Custom Billet Aluminum Dash Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Hubbard · 06-25-2010, 01:47 PM

I am going to try and do something differet with my gauge panels. I have had time to sit down with my programmer and we have come up with a way to be able to make a viable way to make the gauge panel in different configurations while using the same tooling.

So here it goes, We will be able to start making the dash panels in custom configurations and even make a blank panel wiith no holes for someone seeking to do their own work. The only limitation is you have to use the original center points for the gauges. Meaning I am going to change the diameter of the opening and the number of holes you want. I will not move the gauge openings to different locations.

I will delete the openings and lettering for the windshield wipers and headlights upon request.

But for this first round I will need to get a group to commit to this project so I don't get stuck doing one or two at a time. I will need at least 10 buyers. The price is going to be $295.00 per panel and I am going to need a $125.00 deposit. Once I get 10 people commited and I have approved their designs then I will collect the deposits and begin working on them and keep those buyers informed of the progress. Then I will collect the balance when the units are ready to be shipped. Price will include ground shipping and CA residents have to add sales tax.

For Reference you can look at these othere threads for the different panels I have made.
http://67-72chevytrucks.com/vboard/s...d.php?t=252902
http://67-72chevytrucks.com/vboard/s...d.php?t=374791

Please contact me through my email at ryan.hubbard@aspencontrols.com or through the forum pm. I will post updates of how many people have committed and will make a cutoff date once I see we have enough people committed.

Thanks for your continued interest and for those who have bought units in the past.

CHP c-10 · 11-30-2010, 09:09 AM

Hey there,
Newbe here...
Tried to PM Ryan but it said his box was full. Does anyone know if his dash panels are still available?
Thanks,
Jonathan

**Captainfab** · 12-01-2010, 01:20 AM

Welcome to the forum Jonathan

Have you tried sending him an email to the address he listed above?

Quote:

Originally Posted by CHP c-10

Hey there,
Newbe here...
Tried to PM Ryan but it said his box was full. Does anyone know if his dash panels are still available?
Thanks,
Jonathan

CHP c-10 · 12-01-2010, 11:18 AM

Hey Capt'n
Thank you for the welcome and reply.
I did email him twice and tried to PM (his PM box was full). Looking to get the dash w/instruments soon so I can install my 5.3 and wire harness...

Oh, just realized that you're the guy with the brackets for the wilwood D52 rear calipers- nice. Are the brackets still available?
Thanks again and will be posting pics of my resto
Jonathan

**Captainfab** · 12-02-2010, 12:11 AM

Yes I still sell them......

Quote:

Originally Posted by CHP c-10

Hey Capt'n
Thank you for the welcome and reply.
I did email him twice and tried to PM (his PM box was full). Looking to get the dash w/instruments soon so I can install my 5.3 and wire harness...

Oh, just realized that you're the guy with the brackets for the wilwood D52 rear calipers- nice. Are the brackets still available?Thanks again and will be posting pics of my resto
Jonathan

Fesser · 12-08-2010, 10:33 AM

Are these still an option?

**Hart_Rod** · 12-08-2010, 02:11 PM

Quote:

Originally Posted by fesser

are these still an option?

+1

ksbrktracer · 12-08-2010, 05:40 PM

Last Activity: Today 10:35 AM

Looks like he is still here , I really want these too , just not ready for them yet..

Jparks · 12-09-2010, 12:19 PM

Yeah I'd really like to have a set too.

Ryan Hubbard · 01-03-2011, 04:35 PM

I am still here but I am not able to do any panels at the moment. I won some big contacts and have all my machines tied up for the next 3 years. I am trying to work out buying more machines but since the panels is a side job, I am not looking to run panels until I have a decent size run going. I still have some of the original panels left and glovebox doors.

Jparks · 01-03-2011, 05:13 PM

What do you have left left? I'm looking for the 5" outers with the 3 3/8" center, none of the lower four holes.

1971custom · 01-04-2011, 12:49 AM

i second that i want a cluster and glove box
but i want mine simal to stock setup

Ryan Hubbard · 01-05-2011, 03:20 PM

I still have instock and ready to ship gauge panels that are setup to take two 5" Autometer gauges and five 2 1/16" autometer gauges. I also have some that will take two 5" Autometer gauges and one 3 3/8" Autometer gauge in the center and four 2 1/16" gauges along the bottom. These are available for $350 with a billet glove box door or for $225 for just the dash panel.

