Parting out 69 GMC 1/2 ton truck
 

I just picked this truck up and are going to start parting it out as soon as anyone needs anything.
Let me know what you need and I can get you some prices as well as pics
I do not have a list of prices to post at this point because I want to see what parts are going to be needed first, as far as where to start. I saw there was a thread saying "not to hog the parts board with individual listings" so I thought this was a good way to make sure I wasn't doing that.
thanks for checking out our thread. Jenn (Jeremiah's wife)

Re: Parting out 69 GMC 1/2 ton truck
 

How much for glovebox emblem? Can u get me a close up pic?
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

Does it have engine?
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

Nope, no engine. It was a small block truck originally.

Re: Parting out 69 GMC 1/2 ton truck
 

Passenger kick panel vent actuator " bracket, arm and spring ". Does it have these? I already have the vac actuator itself, but am in need of these items to get it connected. If so, a close up pic would be appreciated.
Thanks.

Re: Parting out 69 GMC 1/2 ton truck
 

I probably have it in a few cabs out here, Let me see what I got for you. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Sunvisors & clips, dash pad and armrest, condition and shipped price? 30530 Close up pictures.

Re: Parting out 69 GMC 1/2 ton truck
 

how much for the hood GMC emblem? 72205.

Re: Parting out 69 GMC 1/2 ton truck
 

I'm interested in the following items: armrests, door panel hardware if usable,
glove box & mounting hardware, shift ind & pointer, ac ball & center vents &
hardware. Pics & prices plz. 22630 zip. Thanks Jamie 71 :gmc2: Longhorn

Re: Parting out 69 GMC 1/2 ton truck
 

Your going to need to price some of the parts to get this in compliance.

Re: Parting out 69 GMC 1/2 ton truck
 

2nd in line for arm rests.

Re: Parting out 69 GMC 1/2 ton truck
 

How is that tailgate? It looks like it's pushed in a little?

Re: Parting out 69 GMC 1/2 ton truck
 

Thank you for the message, I am working on it! Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

You are correct, although it is worse than the picture shows. Thanks for asking. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

I would like the engine mounts if they are good shape and for a small block, quote to 48030 and some pics?
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

hi Jenn, i would be interested in fuel valve and bezel, fuel tank dash switch and wiring, and also the drivers side saddle tank and sending unit, if working.
shipping to 48001.
and no hurry on shipping.
thank you,
Dave

Re: Parting out 69 GMC 1/2 ton truck
 

How about the headlight bezels ? I'd like them. If the grille in good condition I'd like that too. Please let me know.
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

Also if the fender/hood trim are good I'd like those as well. The trim above and to the side of the grille if you know what I mean.
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

I like to call that eyebrow trim, what about the top trim on the grille? I will get you a price and pics asap. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

Gauge cluster price shipped to 21122. Hoping it was a V8 :)

Re: Parting out 69 GMC 1/2 ton truck
 

I would like to get in line on the fender/eyebrow trim.

Re: Parting out 69 GMC 1/2 ton truck
 

Yes the top trim of the grill as well.
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

I would like to get inline on the upper grill trim pending the price. Also, do you have keys for the locks on the fuel doors? Thanks

Re: Parting out 69 GMC 1/2 ton truck
 

I don't want to sell just the emblem on this one. The box is to nice. thanks Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

GMC Hood Emblems - $30 shipped
Typical chrome imperfections, "C" letter has little pitting.

Small Block Motor mounts - $40 shipped

Re: Parting out 69 GMC 1/2 ton truck
 

Glove Box door with Hardware - $30 shipped (has sticker)

AC Balls have little overspray (drivers side ball is looks loose in pic) I need to double check - $25 shipped

Re: Parting out 69 GMC 1/2 ton truck
 

Dash Pad is nice, I don't see any cracks. still pliable just dirty - $50 shipped

Gauge Cluster (lense has small lines in it) - $50 shipped yes it was a small block 350. Was working as far as I know. He drove it 2 weeks ago.

Re: Parting out 69 GMC 1/2 ton truck
 

Any word on the grill.headlight bezels,eyebrow trim,and the hood trim ? Do they have any dents or damage ?

Re: Parting out 69 GMC 1/2 ton truck
 

Original GMC door panels. Passenger side deffinatlly nicer than driver, not sure what is wrong with drivers side, you can see creases in it. Don't know if anyone is insterested in them. Let me know.

Re: Parting out 69 GMC 1/2 ton truck
 

They are coming up in a few minutes. I don't know what Jeremiah wants for it yet, but here are pics

Re: Parting out 69 GMC 1/2 ton truck
 

Grille to me looks SUPER nice, it doesn't have that rust on the bottom by the turn signals as most do. There is a few small dents in the very bottom (pictured) and there is a small dent on the top bar. The eyebrows are nice also, but the passenger has what looks like rust coming from under the chrome. Headlight bezels are nice, not alot of rust on the underside like most. There are some imperfections as you can see, but VERY mininal on all of these parts. I am working on getting prices on these asap.

Re: Parting out 69 GMC 1/2 ton truck
 

passenger eyebrow trim

Re: Parting out 69 GMC 1/2 ton truck
 

i`ll take the dash pad if it makes it to me.

Re: Parting out 69 GMC 1/2 ton truck
 

I'll pass on the engine mounts. Thanks for your time though Jenn
Posted via Mobile Device

Re: Parting out 69 GMC 1/2 ton truck
 

Thank you Ma'am...:)

Re: Parting out 69 GMC 1/2 ton truck
 

If the defrost vents are saddle, I'm interested. Also the SB AC fan shroud if it has one. And the plastic grommets that insert into the frame to protect the parking brake cable where it passes through.

Re: Parting out 69 GMC 1/2 ton truck
 

Hey Dave, There is a fuel transfer switch in this one, but no bezel or wiring and no sender. Sorry. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

No problem, anytime!

Re: Parting out 69 GMC 1/2 ton truck
 

Hey Jim, How's it going? The defrost vents are shot and no fan shroud, I am sure I have the grommet you are talking about. Let me check today. Also do you still need those extra brake lines or did you fab them yourself? let me know. Jenn

Re: Parting out 69 GMC 1/2 ton truck
 

jeremiah king ill pass on the cluster.

Thank you for your time and effort.