#24
Rockets Registered User Join Date: Jan 2013 Location: st peters mo Posts: 2	Re: Spicer Hubs and Parts Blazerman, do you still have any parts for these? I need at least 2 knobs, 2 cams and 2 pins that tie the 2 together. would love to find a place to get the knobs made of aluminum and cams made of stainless steel. Im in the St Louis MO area if that helps. dont know hpw close to you. Mitch

01-17-2013, 03:01 PM	#25
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: Spicer Hubs and Parts Wow! I missed this one. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

Register or Log In To remove these advertisements.