**Hart_Rod** · 01-05-2011, 09:45 PM

Quote:

Originally Posted by Ryan Hubbard

I also have some that will take two 5" Autometer gauges and one 3 3/8" Autometer gauge in the center and four 2 1/16" gauges along the bottom. These are available for $350 with a billet glove box door or for $225 for just the dash panel.

I would like to see pictures of this setup.

Ryan Hubbard · 01-05-2011, 11:07 PM

Quote:

Originally Posted by Hart_Rod

I would like to see pictures of this setup.

There are pictures in the second thread listed in my first post of this thread. If you purchase it and decide it won't work for you just ship it back and I will refund your money.
Posted via Mobile Device

v502 · 01-08-2011, 01:28 PM

Anything for 73-79 in the future ?

**Hart_Rod** · 01-08-2011, 05:34 PM

Quote:

Originally Posted by Ryan Hubbard

There are pictures in the second thread listed in my first post of this thread. If you purchase it and decide it won't work for you just ship it back and I will refund your money.
Posted via Mobile Device

PM sent

**Hart_Rod** · 01-20-2011, 06:35 PM

Quote:

Originally Posted by Ryan Hubbard

There are pictures in the second thread listed in my first post of this thread. If you purchase it and decide it won't work for you just ship it back and I will refund your money.
Posted via Mobile Device

Payment sent.

SWB4x4 · 01-21-2011, 01:19 PM

so $125 for a glovebox?

Ryan Hubbard · 01-23-2011, 05:58 PM

Quote:

Originally Posted by SWB4x4

so $125 for a glovebox?

Yes and that includes ground shipping.

67C10SWB · 02-02-2011, 02:36 AM

Ryan, If you still have some left I will take 1 dash panel with the two 5" Autometer gauges and five 2 1/16" autometer gauges setup and a billet glove box lid. If so how do you take payment and I will get it out as soon as I hear from you! Mike

Ryan Hubbard · 02-02-2011, 10:18 AM

Quote:

Originally Posted by 67C10SWB

Ryan, If you still have some left I will take 1 dash panel with the two 5" Autometer gauges and five 2 1/16" autometer gauges setup and a billet glove box lid. If so how do you take payment and I will get it out as soon as I hear from you! Mike

Yes I still have a couple left. I can either take paypal at ryan.hubbard@aspencontrols.com or you can call me at 562-537-1348 and I can take your visa or Mastercard number over the phone.

67C10SWB · 02-02-2011, 03:26 PM

Ryan, $350 submitted through paypal for both items. My paypal (ebay) username is "tvpowdercoating"
If the address does note show on the payment transaction let me know. Thanks, Mike

Ryan Hubbard · 02-02-2011, 03:59 PM

Received payment and the parts will ship tomorrow.
Posted via Mobile Device

1971custom · 02-04-2011, 11:03 PM

wow what an awesome product thanks so much very nice workmanship

06-25-2010, 01:47 PM	#1
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Custom Billet Aluminum Dash Panels I am going to try and do something differet with my gauge panels. I have had time to sit down with my programmer and we have come up with a way to be able to make a viable way to make the gauge panel in different configurations while using the same tooling. So here it goes, We will be able to start making the dash panels in custom configurations and even make a blank panel wiith no holes for someone seeking to do their own work. The only limitation is you have to use the original center points for the gauges. Meaning I am going to change the diameter of the opening and the number of holes you want. I will not move the gauge openings to different locations. I will delete the openings and lettering for the windshield wipers and headlights upon request. But for this first round I will need to get a group to commit to this project so I don't get stuck doing one or two at a time. I will need at least 10 buyers. The price is going to be $295.00 per panel and I am going to need a $125.00 deposit. Once I get 10 people commited and I have approved their designs then I will collect the deposits and begin working on them and keep those buyers informed of the progress. Then I will collect the balance when the units are ready to be shipped. Price will include ground shipping and CA residents have to add sales tax. For Reference you can look at these othere threads for the different panels I have made. http://67-72chevytrucks.com/vboard/s...d.php?t=252902 http://67-72chevytrucks.com/vboard/s...d.php?t=374791 Please contact me through my email at ryan.hubbard@aspencontrols.com or through the forum pm. I will post updates of how many people have committed and will make a cutoff date once I see we have enough people committed. Thanks for your continued interest and for those who have bought units in the past. Last edited by Ryan Hubbard; 07-08-2010 at 12:46 PM.

