Suburban rear half part out/cuts
 

Do not private message me before inquiring in the thread.

Everything from the rear of the back doors is up for grabs. Rusted parts cut off and thrown out. As of right now I can ship out USPS on a daily basis, Bigger items are more difficult and may take a few days due to my work schedule. All rust or dents will be shown and circled. If you only need part of an item let me know and we’ll see if we can make a deal. Possible barter/trade for body parts that will help with my build

1
Rear hatch style sill plate, pinholes in center where barn doors would latch, seen better and worse but still intact and useable $60

Re: Suburban rear half part out/cuts
 

2
Passenger side lower window frame
$60

Re: Suburban rear half part out/cuts
 

3
Upper rear sill hatch style
$50

Re: Suburban rear half part out/cuts
 

Scrapped

Re: Suburban rear half part out/cuts
 

Scrapped


5
Driver side rear lower window frame
$50

Re: Suburban rear half part out cuts/hardware/glass
 

Scrapped


6
Passenger side tailgate latch/lower d-pillar
$60 With hardware
$35 Without hardware
$25 Hardware only, support bolt & latch receiver plate

Re: Suburban rear half part out/cuts
 

Scrapped


7
Upper 1/2 D-pillar
$25

Re: Suburban rear half part out/cuts
 

8
Jack mounting bracket
$25

Re: Suburban rear half part out/cuts
 

9
Rear driver side upper window frame
$50

Re: Suburban rear half part out/cuts
 

Scrapped

10
Passenger rear wheel well
$50

Re: Suburban rear half part out/cuts
 

11
Passenger rear trim panel bracket
$15

Re: Suburban rear half part out/cuts
 

Scrapped

Re: Suburban rear half part out/cuts
 

Scrapped

Re: Suburban rear half part out/cuts
 

Scrapped

Re: Suburban rear half part out/cuts
 

Sold!!!

15
Drivers taillight corner
$70 as pictured
$50 without hardware
$25 Hardware only, support bolt & latch receiver plate
$20 12”x12” cuts
$15 tail or reverse buckets

Re: Suburban rear half part out/cuts
 

Sold!!!

16
Passenger tail panel
$50 as pictured
$20 12”x12” cuts
$15 taillight bucket
$10 reverse bucket not in too good of shape, fell off

Re: Suburban rear half part out/cuts
 

Rust as show. In the upper middle sill area
D-pillar, roof area, and inner roof structure solid

$150 as is
$80 cut down the middle
$70 each corner trimmed to ship
Corners look like I could trim 1.5” in both directions and they would fit in a large flat rate box

Re: Suburban rear half part out/cuts
 

Additional

Re: Suburban rear half part out/cuts
 

Sold entire gate

Functioning eat up tailgate, key turns and locks/unlocks
$100 as pictured including key
$50 without any hardware
$75 for all hardware(latches,linkage,supports, push button w/ key, anything that unbolts)
$15 cuts up to 12”x12”
$20 for cut around push button
$55 cut with push button including key
$75 for anything that’ll fit in a large flat rate or message board flat rate(including the key with push button)

Re: Suburban rear half part out/cuts
 

Sold

Upper hatch
$75 as pictured
$20 handle
$15-$20 up to 12”x12” cuts
$50 shipped for anything that’ll fit in a large flate rate, including cuts and I’ll scrap the rest.

Re: Suburban rear half part out/cuts
 

Yay last one

Re: Suburban rear half part out/cuts
 

Rear side glass
$50 for the pair

Re: Suburban rear half part out/cuts
 

Additional hatch and handle pictures. Handle is pretty rough

Re: Suburban rear half part out/cuts
 

If you need more than one item I’ll make bundle discounts

Re: Suburban rear half part out/cuts
 

Open to offers, don’t wanna scrap something that someone could use

Re: Suburban rear half part out/cuts
 

A couple items have been updated

Re: Suburban rear half part out/cuts
 

Looking for all parts that bolt to the upper hatch. Bolts, hinges, covers, screws, chrome damper thing, and the latch catch thing next to the damper thing. Will you take $45 for all of it?

Re: Suburban rear half part out/cuts
 

I can do that, should all fit in a medium flat rate so that’ll work. I’ll cut the skin away so I can spray the hinge bolts with wd40, worst case I’ll cut them loose and send it together. Paypal address is in my signature, I’m on nights this week so I should be able to get it out same or next day depending on when payment is sent.

Re: Suburban rear half part out/cuts
 

Payment sent. Thanks, Bret

Re: Suburban rear half part out/cuts
 

Got it. Weather permitting I should be able to get it done tomorrow afternoon.

Re: Suburban rear half part out/cuts
 

It’ll go out tomorrow. Post office was buried and I have to work tonight. All bolts came out clean, a couple will need to soak longer but did break loose no problem so I cut the sheet metal off so you can soak them some more

Re: Suburban rear half part out/cuts
 

Little update, have time now to separate things and ship bigger items if you can give me a few days

Re: Suburban rear half part out/cuts
 

PM sent, Need the inner housing that holds the rear backup housing

Re: Suburban rear half part out/cuts
 

This is all that is left of the reverse inner housings. Driver side is still in tact but the passenger side all that’s left is the actual light housing itself.

Re: Suburban rear half part out/cuts
 

Taking offers, reasonable offers that is

Re: Suburban rear half part out/cuts
 

Trim pics after a light Brillo pad

Re: Suburban rear half part out/cuts
 

Unfortunately I didn’t take this one off before cutting the body so it’s a little shorter than it’s supposed to be.

Re: Suburban rear half part out/cuts
 

Bump to offered.

Re: Suburban rear half part out/cuts
 

Can separate and ship by size and weight now.

Re: Suburban rear half part out/cuts
 

I'm looking for two side/park light cutouts.