Custom Billet Aluminum Dash Panels
 

I am going to try and do something differet with my gauge panels. I have had time to sit down with my programmer and we have come up with a way to be able to make a viable way to make the gauge panel in different configurations while using the same tooling.

So here it goes, We will be able to start making the dash panels in custom configurations and even make a blank panel wiith no holes for someone seeking to do their own work. The only limitation is you have to use the original center points for the gauges. Meaning I am going to change the diameter of the opening and the number of holes you want. I will not move the gauge openings to different locations.

I will delete the openings and lettering for the windshield wipers and headlights upon request.

But for this first round I will need to get a group to commit to this project so I don't get stuck doing one or two at a time. I will need at least 10 buyers. The price is going to be $295.00 per panel and I am going to need a $125.00 deposit. Once I get 10 people commited and I have approved their designs then I will collect the deposits and begin working on them and keep those buyers informed of the progress. Then I will collect the balance when the units are ready to be shipped. Price will include ground shipping and CA residents have to add sales tax.

For Reference you can look at these othere threads for the different panels I have made.
http://67-72chevytrucks.com/vboard/s...d.php?t=252902
http://67-72chevytrucks.com/vboard/s...d.php?t=374791

Please contact me through my email at ryan.hubbard@aspencontrols.com or through the forum pm. I will post updates of how many people have committed and will make a cutoff date once I see we have enough people committed.

Thanks for your continued interest and for those who have bought units in the past.

Re: Custom Billet Aluminum Dash Panels
 

Hey there,
Newbe here...
Tried to PM Ryan but it said his box was full. Does anyone know if his dash panels are still available?
Thanks,
Jonathan

Re: Custom Billet Aluminum Dash Panels
 

Welcome to the forum Jonathan :thumbs:

Have you tried sending him an email to the address he listed above?

Re: Custom Billet Aluminum Dash Panels
 

Hey Capt'n
Thank you for the welcome and reply.
I did email him twice and tried to PM (his PM box was full). Looking to get the dash w/instruments soon so I can install my 5.3 and wire harness...

Oh, just realized that you're the guy with the brackets for the wilwood D52 rear calipers- nice. Are the brackets still available?
Thanks again and will be posting pics of my resto
Jonathan

Re: Custom Billet Aluminum Dash Panels
 

Yes I still sell them......

Re: Custom Billet Aluminum Dash Panels
 

Are these still an option?

Re: Custom Billet Aluminum Dash Panels
 

+1

Re: Custom Billet Aluminum Dash Panels
 

Last Activity: Today 10:35 AM

Looks like he is still here , I really want these too , just not ready for them yet..

Re: Custom Billet Aluminum Dash Panels
 

Yeah I'd really like to have a set too.

Re: Custom Billet Aluminum Dash Panels
 

I am still here but I am not able to do any panels at the moment. I won some big contacts and have all my machines tied up for the next 3 years. I am trying to work out buying more machines but since the panels is a side job, I am not looking to run panels until I have a decent size run going. I still have some of the original panels left and glovebox doors.

Re: Custom Billet Aluminum Dash Panels
 

What do you have left left? I'm looking for the 5" outers with the 3 3/8" center, none of the lower four holes.

Re: Custom Billet Aluminum Dash Panels
 

i second that i want a cluster and glove box
but i want mine simal to stock setup

Re: Custom Billet Aluminum Dash Panels
 

I still have instock and ready to ship gauge panels that are setup to take two 5" Autometer gauges and five 2 1/16" autometer gauges. I also have some that will take two 5" Autometer gauges and one 3 3/8" Autometer gauge in the center and four 2 1/16" gauges along the bottom. These are available for $350 with a billet glove box door or for $225 for just the dash panel.

Re: Custom Billet Aluminum Dash Panels
 

I would like to see pictures of this setup.

Re: Custom Billet Aluminum Dash Panels
 

There are pictures in the second thread listed in my first post of this thread. If you purchase it and decide it won't work for you just ship it back and I will refund your money.
Posted via Mobile Device

Re: Custom Billet Aluminum Dash Panels
 

Anything for 73-79 in the future ?

Re: Custom Billet Aluminum Dash Panels
 

PM sent

Re: Custom Billet Aluminum Dash Panels
 

Payment sent.

Re: Custom Billet Aluminum Dash Panels
 

so $125 for a glovebox?

Re: Custom Billet Aluminum Dash Panels
 

Yes and that includes ground shipping.

Re: Custom Billet Aluminum Dash Panels
 

Ryan, If you still have some left I will take 1 dash panel with the two 5" Autometer gauges and five 2 1/16" autometer gauges setup and a billet glove box lid. If so how do you take payment and I will get it out as soon as I hear from you! Mike

Re: Custom Billet Aluminum Dash Panels
 

Yes I still have a couple left. I can either take paypal at ryan.hubbard@aspencontrols.com or you can call me at 562-537-1348 and I can take your visa or Mastercard number over the phone.

Re: Custom Billet Aluminum Dash Panels
 

Ryan, $350 submitted through paypal for both items. My paypal (ebay) username is "tvpowdercoating"
If the address does note show on the payment transaction let me know. Thanks, Mike

Re: Custom Billet Aluminum Dash Panels
 

Received payment and the parts will ship tomorrow.
Posted via Mobile Device

Re: Custom Billet Aluminum Dash Panels
 

wow what an awesome product thanks so much very nice workmanship