11-30-2010, 09:09 AM	#2
CHP c-10 Registered User Join Date: Jul 2010 Location: Napa, CA Posts: 34	Re: Custom Billet Aluminum Dash Panels Hey there, Newbe here... Tried to PM Ryan but it said his box was full. Does anyone know if his dash panels are still available? Thanks, Jonathan

12-01-2010, 11:18 AM	#4
CHP c-10 Registered User Join Date: Jul 2010 Location: Napa, CA Posts: 34	Re: Custom Billet Aluminum Dash Panels Hey Capt'n Thank you for the welcome and reply. I did email him twice and tried to PM (his PM box was full). Looking to get the dash w/instruments soon so I can install my 5.3 and wire harness... Oh, just realized that you're the guy with the brackets for the wilwood D52 rear calipers- nice. Are the brackets still available? Thanks again and will be posting pics of my resto Jonathan

12-08-2010, 10:33 AM	#6
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Custom Billet Aluminum Dash Panels Are these still an option?

12-08-2010, 05:40 PM	#8
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Custom Billet Aluminum Dash Panels Last Activity: Today 10:35 AM Looks like he is still here , I really want these too , just not ready for them yet..

12-09-2010, 12:19 PM	#9
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: Custom Billet Aluminum Dash Panels Yeah I'd really like to have a set too. __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

01-03-2011, 04:35 PM	#10
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Custom Billet Aluminum Dash Panels I am still here but I am not able to do any panels at the moment. I won some big contacts and have all my machines tied up for the next 3 years. I am trying to work out buying more machines but since the panels is a side job, I am not looking to run panels until I have a decent size run going. I still have some of the original panels left and glovebox doors.

01-03-2011, 05:13 PM	#11
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: Custom Billet Aluminum Dash Panels What do you have left left? I'm looking for the 5" outers with the 3 3/8" center, none of the lower four holes. __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

01-04-2011, 12:49 AM	#12
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: Custom Billet Aluminum Dash Panels i second that i want a cluster and glove box but i want mine simal to stock setup __________________ Last edited by 1971custom; 01-04-2011 at 12:50 AM.

01-05-2011, 03:20 PM	#13
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Custom Billet Aluminum Dash Panels I still have instock and ready to ship gauge panels that are setup to take two 5" Autometer gauges and five 2 1/16" autometer gauges. I also have some that will take two 5" Autometer gauges and one 3 3/8" Autometer gauge in the center and four 2 1/16" gauges along the bottom. These are available for $350 with a billet glove box door or for $225 for just the dash panel.

01-08-2011, 01:28 PM	#16
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: Custom Billet Aluminum Dash Panels Anything for 73-79 in the future ? __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

01-21-2011, 01:19 PM	#19
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Custom Billet Aluminum Dash Panels so $125 for a glovebox? __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140

02-02-2011, 02:36 AM	#21
67C10SWB Registered User Join Date: Aug 2007 Location: Meridian, Idaho Posts: 27	Re: Custom Billet Aluminum Dash Panels Ryan, If you still have some left I will take 1 dash panel with the two 5" Autometer gauges and five 2 1/16" autometer gauges setup and a billet glove box lid. If so how do you take payment and I will get it out as soon as I hear from you! Mike

02-02-2011, 03:26 PM	#23
67C10SWB Registered User Join Date: Aug 2007 Location: Meridian, Idaho Posts: 27	Re: Custom Billet Aluminum Dash Panels Ryan, $350 submitted through paypal for both items. My paypal (ebay) username is "tvpowdercoating" If the address does note show on the payment transaction let me know. Thanks, Mike

02-02-2011, 03:59 PM	#24
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Custom Billet Aluminum Dash Panels Received payment and the parts will ship tomorrow. Posted via Mobile Device



Register or Log In To remove these advertisements.

02-04-2011, 11:03 PM	#25
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: Custom Billet Aluminum Dash Panels wow what an awesome product thanks so much very nice workmanship __________________

Register or Log In To remove these advertisements.